 |
PHP / MySql |
 |
|
|
|
|
|
|
Recherche |
|
|
|
|
ManuelPHP.com |
|
|
|
|
|
|
|
. Manuel PHP
. Préface
. Au moment de commencer
. Installation et configuration
. Référence du langage
. Sécurité
. Caractéristiques
. Référence des fonctions
. PHP et le moteur interne Zend
. FAQ : foire Aux Questions
. Annexes
. Version HTML Help
. Index
|
Manuel PHP
1 Manuel PHP
1.1 translators
1.2 Copyright
2 Préface
2.1 Auteurs et Contributeurs
3 Au moment de commencer
3.1 Introduction
3.1.1 Qu'est ce que PHP?
3.1.2 Que peut faire PHP?
3.2 Une introduction à PHP
3.2.1 Le nécessaire
3.2.2 Votre première page PHP
3.2.3 Trucs pratiques
3.2.4 Utiliser un formulaire
3.2.5 Utiliser des codes anciens avec les nouvelles versions de PHP
3.2.6 Et après?
4 Installation et configuration
4.1 Considérations générales sur l'installation
4.2 Installation sous UNIX
4.2.1 Apache 1.3.x sur les systèmes Unix
4.2.1.1 Instructions d'installation de PHP (en module Apache)
4.2.1.2 Instructions d'installation (Installation en tant que module statique d'Apache) de PHP
4.2.2 Apache 2.0 sur les systèmes Unix
4.2.3 Caudium
4.2.3.1 Instructions d'installation Caudium
4.2.4 Installation avec les serveurs fhttpd
4.2.5 Installation sous Netscape et iPlanet Enterprise Serveur sur un système Sun Solaris
4.2.5.1 Environnement CGI et modification recommandées du php.ini
4.2.5.2 Utilisation particulière pour les pages d'erreurs ou les
listages spécifiques de dossier (PHP >= 4.3.3)
4.2.5.3 Note au sujet de nsapi_virtual et des requêtes (PHP >= 4.3.3)
4.2.6 CGI et configurations en ligne de commande
4.2.6.1 Tests
4.2.6.2 Performances
4.2.6.3 Utiliser les variables pré-définies
4.2.7 Installation sous HP-UX
4.2.8 Installations sur les systèmes OpenBSD
4.2.8.1 Utilisation des paquets binaires
4.2.8.1.1 Exemple d'installation de PHP sous OpenBSD avec Ports
4.2.8.2 Utilisation des ports
4.2.8.3 Problèmes courants
4.2.8.4 Versions plus anciennes
4.2.9 Installation sous Solaris
4.2.9.1 Logiciels nécessaires
4.2.9.2 Utilisation des packages
4.2.10 Installation sous Gentoo
4.2.10.1 Utilisation de Portage (emerge)
4.2.10.1.1 Exemple d'installation avec Apache 1.3 sous Gentoo
4.2.10.2 Meilleur contrôle de la configuration
4.2.10.2.1 Récupération de la liste des flags USE
4.2.10.2.2 Installation de PHP avec les flags USE
4.2.10.3 Problèmes fréquents
4.2.11 Installation sous Debian GNU/Linux
4.2.11.1 Utilisation de APT
4.2.11.1.1 Exemple d'installation sous Debian avec Apache 1.3
4.2.11.1.2 Arrêter et démarrer Apache une fois que PHP 4 est installé
4.2.11.2 Meilleur contrôle de la configuration
4.2.11.2.1 Obtenir la liste des paquets supplémentaires
4.2.11.2.2 Installation des modules PHP de MySQL, cURL et GD
4.2.11.2.3 Ces lignes ajoutent le support MySQL, cURL et GD au sein de PHP
4.2.11.3 Problèmes fréquents
4.2.11.3.1 Cette ligne active le support de PHP au sein d'Apache
4.3 Installation sur un système Mac OS X
4.3.1 Utilisation des paquets
4.3.2 Compilation pour les serveurs OS X
4.3.2.1 Compilation pour les serveurs OS X
4.3.3 Compilation pour les clients MacOs
4.4 Installation sur les système Windows
4.4.1 L'installeur Windows
4.4.2 Installation manuelle sous Windows
4.4.2.1 Mise à jour d'une ancienne version de PHP
4.4.3 ActiveScript
4.4.4 Installation avec les serveurs IIS/PWS
4.4.4.1 Considérations générales pour toutes les installations de PHP avec IIS
4.4.4.2 Windows NT/200x/XP et IIS 4 ou plus récent
4.4.4.3 Windows et PWS 4
4.4.4.4 Windows et PWS/IIS 3
4.4.5 Installer PHP sous Microsoft Windows avec Apache 1.3.x
4.4.5.1 Installation de PHP en tant que module Apache
4.4.5.2 Installation comme binaire CGI
4.4.6 Installation des serveurs Apache 2.0.x sur les systèmes Microsoft Windows
4.4.6.1 Installation de PHP en mode CGI
4.4.6.2 Installation de PHP en tant que module Apache
4.4.7 Serveurs Sun, iPlanet et Netscape servers sur Microsoft Windows
4.4.7.1 Configuration en CGI sur les serveurs Sun, iPlanet et Netscape
4.4.7.2 Configuration NSAPI sur les serveurs Sun, iPlanet et Netscape
4.4.7.3 Environnement CGI et modification recommandées du php.ini
4.4.7.4 Utilisation particulière pour les pages d'erreurs ou les
listages spécifiques de dossier (PHP >= 4.3.3)
4.4.7.5 Note au sujet de nsapi_virtual et des requêtes (PHP >= 4.3.3)
4.4.8 Installation pour les serveurs OmniHTTPd
4.4.9 Sambar Server on Microsoft Windows
4.4.10 Installation Xitami sur Microsoft Windows
4.4.11 Compilation des sources
4.4.11.1 Pré-requis
4.4.11.2 Compiler tout ensemble
4.4.11.3 Construction de resolv.lib
4.4.11.4 Construction de PHP en utilisant le nouveau système de construction [PHP >=5 uniquement]
4.4.11.5 Compilation de PHP en utilisant les fichiers DSW [PHP 4]
4.4.11.5.1 Configuration de MVC ++
4.4.11.5.2 Compilation
4.4.12 Installation des extensions sous Windows
4.4.12.1 Extensions PHP
4.5 Installation d'extensions PECL
4.5.1 Introduction aux installations PECL
4.5.2 Télécharger des extensions PECL
4.5.3 PECL sur Windows
4.5.4 Compilations d'extensions PECL partagées avec PEAR
4.5.5 Compilation des extensions partagées avec phpize
4.5.6 Compilation des extensions PECL statiquement dans PHP
4.6 Configuration
4.6.1 Le fichier de configuration
4.6.2 Comment modifier la configuration
4.6.2.1 Exécuter PHP comme module Apache
4.6.2.2 Modifier la configuration de PHP dans la base de registre Windows
4.6.2.3 Autres interfaces de configuration de PHP
5 Référence du langage
5.1 La syntaxe de base
5.1.1 Passer du HTML au PHP
5.1.2 Séparation des instructions
5.1.3 Commentaires
5.2 Les types
5.2.1 Introduction
5.2.2 Booléens
5.2.2.1 Syntaxe
5.2.2.2 Conversion en booléen
5.2.3 Entiers
5.2.3.1 Syntaxe
5.2.3.2 Dépassement de capacité des entiers
5.2.3.3 Conversion en entiers
5.2.3.3.1 Depuis un booléen
5.2.3.3.2 Depuis un nombre à virgule flottante
5.2.3.3.3 A partir de chaînes de caractères
5.2.3.3.4 Conversion d'autres types
5.2.4 Les nombres décimaux
5.2.4.1 Précision des nombres décimaux
5.2.4.2 Conversion d'un nombre décimal
5.2.5 Les chaînes de caractères
5.2.5.1 Syntaxe
5.2.5.1.1 Guillemets simples
5.2.5.1.2 Guillemets doubles
5.2.5.1.3 Syntaxe Heredoc
5.2.5.1.4 Traitement des variables dans les chaînes
5.2.5.1.4.1 Syntaxe simple
5.2.5.1.4.2 Syntaxe complexe
5.2.5.1.5 Accès et modification des caractères d'une chaîne
5.2.5.2 Fonctions et opérateurs pratiques
5.2.5.3 Conversion en une chaîne de caractères
5.2.5.4 Conversion de chaînes de caractères
5.2.6 Les tableaux
5.2.6.1 Syntaxe
5.2.6.1.1 Créer un tableau array
5.2.6.1.2 La syntaxe à crochets
5.2.6.2 Fonctions pratiques
5.2.6.3 A faire et à ne pas faire avec les tableaux
5.2.6.3.1 Pourquoi est-ce que $foo[bar] est invalide ?
5.2.6.4 Conversion en tableau
5.2.6.5 Comparaisons de tableaux
5.2.6.6 Exemples
5.2.6.6.1 Collection
5.2.6.6.2 Collection
5.2.7 Les objets
5.2.7.1 Initialisation d'un objet
5.2.7.2 Conversion en objet
5.2.8 Ressources
5.2.8.1 Conversion en ressource
5.2.8.2 Libérer des ressources
5.2.9 La valeur NULL
5.2.9.1 Syntaxe
5.2.10 Pseudo-types utilisés dans cette documentation
5.2.10.1 mixed
5.2.10.2 number
5.2.10.3 callback
5.2.11 Définition du type
5.2.11.1 Transtypage
5.3 Les variables
5.3.1 Essentiel
5.3.2 Variables pré-définies
5.3.2.1 Tableaux superglobaux de PHP
5.3.3 Portée des variables
5.3.3.1 Le mot clé global
5.3.3.2 Utilisation des variables static
5.3.3.3 Les références avec les variables global et static
5.3.4 Les variables dynamiques
5.3.5 Variables externes à PHP
5.3.5.1 Formulaires HTML (GET et POST)
5.3.5.1.1 Nom de variables IMAGE de type SUBMIT
5.3.5.2 Cookies HTTP
5.3.5.3 Cas des points dans les noms de variables
5.3.5.4 Détermination du type des variables
5.4 Les constantes
5.4.1 Syntaxe
5.4.2 Constantes magiques
5.5 Les expressions
5.6 Les opérateurs
5.6.1 La précédence des opérateurs
5.6.2 Les opérateurs arithmétiques
5.6.3 Les opérateurs d'assignation
5.6.4 Opérateurs sur les bits
5.6.5 Opérateurs de comparaison
5.6.5.1 L'opérateur ternaire
5.6.6 Opérateur de contrôle d'erreur
5.6.7 Opérateur d'exécution
5.6.8 Opérateurs d'incrémentation et décrémentation
5.6.9 Les opérateurs logiques
5.6.10 Opérateurs de chaînes
5.6.11 Opérateurs de tableaux
5.6.12 Opérateur de type
5.7 Les structures de contrôle
5.7.1 if
5.7.2 else
5.7.3 elseif
5.7.4 Syntaxe alternative
5.7.5 while
5.7.6 do-while
5.7.7 for
5.7.8 foreach
5.7.9 break
5.7.10 continue
5.7.11 switch
5.7.12 declare
5.7.12.1 Ticks
5.7.13 return
5.7.14 require
5.7.15 include
5.7.16 require_once
5.7.17 include_once
5.8 Les fonctions
5.8.1 Les fonctions
5.8.2 Les arguments de fonction
5.8.2.1 Passage d'arguments par référence
5.8.2.2 Valeur par défaut des arguments
5.8.2.3 Nombre d'arguments variable
5.8.3 Les valeurs de retour
5.8.4 Fonctions variables
5.8.5 Fonctions internes
5.9 Les classes et les objets (PHP 4)
5.9.1 Les classes : class
5.9.2 extends : héritage
5.9.3 Constructeur
5.9.4 Opérateur de contexte de classe ( :: )
5.9.5 parent
5.9.6 Sauvegarde d'objets - cas des sessions
5.9.7 Les fonctions magiques __sleep et __wakeup
5.9.8 Références dans un constructeur
5.9.9 Comparer des objets
5.10 Les classes et les objets (PHP 5)
5.10.1 Introduction
5.10.2 Syntaxe de base
5.10.2.1 class
5.10.2.2 Le mot clé new
5.10.2.3 Le mot clé extends
5.10.3 Auto-chargement de classes
5.10.4 Constructeurs et destructeurs
5.10.4.1 Constructeurs
5.10.4.2 Destructeurs
5.10.5 Visibilité
5.10.5.1 Visibilité des membres
5.10.5.2 Visibilité des méthodes
5.10.6 L'opérateur de résolution de portée (::)
5.10.7 Statique
5.10.8 Constantes de classe
5.10.9 Abstraction de classes
5.10.10 Interfaces
5.10.11 Surcharge
5.10.11.1 Surcharge de membre
5.10.11.2 Surcharge de méthode
5.10.12 Parcours d'objets
5.10.13 Masques
5.10.13.1 Usine
5.10.13.2 Singleton
5.10.14 Méthodes magiques
5.10.14.1 __sleep et __wakeup
5.10.14.2 __toString
5.10.14.3 __set_state
5.10.15 Mot clé "final"
5.10.16 Clonage d'objets
5.10.17 Comparaison d'objets
5.10.18 Réflexion
5.10.18.1 Introduction
5.10.18.2 ReflectionException
5.10.18.3 ReflectionFunction
5.10.18.4 ReflectionParameter
5.10.18.5 ReflectionClass
5.10.18.6 ReflectionMethod
5.10.18.7 ReflectionProperty
5.10.18.8 ReflectionExtension
5.10.18.9 Extension des classes de réflexion
5.10.19 Typage objet
5.11 Exceptions
5.11.1 Exceptions étendues
5.12 Les références
5.12.1 Qu'est ce qu'une référence?
5.12.2 Que font les références ?
5.12.3 Ce que les références ne sont pas
5.12.4 Passage par référence
5.12.5 Retourner des références
5.12.6 Détruire une référence
5.12.7 Repérer une référence
5.12.7.1 Références globales
5.12.7.2 $this
6 Sécurité
6.1 Introduction
6.2 Considérations générales
6.3 Binaires CGI
6.3.1 Faiblesses connues
6.3.2 Cas 1 : Tous les fichiers sont publics
6.3.3 Cas 2 : Utilisation de la directive de compilation --enable-force-cgi-redirect
6.3.4 Cas 3 : Utilisation du "doc_root" ou du "user_dir"
6.3.5 Cas 4 : L'exécutable PHP à l'extérieur de l'arborescence du serveur
6.4 Installé en tant que module Apache
6.5 Sécurité des fichiers
6.6 Sécurité des bases de données
6.6.1 Schéma de base de données
6.6.2 Connexions au serveur de base de données
6.6.3 Modèle de stockage avec chiffrement
6.6.4 Injection SQL
6.6.4.1 Techniques de contournement
6.7 Rapport d'erreurs
6.8 Utilisation des variables super-globales
6.9 Données transmises par les internautes
6.10 Guillemets magiques
6.10.1 Qu'est-ce que les guillemets magiques?
6.10.2 Pourquoi utiliser les guillemets magiques?
6.10.3 Pourquoi ne pas utiliser les guillemets magiques?
6.10.4 Désactiver les guillemets magiques
6.11 Masquer PHP
6.12 Etre à jour
7 Caractéristiques
7.1 Identification HTTP avec PHP
7.2 Cookies
7.3 Sessions
7.4 Utiliser les XForms
7.5 Gestion des chargements de fichier
7.5.1 Chargements de fichiers par méthode POST
7.5.2 Explication sur les messages d'erreurs de chargement de fichiers
7.5.3 Erreurs classiques
7.5.4 Télécharger plusieurs fichiers simultanément
7.5.5 Chargement par méthode PUT
7.6 Utilisation des fichiers à distance
7.7 Gestion des connexions
7.8 Connexions persistantes aux bases de données
7.9 Safe mode
7.9.1 Sécurité et Safe Mode
7.9.1.1 safe_mode
7.9.1.2 safe_mode_gid
7.9.1.3 safe_mode_include_dir
7.9.1.4 safe_mode_exec_dir
7.9.1.5 safe_mode_allowed_env_vars
7.9.1.6 safe_mode_protected_env_vars
7.9.1.7 open_basedir
7.9.1.8 disable_functions
7.9.1.9 disable_classes
7.9.2 Fonctions désactivées par le Safe Mode
7.10 Utiliser PHP en ligne de commande
8 Référence des fonctions
8.1 Fonctions Apache
8.1.1 Introduction
8.1.2 Installation
8.1.3 Configuration à l'exécution
8.1.3.1 engine
8.1.3.2 child_terminate
8.1.3.3 last_modified
8.1.3.4 xbithack
8.1.4 Types de ressources
8.1.5 Constantes pré-définies
8.1.6 apache_child_terminate
8.1.7 apache_get_modules
8.1.8 apache_get_version
8.1.9 apache_getenv
8.1.10 apache_lookup_uri
8.1.11 apache_note
8.1.12 apache_request_headers
8.1.13 apache_reset_timeout
8.1.14 apache_response_headers
8.1.15 apache_setenv
8.1.16 ascii2ebcdic
8.1.17 ebcdic2ascii
8.1.18 getallheaders
8.1.19 virtual
8.2 Débogueur avancé pour PHP
8.2.1 Introduction
8.2.2 Installation
8.2.3 Compilation sous un environnement Win32
8.2.4 Configuration à l'exécution
8.2.4.1 apd.dumpdir
8.2.4.2 apd.statement_tracing
8.2.5 Types de ressources
8.2.6 Constantes pré-définies
8.2.7 Comment utiliser APD dans vos scripts ?
8.2.8 Informations de contact
8.2.9 apd_breakpoint
8.2.10 apd_callstack
8.2.11 apd_clunk
8.2.12 apd_continue
8.2.13 apd_croak
8.2.14 apd_dump_function_table
8.2.15 apd_dump_persistent_resources
8.2.16 apd_dump_regular_resources
8.2.17 apd_echo
8.2.18 apd_get_active_symbols
8.2.19 apd_set_pprof_trace
8.2.20 apd_set_session_trace
8.2.21 apd_set_session
8.2.22 apd_set_socket_session_trace
8.2.23 override_function
8.2.24 rename_function
8.3 Tableaux
8.3.1 Introduction
8.3.2 Pré-requis
8.3.3 Installation
8.3.4 Configuration à l'exécution
8.3.5 Types de ressources
8.3.6 Constantes pré-définies
8.3.7 Voir aussi
8.3.8 array_change_key_case
8.3.9 array_chunk
8.3.10 array_combine
8.3.11 array_count_values
8.3.12 array_diff_assoc
8.3.13 array_diff_key
8.3.14 array_diff_uassoc
8.3.15 array_diff_ukey
8.3.16 array_diff
8.3.17 array_fill
8.3.18 array_filter
8.3.19 array_flip
8.3.20 array_intersect_assoc
8.3.21 array_intersect_key
8.3.22 array_intersect_uassoc
8.3.23 array_intersect_ukey
8.3.24 array_intersect
8.3.25 array_key_exists
8.3.26 array_keys
8.3.27 array_map
8.3.28 array_merge_recursive
8.3.29 array_merge
8.3.30 array_multisort
8.3.31 array_pad
8.3.32 array_pop
8.3.33 array_product
8.3.34 array_push
8.3.35 array_rand
8.3.36 array_reduce
8.3.37 array_reverse
8.3.38 array_search
8.3.39 array_shift
8.3.40 array_slice
8.3.41 array_splice
8.3.42 array_sum
8.3.43 array_udiff_assoc
8.3.44 array_udiff_uassoc
8.3.45 array_udiff
8.3.46 array_uintersect_assoc
8.3.47 array_uintersect_uassoc
8.3.48 array_uintersect
8.3.49 array_unique
8.3.50 array_unshift
8.3.51 array_values
8.3.52 array_walk_recursive
8.3.53 array_walk
8.3.54 array
8.3.55 arsort
8.3.56 asort
8.3.57 compact
8.3.58 count
8.3.59 current
8.3.60 each
8.3.61 end
8.3.62 extract
8.3.63 in_array
8.3.64 key
8.3.65 krsort
8.3.66 ksort
8.3.67 list
8.3.68 natcasesort
8.3.69 natsort
8.3.70 next
8.3.71 pos
8.3.72 prev
8.3.73 range
8.3.74 reset
8.3.75 rsort
8.3.76 shuffle
8.3.77 sizeof
8.3.78 sort
8.3.79 uasort
8.3.80 uksort
8.3.81 usort
8.4 Aspell [Obs.]
8.4.1 Introduction
8.4.2 Pré-requis
8.4.3 Installation
8.4.3.1 aspell.configure
8.4.4 Voir aussi
8.4.5 aspell_check_raw
8.4.6 aspell_check
8.4.7 aspell_new
8.4.8 aspell_suggest
8.5 Nombres de grande taille BCMath
8.5.1 Introduction
8.5.2 Pré-requis
8.5.3 Installation
8.5.4 Configuration à l'exécution
8.5.4.1 bcmath.scale
8.5.5 Types de ressources
8.5.6 Constantes pré-définies
8.5.7 bcadd
8.5.8 bccomp
8.5.9 bcdiv
8.5.10 bcmod
8.5.11 bcmul
8.5.12 bcpow
8.5.13 bcpowmod
8.5.14 bcscale
8.5.15 bcsqrt
8.5.16 bcsub
8.6 Compilateur bytecode pour PHP
8.6.1 Introduction
8.6.2 Installation
8.6.3 Contact
8.6.4 bcompiler_load_exe
8.6.5 bcompiler_load
8.6.6 bcompiler_parse_class
8.6.7 bcompiler_read
8.6.8 bcompiler_write_class
8.6.9 bcompiler_write_constant
8.6.10 bcompiler_write_exe_footer
8.6.11 bcompiler_write_file
8.6.12 bcompiler_write_footer
8.6.13 bcompiler_write_function
8.6.14 bcompiler_write_functions_from_file
8.6.15 bcompiler_write_header
8.7 Compression Bzip2
8.7.1 Introduction
8.7.2 Pré-requis
8.7.3 Installation
8.7.4 Configuration à l'exécution
8.7.5 Types de ressources
8.7.6 Constantes pré-définies
8.7.7 Exemples
8.7.8 bzclose
8.7.9 bzcompress
8.7.10 bzdecompress
8.7.11 bzerrno
8.7.12 bzerror
8.7.13 bzerrstr
8.7.14 bzflush
8.7.15 bzopen
8.7.16 bzread
8.7.17 bzwrite
8.8 Calendrier
8.8.1 Introduction
8.8.2 Installation
8.8.3 Configuration à l'exécution
8.8.4 Types de ressources
8.8.5 Constantes pré-définies
8.8.6 cal_days_in_month
8.8.7 cal_from_jd
8.8.8 cal_info
8.8.9 cal_to_jd
8.8.10 easter_date
8.8.11 easter_days
8.8.12 FrenchToJD
8.8.13 GregorianToJD
8.8.14 JDDayOfWeek
8.8.15 JDMonthName
8.8.16 JDToFrench
8.8.17 JDToGregorian
8.8.18 jdtojewish
8.8.19 JDToJulian
8.8.20 jdtounix
8.8.21 JewishToJD
8.8.22 JulianToJD
8.8.23 unixtojd
8.9 Paiement CCVS [déconseillé]
8.9.1 Introduction
8.9.2 Installation
8.9.2.1 ccvs.configure
8.9.3 Voir aussi
8.9.4 ccvs_add
8.9.5 ccvs_auth
8.9.6 ccvs_command
8.9.7 ccvs_count
8.9.8 ccvs_delete
8.9.9 ccvs_done
8.9.10 ccvs_init
8.9.11 ccvs_lookup
8.9.12 ccvs_new
8.9.13 ccvs_report
8.9.14 ccvs_return
8.9.15 ccvs_reverse
8.9.16 ccvs_sale
8.9.17 ccvs_status
8.9.18 ccvs_textvalue
8.9.19 ccvs_void
8.10 Fonctions Classkit
8.10.1 Introduction
8.10.2 Installation
8.10.3 Configuration à l'exécution
8.10.4 Types de ressources
8.10.5 Constantes pré-définies
8.10.6 classkit_import
8.10.7 classkit_method_add
8.10.8 classkit_method_copy
8.10.9 classkit_method_redefine
8.10.10 classkit_method_remove
8.10.11 classkit_method_rename
8.11 Classes et Objets
8.11.1 Introduction
8.11.2 Pré-requis
8.11.3 Installation
8.11.4 Configuration à l'exécution
8.11.5 Types de ressources
8.11.6 Constantes pré-définies
8.11.7 Exemples
8.11.8 call_user_method_array
8.11.9 call_user_method
8.11.10 class_exists
8.11.11 get_class_methods
8.11.12 get_class_vars
8.11.13 get_class
8.11.14 get_declared_classes
8.11.15 get_declared_interfaces
8.11.16 get_object_vars
8.11.17 get_parent_class
8.11.18 interface_exists
8.11.19 is_a
8.11.20 is_subclass_of
8.11.21 method_exists
8.11.22 property_exists
8.12 COM et .Net (Windows)
8.12.1 Introduction
8.12.2 Pré-requis
8.12.3 Installation
8.12.4 For Each
8.12.5 Tableaux et propriétées à la façon des tableaux de COM
8.12.6 Exceptions (PHP 5)
8.12.7 Configuration à l'exécution
8.12.7.1 com.allow_dcom
8.12.7.2 com.autoregister_typelib
8.12.7.3 com.autoregister_verbose
8.12.7.4 com.autoregister_casesensitive
8.12.7.5 com.code_page
8.12.7.6 com.typelib_file
8.12.8 Constantes pré-définies
8.12.9 Voir aussi
8.12.10 COM
8.12.10.1 Description
8.12.10.2 Méthodes
8.12.10.3 Méthodes surchargés
8.12.10.4 Les pseudos méthodes
8.12.10.5 Les pseudos méthodes pour itération
8.12.10.6 COM examples
8.12.10.6.1 Exemple COM (1)
8.12.10.6.2 Exemple COM (2)
8.12.11 DOTNET
8.12.11.1 Description
8.12.11.2 Méthodes
8.12.11.2.1 Exemple DOTNET
8.12.12 VARIANT
8.12.12.1 Description
8.12.12.2 Methodes
8.12.12.2.1 Exemple d'une classe VARIANT, comme utilisé en PHP 4.x
8.12.12.2.2 Exemple d'une classe VARIANT, comme utilisé en PHP 5
8.12.13 com_addref
8.12.14 com_create_guid
8.12.15 com_event_sink
8.12.16 com_get_active_object
8.12.17 com_get
8.12.18 com_invoke
8.12.19 com_isenum
8.12.20 com_load_typelib
8.12.21 com_load
8.12.22 com_message_pump
8.12.23 com_print_typeinfo
8.12.24 com_propget
8.12.25 com_propput
8.12.26 com_propset
8.12.27 com_release
8.12.28 com_set
8.12.29 variant_abs
8.12.30 variant_add
8.12.31 variant_and
8.12.32 variant_cast
8.12.33 variant_cat
8.12.34 variant_cmp
8.12.35 variant_date_from_timestamp
8.12.36 variant_date_to_timestamp
8.12.37 variant_div
8.12.38 variant_eqv
8.12.39 variant_fix
8.12.40 variant_get_type
8.12.41 variant_idiv
8.12.42 variant_imp
8.12.43 variant_int
8.12.44 variant_mod
8.12.45 variant_mul
8.12.46 variant_neg
8.12.47 variant_not
8.12.48 variant_or
8.12.49 variant_pow
8.12.50 variant_round
8.12.51 variant_set_type
8.12.52 variant_set
8.12.53 variant_sub
8.12.54 variant_xor
8.13 Fonctions ClibPDF
8.13.1 Introduction
8.13.2 Pré-requis
8.13.3 Installation
8.13.4 Configuration à l'exécution
8.13.5 Constantes pré-définies
8.13.6 Exemples
8.13.7 Voir aussi
8.13.8 cpdf_add_annotation
8.13.9 cpdf_add_outline
8.13.10 cpdf_arc
8.13.11 cpdf_begin_text
8.13.12 cpdf_circle
8.13.13 cpdf_clip
8.13.14 cpdf_close
8.13.15 cpdf_closepath_fill_stroke
8.13.16 cpdf_closepath_stroke
8.13.17 cpdf_closepath
8.13.18 cpdf_continue_text
8.13.19 cpdf_curveto
8.13.20 cpdf_end_text
8.13.21 cpdf_fill_stroke
8.13.22 cpdf_fill
8.13.23 cpdf_finalize_page
8.13.24 cpdf_finalize
8.13.25 cpdf_global_set_document_limits
8.13.26 cpdf_import_jpeg
8.13.27 cpdf_lineto
8.13.28 cpdf_moveto
8.13.29 cpdf_newpath
8.13.30 cpdf_open
8.13.31 cpdf_output_buffer
8.13.32 cpdf_page_init
8.13.33 cpdf_place_inline_image
8.13.34 cpdf_rect
8.13.35 cpdf_restore
8.13.36 cpdf_rlineto
8.13.37 cpdf_rmoveto
8.13.38 cpdf_rotate_text
8.13.39 cpdf_rotate
8.13.40 cpdf_save_to_file
8.13.41 cpdf_save
8.13.42 cpdf_scale
8.13.43 cpdf_set_action_url
8.13.44 cpdf_set_char_spacing
8.13.45 cpdf_set_creator
8.13.46 cpdf_set_current_page
8.13.47 cpdf_set_font_directories
8.13.48 cpdf_set_font_map_file
8.13.49 cpdf_set_font
8.13.50 cpdf_set_horiz_scaling
8.13.51 cpdf_set_keywords
8.13.52 cpdf_set_leading
8.13.53 cpdf_set_page_animation
8.13.54 cpdf_set_subject
8.13.55 cpdf_set_text_matrix
8.13.56 cpdf_set_text_pos
8.13.57 cpdf_set_text_rendering
8.13.58 cpdf_set_text_rise
8.13.59 cpdf_set_title
8.13.60 cpdf_set_viewer_preferences
8.13.61 cpdf_set_word_spacing
8.13.62 cpdf_setdash
8.13.63 cpdf_setflat
8.13.64 cpdf_setgray_fill
8.13.65 cpdf_setgray_stroke
8.13.66 cpdf_setgray
8.13.67 cpdf_setlinecap
8.13.68 cpdf_setlinejoin
8.13.69 cpdf_setlinewidth
8.13.70 cpdf_setmiterlimit
8.13.71 cpdf_setrgbcolor_fill
8.13.72 cpdf_setrgbcolor_stroke
8.13.73 cpdf_setrgbcolor
8.13.74 cpdf_show_xy
8.13.75 cpdf_show
8.13.76 cpdf_stringwidth
8.13.77 cpdf_stroke
8.13.78 cpdf_text
8.13.79 cpdf_translate
8.14 Crack
8.14.1 Introduction
8.14.2 Pré-requis
8.14.3 Installation
8.14.4 Configuration à l'exécution
8.14.5 Types de ressources
8.14.6 Constantes pré-définies
8.14.7 Exemples
8.14.8 crack_check
8.14.9 crack_closedict
8.14.10 crack_getlastmessage
8.14.11 crack_opendict
8.15 Caractères
8.15.1 Introduction
8.15.2 Pré-requis
8.15.3 Installation
8.15.4 Configuration à l'exécution
8.15.5 Types de ressources
8.15.6 Constantes pré-définies
8.15.7 ctype_alnum
8.15.8 ctype_alpha
8.15.9 ctype_cntrl
8.15.10 ctype_digit
8.15.11 ctype_graph
8.15.12 ctype_lower
8.15.13 ctype_print
8.15.14 ctype_punct
8.15.15 ctype_space
8.15.16 ctype_upper
8.15.17 ctype_xdigit
8.16 CURL
8.16.1 Introduction
8.16.2 Pré-requis
8.16.3 Installation
8.16.4 Constantes pré-définies
8.16.5 Exemples
8.16.6 curl_close
8.16.7 curl_copy_handle
8.16.8 curl_errno
8.16.9 curl_error
8.16.10 curl_exec
8.16.11 curl_getinfo
8.16.12 curl_init
8.16.13 curl_multi_add_handle
8.16.14 curl_multi_close
8.16.15 curl_multi_exec
8.16.16 curl_multi_getcontent
8.16.17 curl_multi_info_read
8.16.18 curl_multi_init
8.16.19 curl_multi_remove_handle
8.16.20 curl_multi_select
8.16.21 curl_setopt
8.16.22 curl_version
8.17 Paiement Cybercash
8.17.1 Installation
8.17.2 cybercash_base64_decode
8.17.3 cybercash_base64_encode
8.17.4 cybercash_decr
8.17.5 cybercash_encr
8.18 Fonctions Crédit Mutuel CyberMUT
8.18.1 Introduction
8.18.2 Pré-requis
8.18.3 cybermut_creerformulairecm
8.18.4 cybermut_creerreponsecm
8.18.5 cybermut_testmac
8.19 Cyrus IMAP
8.19.1 Introduction
8.19.2 Installation
8.19.3 Constantes pré-définies
8.19.4 cyrus_authenticate
8.19.5 cyrus_bind
8.19.6 cyrus_close
8.19.7 cyrus_connect
8.19.8 cyrus_query
8.19.9 cyrus_unbind
8.20 Dates et heures
8.20.1 Introduction
8.20.2 Pré-requis
8.20.3 Installation
8.20.4 Configuration à l'exécution
8.20.5 Configuration à l'exécution
8.20.5.1 date.default_latitude
8.20.5.2 date.default_longitude
8.20.5.3 date.sunrise_zenith
8.20.5.4 date.sunset_zenith
8.20.5.5 date.timezone
8.20.6 Types de ressources
8.20.7 Constantes pré-définies
8.20.8 checkdate
8.20.9 date_default_timezone_get
8.20.10 date_default_timezone_set
8.20.11 date_sunrise
8.20.12 date_sunset
8.20.13 date
8.20.14 getdate
8.20.15 gettimeofday
8.20.16 gmdate
8.20.17 gmmktime
8.20.18 gmstrftime
8.20.19 idate
8.20.20 localtime
8.20.21 microtime
8.20.22 mktime
8.20.23 strftime
8.20.24 strptime
8.20.25 strtotime
8.20.26 time
8.21 DBA
8.21.1 Introduction
8.21.2 Pré-requis
8.21.3 Installation
8.21.4 Configuration à l'exécution
8.21.5 Types de ressources
8.21.6 Constantes pré-définies
8.21.7 Exemples
8.21.8 dba_close
8.21.9 dba_delete
8.21.10 dba_exists
8.21.11 dba_fetch
8.21.12 dba_firstkey
8.21.13 dba_handlers
8.21.14 dba_insert
8.21.15 dba_key_split
8.21.16 dba_list
8.21.17 dba_nextkey
8.21.18 dba_open
8.21.19 dba_optimize
8.21.20 dba_popen
8.21.21 dba_replace
8.21.22 dba_sync
8.22 dBase
8.22.1 Introduction
8.22.2 Installation
8.22.3 Configuration à l'exécution
8.22.4 Types de ressources
8.22.5 Exemples
8.22.6 Constantes pré-définies
8.22.7 dbase_add_record
8.22.8 dbase_close
8.22.9 dbase_create
8.22.10 dbase_delete_record
8.22.11 dbase_get_header_info
8.22.12 dbase_get_record_with_names
8.22.13 dbase_get_record
8.22.14 dbase_numfields
8.22.15 dbase_numrecords
8.22.16 dbase_open
8.22.17 dbase_pack
8.22.18 dbase_replace_record
8.23 DBM (Obsolète)
8.23.1 Introduction
8.23.2 Pré-requis
8.23.3 Installation
8.23.4 Configuration à l'exécution
8.23.5 Types de ressources
8.23.6 Constantes pré-définies
8.23.7 Exemples
8.23.8 dblist
8.23.9 dbmclose
8.23.10 dbmdelete
8.23.11 dbmexists
8.23.12 dbmfetch
8.23.13 dbmfirstkey
8.23.14 dbminsert
8.23.15 dbmnextkey
8.23.16 dbmopen
8.23.17 dbmreplace
8.24 Fonctions DB++
8.24.1 Introduction
8.24.2 Pré-requis
8.24.3 Installation
8.24.4 Configuration à l'exécution
8.24.5 Types de ressources
8.24.5.1 dbplus_relation
8.24.6 Constantes pré-définies
8.24.6.1 Codes d'erreurs de DB++
8.24.6.1.1 constant.dbplus-err-noerr
8.24.6.1.2 constant.dbplus-err-duplicate
8.24.6.1.3 constant.dbplus-err-eoscan
8.24.6.1.4 constant.dbplus-err-empty
8.24.6.1.5 constant.dbplus-err-close
8.24.6.1.6 constant.dbplus-err-wlocked
8.24.6.1.7 constant.dbplus-err-locked
8.24.6.1.8 constant.dbplus-err-nolock
8.24.6.1.9 constant.dbplus-err-read
8.24.6.1.10 constant.dbplus-err-write
8.24.6.1.11 constant.dbplus-err-create
8.24.6.1.12 constant.dbplus-err-lseek
8.24.6.1.13 constant.dbplus-err-length
8.24.6.1.14 constant.dbplus-err-open
8.24.6.1.15 constant.dbplus-err-wopen
8.24.6.1.16 constant.dbplus-err-magic
8.24.6.1.17 constant.dbplus-err-version
8.24.6.1.18 constant.dbplus-err-pgsize
8.24.6.1.19 constant.dbplus-err-crc
8.24.6.1.20 constant.dbplus-err-pipe
8.24.6.1.21 constant.dbplus-err-nidx
8.24.6.1.22 constant.dbplus-err-malloc
8.24.6.1.23 constant.dbplus-err-nusers
8.24.6.1.24 constant.dbplus-err-preexit
8.24.6.1.25 constant.dbplus-err-ontrap
8.24.6.1.26 constant.dbplus-err-preproc
8.24.6.1.27 constant.dbplus-err-dbparse
8.24.6.1.28 constant.dbplus-err-dbrunerr
8.24.6.1.29 constant.dbplus-err-dbpreexit
8.24.6.1.30 constant.dbplus-err-wait
8.24.6.1.31 constant.dbplus-err-corrupt-tuple
8.24.6.1.32 constant.dbplus-err-warning0
8.24.6.1.33 constant.dbplus-err-panic
8.24.6.1.34 constant.dbplus-err-fifo
8.24.6.1.35 constant.dbplus-err-perm
8.24.6.1.36 constant.dbplus-err-tcl
8.24.6.1.37 constant.dbplus-err-restricted
8.24.6.1.38 constant.dbplus-err-user
8.24.6.1.39 constant.dbplus-err-unknown
8.24.7 dbplus_add
8.24.8 dbplus_aql
8.24.9 dbplus_chdir
8.24.10 dbplus_close
8.24.11 dbplus_curr
8.24.12 dbplus_errcode
8.24.13 dbplus_errno
8.24.14 dbplus_find
8.24.15 dbplus_first
8.24.16 dbplus_flush
8.24.17 dbplus_freealllocks
8.24.18 dbplus_freelock
8.24.19 dbplus_freerlocks
8.24.20 dbplus_getlock
8.24.21 dbplus_getunique
8.24.22 dbplus_info
8.24.23 dbplus_last
8.24.24 dbplus_lockrel
8.24.25 dbplus_next
8.24.26 dbplus_open
8.24.27 dbplus_prev
8.24.28 dbplus_rchperm
8.24.29 dbplus_rcreate
8.24.30 dbplus_rcrtexact
8.24.31 dbplus_rcrtlike
8.24.32 dbplus_resolve
8.24.33 dbplus_restorepos
8.24.34 dbplus_rkeys
8.24.35 dbplus_ropen
8.24.36 dbplus_rquery
8.24.37 dbplus_rrename
8.24.38 dbplus_rsecindex
8.24.39 dbplus_runlink
8.24.40 dbplus_rzap
8.24.41 dbplus_savepos
8.24.42 dbplus_setindex
8.24.43 dbplus_setindexbynumber
8.24.44 dbplus_sql
8.24.45 dbplus_tcl
8.24.46 dbplus_tremove
8.24.47 dbplus_undo
8.24.48 dbplus_undoprepare
8.24.49 dbplus_unlockrel
8.24.50 dbplus_unselect
8.24.51 dbplus_update
8.24.52 dbplus_xlockrel
8.24.53 dbplus_xunlockrel
8.25 Fonctions dbx
8.25.1 Introduction
8.25.2 Pré-requis
8.25.3 Installation
8.25.4 Configuration à l'exécution
8.25.4.1 dbx.colnames_case
8.25.5 Types de ressources
8.25.6 Constantes pré-définies
8.25.7 dbx_close
8.25.8 dbx_compare
8.25.9 dbx_connect
8.25.10 dbx_error
8.25.11 dbx_escape_string
8.25.12 dbx_fetch_row
8.25.13 dbx_query
8.25.14 dbx_sort
8.26 Direct IO
8.26.1 Introduction
8.26.2 Pré-requis
8.26.3 Installation
8.26.4 Constantes pré-définies
8.26.5 Configuration à l'exécution
8.26.6 Types de ressources
8.26.7 dio_close
8.26.8 dio_fcntl
8.26.9 dio_open
8.26.10 dio_read
8.26.11 dio_seek
8.26.12 dio_stat
8.26.13 dio_tcsetattr
8.26.14 dio_truncate
8.26.15 dio_write
8.27 Accès aux dossiers
8.27.1 Introduction
8.27.2 Pré-requis
8.27.3 Installation
8.27.4 Configuration à l'exécution
8.27.5 Types de ressources
8.27.6 Constantes pré-définies
8.27.7 Voir aussi
8.27.8 chdir
8.27.9 chroot
8.27.10 dir
8.27.11 closedir
8.27.12 getcwd
8.27.13 opendir
8.27.14 readdir
8.27.15 rewinddir
8.27.16 scandir
8.28 Fonctions DOM
8.28.1 Introduction
8.28.2 Installation
8.28.3 Classes pré-définies
8.28.3.1 DOMAttr
8.28.3.1.1 Constructeur
8.28.3.1.2 Méthodes
8.28.3.1.3 Propriétés
8.28.3.2 DOMCharacterData
8.28.3.2.1 Méthodes
8.28.3.2.2 Propriétés
8.28.3.3 DOMComment
8.28.3.3.1 Constructeur
8.28.3.4 DOMDocument
8.28.3.4.1 Constructeur
8.28.3.4.2 Méthodes
8.28.3.4.3 Propriétés
8.28.3.5 DOMDocumentType
8.28.3.5.1 Propriétés
8.28.3.6 DOMElement
8.28.3.6.1 Constructeur
8.28.3.6.2 Méthodes
8.28.3.6.3 Propriétés
8.28.3.7 DOMEntity
8.28.3.7.1 Propriétés
8.28.3.8 DOMEntityReference
8.28.3.8.1 Constructeur
8.28.3.9 DOMException
8.28.3.9.1 Propriétés
8.28.3.10 DOMImplementation
8.28.3.10.1 Constructeur
8.28.3.10.2 Méthodes
8.28.3.11 DOMNode
8.28.3.11.1 Méthodes
8.28.3.11.2 Propriétés
8.28.3.12 DOMNodeList
8.28.3.12.1 Méthodes
8.28.3.12.2 Propriétés
8.28.3.13 DOMNotation
8.28.3.13.1 Propriétés
8.28.3.14 DOMProcessingInstruction
8.28.3.14.1 Constructeur
8.28.3.14.2 Propriétés
8.28.3.15 DOMText
8.28.3.15.1 Constructeur
8.28.3.15.2 Méthodes
8.28.3.15.3 Propriétés
8.28.3.16 DOMXPath
8.28.3.16.1 Constructeur
8.28.3.16.2 Méthodes
8.28.3.16.3 Propriétés
8.28.4 Exemples
8.28.5 Constantes pré-définies
8.28.6 DOMAttr->__construct()
8.28.7 DOMAttr->isId()
8.28.8 DOMCharacterData->appendData()
8.28.9 DOMCharacterData->deleteData()
8.28.10 DOMCharacterData->insertData()
8.28.11 DOMCharacterData->replaceData()
8.28.12 DOMCharacterData->substringData()
8.28.13 DOMComment->__construct()
8.28.14 DOMDocument->__construct()
8.28.15 DOMDocument->createAttribute()
8.28.16 DOMDocument->createAttributeNS()
8.28.17 DOMDocument->createCDATASection()
8.28.18 DOMDocument->createComment()
8.28.19 DOMDocument->createDocumentFragment()
8.28.20 DOMDocument->createElement()
8.28.21 DOMDocument->createElementNS()
8.28.22 DOMDocument->createEntityReference()
8.28.23 DOMDocument->createProcessingInstruction()
8.28.24 DOMDocument->createTextNode()
8.28.25 DOMDocument->getElementById()
8.28.26 DOMDocument->getElementsByTagName()
8.28.27 DOMDocument->getElementsByTagNameNS()
8.28.28 DOMDocument->importNode()
8.28.29 DOMDocument->load()
8.28.30 DOMDocument->loadHTML()
8.28.31 DOMDocument->loadHTMLFile()
8.28.32 DOMDocument->loadXML()
8.28.33 DOMDocument->normalize()
8.28.34 DOMDocument->relaxNGValidate()
8.28.35 DOMDocument->relaxNGValidateSource()
8.28.36 DOMDocument->save()
8.28.37 DOMDocument->saveHTML()
8.28.38 DOMDocument->saveHTMLFile()
8.28.39 DOMDocument->saveXML()
8.28.40 DOMDocument->schemaValidate()
8.28.41 DOMDocument->schemaValidateSource()
8.28.42 DOMDocument->validate()
8.28.43 DOMDocument->xinclude()
8.28.44 DOMElement->__construct()
8.28.45 DOMElement->getAttribute()
8.28.46 DOMElement->getAttributeNode()
8.28.47 DOMElement->getAttributeNodeNS()
8.28.48 DOMElement->getAttributeNS()
8.28.49 DOMElement->getElementsByTagName()
8.28.50 DOMElement->getElementsByTagNameNS()
8.28.51 DOMElement->hasAttribute()
8.28.52 DOMElement->hasAttributeNS()
8.28.53 DOMElement->removeAttribute()
8.28.54 DOMElement->removeAttributeNode()
8.28.55 DOMElement->removeAttributeNS()
8.28.56 DOMElement->setAttribute()
8.28.57 DOMElement->setAttributeNode()
8.28.58 DOMElement->setAttributeNodeNS()
8.28.59 DOMElement->setAttributeNS()
8.28.60 DOMEntityReference->__construct()
8.28.61 DOMImplementation->__construct()
8.28.62 DOMImplementation->createDocument()
8.28.63 DOMImplementation->createDocumentType()
8.28.64 DOMImplementation->hasFeature()
8.28.65 DOMNamedNodeMap->getNamedItem()
8.28.66 DOMNamedNodeMap->getNamedItemNS()
8.28.67 DOMNamedNodeMap->item()
8.28.68 DOMNode->appendChild()
8.28.69 DOMNode->cloneNode()
8.28.70 DOMNode->hasAttributes()
8.28.71 DOMNode->hasChildNodes()
8.28.72 DOMNode->insertBefore()
8.28.73 DOMNode->isSameNode()
8.28.74 DOMNode->isSupported()
8.28.75 DOMNode->lookupNamespaceURI()
8.28.76 DOMNode->lookupPrefix()
8.28.77 DOMNode->normalize()
8.28.78 DOMNode->removeChild()
8.28.79 DOMNode->replaceChild()
8.28.80 DOMNodelist->item()
8.28.81 DOMProcessingInstruction->__construct()
8.28.82 DOMText->__construct()
8.28.83 DOMText->isWhitespaceInElementContent()
8.28.84 DOMText->splitText()
8.28.85 DOMXPath->__construct()
8.28.86 DOMXPath->evaluate()
8.28.87 DOMXPath->query()
8.28.88 DOMXPath->registerNamespace()
8.28.89 dom_import_simplexml
8.29 Fonctions DOM XML
8.29.1 Introduction
8.29.2 Pré-requis
8.29.3 Installation
8.29.4 Fonctions dépréciées
8.29.5 Constantes pré-définies
8.29.6 Classes
8.29.7 Exemples
8.29.8 DomAttribute->name
8.29.9 DomAttribute->set_value
8.29.10 DomAttribute->specified
8.29.11 DomAttribute->value
8.29.12 DomDocument->add_root
8.29.13 DomDocument->create_attribute
8.29.14 DomDocument->create_cdata_section
8.29.15 DomDocument->create_comment
8.29.16 DomDocument->create_element_ns
8.29.17 DomDocument->create_element
8.29.18 DomDocument->create_entity_reference
8.29.19 DomDocument->create_processing_instruction
8.29.20 DomDocument->create_text_node
8.29.21 DomDocument->doctype
8.29.22 DomDocument->document_element
8.29.23 DomDocument->dump_file
8.29.24 DomDocument->dump_mem
8.29.25 DomDocument->get_element_by_id
8.29.26 DomDocument->get_elements_by_tagname
8.29.27 DomDocument->html_dump_mem
8.29.28 DomDocument->xinclude
8.29.29 DomDocumentType->entities()
8.29.30 DomDocumentType->internal_subset()
8.29.31 DomDocumentType->name()
8.29.32 DomDocumentType->notations()
8.29.33 DomDocumentType->public_id()
8.29.34 DomDocumentType->system_id()
8.29.35 DomElement->get_attribute_node()
8.29.36 DomElement->get_attribute()
8.29.37 DomElement->get_elements_by_tagname()
8.29.38 DomElement->has_attribute()
8.29.39 DomElement->remove_attribute()
8.29.40 DomElement->set_attribute()
8.29.41 DomElement->tagname()
8.29.42 DomNode->add_namespace
8.29.43 DomNode->append_child
8.29.44 DomNode->append_sibling
8.29.45 DomNode->attributes
8.29.46 DomNode->child_nodes
8.29.47 DomNode->clone_node
8.29.48 DomNode->dump_node
8.29.49 DomNode->first_child
8.29.50 DomNode->get_content
8.29.51 DomNode->has_attributes
8.29.52 DomNode->has_child_nodes
8.29.53 DomNode->insert_before
8.29.54 DomNode->is_blank_node
8.29.55 DomNode->last_child
8.29.56 DomNode->next_sibling
8.29.57 DomNode->node_name
8.29.58 DomNode->node_type
8.29.59 DomNode->node_value
8.29.60 DomNode->owner_document
8.29.61 DomNode->parent_node
8.29.62 DomNode->prefix
8.29.63 DomNode->previous_sibling
8.29.64 DomNode->remove_child
8.29.65 DomNode->replace_child
8.29.66 DomNode->replace_node
8.29.67 DomNode->set_content
8.29.68 DomNode->set_name
8.29.69 DomNode->set_namespace
8.29.70 DomNode->unlink_node
8.29.71 DomProcessingInstruction->data
8.29.72 DomProcessingInstruction->target
8.29.73 domxml_new_doc
8.29.74 domxml_open_file
8.29.75 domxml_open_mem
8.29.76 domxml_version
8.29.77 domxml_xmltree
8.29.78 domxml_xslt_stylesheet_doc
8.29.79 domxml_xslt_stylesheet_file
8.29.80 domxml_xslt_stylesheet
8.29.81 domxml_xslt_version
8.29.82 DomXsltStylesheet->process()
8.29.83 DomXsltStylesheet->result_dump_file()
8.29.84 DomXsltStylesheet->result_dump_mem()
8.29.85 xpath_eval_expression
8.29.86 xpath_eval
8.29.87 xpath_new_context
8.29.88 xpath_register_ns_auto
8.29.89 xpath_register_ns
8.29.90 xptr_eval
8.29.91 xptr_new_context
8.30 Fonctions .NET
8.30.1 Introduction
8.30.2 dotnet_load
8.31 Gestion des erreurs
8.31.1 Introduction
8.31.2 Pré-requis
8.31.3 Installation
8.31.4 Configuration à l'exécution
8.31.4.1 error_reporting
8.31.4.2 display_errors
8.31.4.3 display_startup_errors
8.31.4.4 log_errors
8.31.4.5 log_errors_max_len
8.31.4.6 ignore_repeated_errors
8.31.4.7 ignore_repeated_source
8.31.4.8 report_memleaks
8.31.4.9 track_errors
8.31.4.10 html_errors
8.31.4.11 docref_root
8.31.4.12 docref_ext
8.31.4.13 error_prepend_string
8.31.4.14 error_append_string
8.31.4.15 error_log
8.31.4.16 warn_plus_overloading
8.31.5 Constantes pré-définies
8.31.5.1 Erreurs et historique
8.31.5.1.1 e-error
8.31.5.1.2 e-warning
8.31.5.1.3 e-parse
8.31.5.1.4 e-notice
8.31.5.1.5 e-core-error
8.31.5.1.6 e-core-warning
8.31.5.1.7 e-compile-error
8.31.5.1.8 e-compile-warning
8.31.5.1.9 e-user-error
8.31.5.1.10 e-user-warning
8.31.5.1.11 e-user-notice
8.31.5.1.12 e-all
8.31.5.1.13 e-strict
8.31.6 Exemples
8.31.7 Voir aussi
8.31.8 debug_backtrace
8.31.9 debug_print_backtrace
8.31.10 error_log
8.31.11 error_reporting
8.31.12 restore_error_handler
8.31.13 restore_exception_handler
8.31.14 set_error_handler
8.31.15 set_exception_handler
8.31.16 trigger_error
8.31.17 user_error
8.32 Exécution de programmes externes
8.32.1 Introduction
8.32.2 Pré-requis
8.32.3 Installation
8.32.4 Configuration à l'exécution
8.32.5 Types de ressources
8.32.6 Constantes pré-définies
8.32.7 Voir aussi
8.32.8 escapeshellarg
8.32.9 escapeshellcmd
8.32.10 exec
8.32.11 passthru
8.32.12 proc_close
8.32.13 proc_get_status
8.32.14 proc_nice
8.32.15 proc_open
8.32.16 proc_terminate
8.32.17 shell_exec
8.32.18 system
8.33 EXIF
8.33.1 Introduction
8.33.2 Pré-requis
8.33.3 Installation
8.33.4 Configuration à l'exécution
8.33.4.1 exif.encode_unicode
8.33.4.2 exif.decode_unicode_motorola
8.33.4.3 exif.decode_unicode_intel
8.33.4.4 exif.encode_jis
8.33.4.5 exif.decode_jis_motorola
8.33.4.6 exif.decode_jis_intel
8.33.5 Types de ressources
8.33.6 Constantes pré-définies
8.33.7 exif_imagetype
8.33.8 exif_read_data
8.33.9 exif_tagname
8.33.10 exif_thumbnail
8.33.11 read_exif_data
8.34 Fonctions de monitorage d'altération de fichiers
8.34.1 Introduction
8.34.2 Pré-requis
8.34.3 Installation
8.34.4 Configuration à l'exécution
8.34.5 Types de ressources
8.34.5.1 Resources FAM
8.34.6 Constantes pré-définies
8.34.7 fam_cancel_monitor
8.34.8 fam_close
8.34.9 fam_monitor_collection
8.34.10 fam_monitor_directory
8.34.11 fam_monitor_file
8.34.12 fam_next_event
8.34.13 fam_open
8.34.14 fam_pending
8.34.15 fam_resume_monitor
8.34.16 fam_suspend_monitor
8.35 FrontBase
8.35.1 Introduction
8.35.2 Pré-requis
8.35.3 Installation
8.35.4 Configuration à l'exécution
8.35.5 Types de ressources
8.35.6 Constantes pré-définies
8.35.7 fbsql_affected_rows
8.35.8 fbsql_autocommit
8.35.9 fbsql_blob_size
8.35.10 fbsql_change_user
8.35.11 fbsql_clob_size
8.35.12 fbsql_close
8.35.13 fbsql_commit
8.35.14 fbsql_connect
8.35.15 fbsql_create_blob
8.35.16 fbsql_create_clob
8.35.17 fbsql_create_db
8.35.18 fbsql_data_seek
8.35.19 fbsql_database_password
8.35.20 fbsql_database
8.35.21 fbsql_db_query
8.35.22 fbsql_db_status
8.35.23 fbsql_drop_db
8.35.24 fbsql_errno
8.35.25 fbsql_error
8.35.26 fbsql_fetch_array
8.35.27 fbsql_fetch_assoc
8.35.28 fbsql_fetch_field
8.35.29 fbsql_fetch_lengths
8.35.30 fbsql_fetch_object
8.35.31 fbsql_fetch_row
8.35.32 fbsql_field_flags
8.35.33 fbsql_field_len
8.35.34 fbsql_field_name
8.35.35 fbsql_field_seek
8.35.36 fbsql_field_table
8.35.37 fbsql_field_type
8.35.38 fbsql_free_result
8.35.39 fbsql_get_autostart_info
8.35.40 fbsql_hostname
8.35.41 fbsql_insert_id
8.35.42 fbsql_list_dbs
8.35.43 fbsql_list_fields
8.35.44 fbsql_list_tables
8.35.45 fbsql_next_result
8.35.46 fbsql_num_fields
8.35.47 fbsql_num_rows
8.35.48 fbsql_password
8.35.49 fbsql_pconnect
8.35.50 fbsql_query
8.35.51 fbsql_read_blob
8.35.52 fbsql_read_clob
8.35.53 fbsql_result
8.35.54 fbsql_rollback
8.35.55 fbsql_select_db
8.35.56 fbsql_set_lob_mode
8.35.57 fbsql_set_password
8.35.58 fbsql_set_transaction
8.35.59 fbsql_start_db
8.35.60 fbsql_stop_db
8.35.61 fbsql_tablename
8.35.62 fbsql_username
8.35.63 fbsql_warnings
8.36 Forms Data Format
8.36.1 Introduction
8.36.2 Pré-requis
8.36.3 Installation
8.36.4 Configuration à l'exécution
8.36.5 Types de ressources
8.36.5.1 fdf
8.36.6 Constantes pré-définies
8.36.7 Exemples
8.36.8 fdf_add_doc_javascript
8.36.9 fdf_add_template
8.36.10 fdf_close
8.36.11 fdf_create
8.36.12 fdf_enum_values
8.36.13 fdf_errno
8.36.14 fdf_error
8.36.15 fdf_get_ap
8.36.16 fdf_get_attachment
8.36.17 fdf_get_encoding
8.36.18 fdf_get_file
8.36.19 fdf_get_flags
8.36.20 fdf_get_opt
8.36.21 fdf_get_status
8.36.22 fdf_get_value
8.36.23 fdf_get_version
8.36.24 fdf_header
8.36.25 fdf_next_field_name
8.36.26 fdf_open_string
8.36.27 fdf_open
8.36.28 fdf_remove_item
8.36.29 fdf_save_string
8.36.30 fdf_save
8.36.31 fdf_set_ap
8.36.32 fdf_set_encoding
8.36.33 fdf_set_file
8.36.34 fdf_set_flags
8.36.35 fdf_set_javascript_action
8.36.36 fdf_set_on_import_javascript
8.36.37 fdf_set_opt
8.36.38 fdf_set_status
8.36.39 fdf_set_submit_form_action
8.36.40 fdf_set_target_frame
8.36.41 fdf_set_value
8.36.42 fdf_set_version
8.37 Fonctions filePro
8.37.1 Introduction
8.37.2 Installation
8.37.3 filepro_fieldcount
8.37.4 filepro_fieldname
8.37.5 filepro_fieldtype
8.37.6 filepro_fieldwidth
8.37.7 filepro_retrieve
8.37.8 filepro_rowcount
8.37.9 filepro
8.38 Système de fichiers
8.38.1 Introduction
8.38.2 Pré-requis
8.38.3 Installation
8.38.4 Configuration à l'exécution
8.38.4.1 allow_url_fopen
8.38.4.2 user_agent
8.38.4.3 default_socket_timeout
8.38.4.4 from
8.38.4.5 auto_detect_line_endings
8.38.5 Types de ressources
8.38.6 Constantes pré-définies
8.38.7 Voir aussi
8.38.8 basename
8.38.9 chgrp
8.38.10 chmod
8.38.11 chown
8.38.12 clearstatcache
8.38.13 copy
8.38.14 delete
8.38.15 dirname
8.38.16 disk_free_space
8.38.17 disk_total_space
8.38.18 diskfreespace
8.38.19 fclose
8.38.20 feof
8.38.21 fflush
8.38.22 fgetc
8.38.23 fgetcsv
8.38.24 fgets
8.38.25 fgetss
8.38.26 file_exists
8.38.27 file_get_contents
8.38.28 file_put_contents
8.38.29 file
8.38.30 fileatime
8.38.31 filectime
8.38.32 filegroup
8.38.33 fileinode
8.38.34 filemtime
8.38.35 fileowner
8.38.36 fileperms
8.38.37 filesize
8.38.38 filetype
8.38.39 flock
8.38.40 fnmatch
8.38.41 fopen
8.38.42 fpassthru
8.38.43 fputcsv
8.38.44 fputs
8.38.45 fread
8.38.46 fscanf
8.38.47 fseek
8.38.48 fstat
8.38.49 ftell
8.38.50 ftruncate
8.38.51 fwrite
8.38.52 glob
8.38.53 is_dir
8.38.54 is_executable
8.38.55 is_file
8.38.56 is_link
8.38.57 is_readable
8.38.58 is_uploaded_file
8.38.59 is_writable
8.38.60 is_writeable
8.38.61 link
8.38.62 linkinfo
8.38.63 lstat
8.38.64 mkdir
8.38.65 move_uploaded_file
8.38.66 parse_ini_file
8.38.67 pathinfo
8.38.68 pclose
8.38.69 popen
8.38.70 readfile
8.38.71 readlink
8.38.72 realpath
8.38.73 rename
8.38.74 rewind
8.38.75 rmdir
8.38.76 set_file_buffer
8.38.77 stat
8.38.78 symlink
8.38.79 tempnam
8.38.80 tmpfile
8.38.81 touch
8.38.82 umask
8.38.83 unlink
8.39 Fonctions FriBiDi
8.39.1 Introduction
8.39.2 Pré-requis
8.39.3 Installation
8.39.4 Configuration à l'exécution
8.39.5 Types de ressources
8.39.6 Constantes pré-définies
8.39.7 fribidi_log2vis
8.40 Fonctions FTP
8.40.1 Introduction
8.40.2 Pré-requis
8.40.3 Installation
8.40.4 Configuration à l'exécution
8.40.5 Types de ressources
8.40.6 Constantes pré-définies
8.40.7 Exemples
8.40.8 ftp_alloc
8.40.9 ftp_cdup
8.40.10 ftp_chdir
8.40.11 ftp_chmod
8.40.12 ftp_close
8.40.13 ftp_connect
8.40.14 ftp_delete
8.40.15 ftp_exec
8.40.16 ftp_fget
8.40.17 ftp_fput
8.40.18 ftp_get_option
8.40.19 ftp_get
8.40.20 ftp_login
8.40.21 ftp_mdtm
8.40.22 ftp_mkdir
8.40.23 ftp_nb_continue
8.40.24 ftp_nb_fget
8.40.25 ftp_nb_fput
8.40.26 ftp_nb_get
8.40.27 ftp_nb_put
8.40.28 ftp_nlist
8.40.29 ftp_pasv
8.40.30 ftp_put
8.40.31 ftp_pwd
8.40.32 ftp_quit
8.40.33 ftp_raw
8.40.34 ftp_rawlist
8.40.35 ftp_rename
8.40.36 ftp_rmdir
8.40.37 ftp_set_option
8.40.38 ftp_site
8.40.39 ftp_size
8.40.40 ftp_ssl_connect
8.40.41 ftp_systype
8.41 Fonctions
8.41.1 Introduction
8.41.2 Pré-requis
8.41.3 Installation
8.41.4 Configuration à l'exécution
8.41.5 Constantes pré-définies
8.41.6 call_user_func_array
8.41.7 call_user_func
8.41.8 create_function
8.41.9 func_get_arg
8.41.10 func_get_args
8.41.11 func_num_args
8.41.12 function_exists
8.41.13 get_defined_functions
8.41.14 register_shutdown_function
8.41.15 register_tick_function
8.41.16 unregister_tick_function
8.42 Gettext (GNU)
8.42.1 Introduction
8.42.2 Pré-requis
8.42.3 Installation
8.42.4 Configuration à l'exécution
8.42.5 Types de ressources
8.42.6 Constantes pré-définies
8.42.7 bind_textdomain_codeset
8.42.8 bindtextdomain
8.42.9 dcgettext
8.42.10 dcngettext
8.42.11 dgettext
8.42.12 dngettext
8.42.13 gettext
8.42.14 ngettext
8.42.15 textdomain
8.43 Fonctions GMP
8.43.1 Introduction
8.43.2 Pré-requis
8.43.3 Installation
8.43.4 Configuration à l'exécution
8.43.5 Types de ressources
8.43.6 Constantes pré-définies
8.43.7 Exemples
8.43.8 Voir aussi
8.43.9 gmp_abs
8.43.10 gmp_add
8.43.11 gmp_and
8.43.12 gmp_clrbit
8.43.13 gmp_cmp
8.43.14 gmp_com
8.43.15 gmp_div_q
8.43.16 gmp_div_qr
8.43.17 gmp_div_r
8.43.18 gmp_div
8.43.19 gmp_divexact
8.43.20 gmp_fact
8.43.21 gmp_gcd
8.43.22 gmp_gcdext
8.43.23 gmp_hamdist
8.43.24 gmp_init
8.43.25 gmp_intval
8.43.26 gmp_invert
8.43.27 gmp_jacobi
8.43.28 gmp_legendre
8.43.29 gmp_mod
8.43.30 gmp_mul
8.43.31 gmp_neg
8.43.32 gmp_or
8.43.33 gmp_perfect_square
8.43.34 gmp_popcount
8.43.35 gmp_pow
8.43.36 gmp_powm
8.43.37 gmp_prob_prime
8.43.38 gmp_random
8.43.39 gmp_scan0
8.43.40 gmp_scan1
8.43.41 gmp_setbit
8.43.42 gmp_sign
8.43.43 gmp_sqrt
8.43.44 gmp_sqrtrem
8.43.45 gmp_strval
8.43.46 gmp_sub
8.43.47 gmp_xor
8.44 HTTP
8.44.1 Introduction
8.44.2 Pré-requis
8.44.3 Installation
8.44.4 Configuration à l'exécution
8.44.5 Types de ressources
8.44.6 Constantes pré-définies
8.44.7 header
8.44.8 headers_list
8.44.9 headers_sent
8.44.10 setcookie
8.44.11 setrawcookie
8.45 Hyperwave
8.45.1 Introduction
8.45.2 Pré-requis
8.45.3 Installation
8.45.4 Intégration avec Apache
8.45.5 Configuration à l'exécution
8.45.6 Types de ressources
8.45.7 Constantes pré-définies
8.45.8 A faire
8.45.9 hw_Array2Objrec
8.45.10 hw_changeobject
8.45.11 hw_Children
8.45.12 hw_ChildrenObj
8.45.13 hw_Close
8.45.14 hw_Connect
8.45.15 hw_connection_info
8.45.16 hw_cp
8.45.17 hw_Deleteobject
8.45.18 hw_DocByAnchor
8.45.19 hw_DocByAnchorObj
8.45.20 hw_Document_Attributes
8.45.21 hw_Document_BodyTag
8.45.22 hw_Document_Content
8.45.23 hw_Document_SetContent
8.45.24 hw_Document_Size
8.45.25 hw_dummy
8.45.26 hw_EditText
8.45.27 hw_Error
8.45.28 hw_ErrorMsg
8.45.29 hw_Free_Document
8.45.30 hw_GetAnchors
8.45.31 hw_GetAnchorsObj
8.45.32 hw_GetAndLock
8.45.33 hw_GetChildColl
8.45.34 hw_GetChildCollObj
8.45.35 hw_GetChildDocColl
8.45.36 hw_GetChildDocCollObj
8.45.37 hw_GetObject
8.45.38 hw_GetObjectByQuery
8.45.39 hw_GetObjectByQueryColl
8.45.40 hw_GetObjectByQueryCollObj
8.45.41 hw_GetObjectByQueryObj
8.45.42 hw_GetParents
8.45.43 hw_GetParentsObj
8.45.44 hw_getrellink
8.45.45 hw_GetRemote
8.45.46 hw_getremotechildren
8.45.47 hw_GetSrcByDestObj
8.45.48 hw_GetText
8.45.49 hw_getusername
8.45.50 hw_Identify
8.45.51 hw_InCollections
8.45.52 hw_Info
8.45.53 hw_InsColl
8.45.54 hw_InsDoc
8.45.55 hw_insertanchors
8.45.56 hw_InsertDocument
8.45.57 hw_InsertObject
8.45.58 hw_mapid
8.45.59 hw_Modifyobject
8.45.60 hw_mv
8.45.61 hw_New_Document
8.45.62 hw_objrec2array
8.45.63 hw_Output_Document
8.45.64 hw_pConnect
8.45.65 hw_PipeDocument
8.45.66 hw_Root
8.45.67 hw_setlinkroot
8.45.68 hw_stat
8.45.69 hw_Unlock
8.45.70 hw_Who
8.46 Hyperwave API
8.46.1 Introduction
8.46.2 Pré-requis
8.46.3 Installation
8.46.4 intégration dans Apache
8.46.5 Configuration à l'exécution
8.46.6 Types de ressources
8.46.7 Constantes pré-définies
8.46.8 Classes
8.46.9 hw_api_attribute->key
8.46.10 hw_api_attribute->langdepvalue
8.46.11 hw_api_attribute->value
8.46.12 hw_api_attribute->values
8.46.13 hw_api_attribute
8.46.14 hw_api->checkin
8.46.15 hw_api->checkout
8.46.16 hw_api->children
8.46.17 hw_api_content->mimetype
8.46.18 hw_api_content->read
8.46.19 hw_api->content
8.46.20 hw_api->copy
8.46.21 hw_api->dbstat
8.46.22 hw_api->dcstat
8.46.23 hw_api->dstanchors
8.46.24 hw_api->dstofsrcanchor
8.46.25 hw_api_error->count
8.46.26 hw_api_error->reason
8.46.27 hw_api->find
8.46.28 hw_api->ftstat
8.46.29 hwapi_hgcsp
8.46.30 hw_api->hwstat
8.46.31 hw_api->identify
8.46.32 hw_api->info
8.46.33 hw_api->insert
8.46.34 hw_api->insertanchor
8.46.35 hw_api->insertcollection
8.46.36 hw_api->insertdocument
8.46.37 hw_api->link
8.46.38 hw_api->lock
8.46.39 hw_api->move
8.46.40 hw_api_content
8.46.41 hw_api_object->assign
8.46.42 hw_api_object->attreditable
8.46.43 hw_api_object->count
8.46.44 hw_api_object->insert
8.46.45 hw_api_object
8.46.46 hw_api_object->remove
8.46.47 hw_api_object->title
8.46.48 hw_api_object->value
8.46.49 hw_api->object
8.46.50 hw_api->objectbyanchor
8.46.51 hw_api->parents
8.46.52 hw_api_reason->description
8.46.53 hw_api_reason->type
8.46.54 hw_api->remove
8.46.55 hw_api->replace
8.46.56 hw_api->setcommittedversion
8.46.57 hw_api->srcanchors
8.46.58 hw_api->srcsofdst
8.46.59 hw_api->unlock
8.46.60 hw_api->user
8.46.61 hw_api->userlist
8.47 Fonctions Firebird/InterBase
8.47.1 Introduction
8.47.2 Pré-requis
8.47.3 Installation
8.47.4 Configuration à l'exécution
8.47.4.1 ibase.allow_persistent
8.47.4.2 ibase.max_persistent
8.47.4.3 ibase.max_links
8.47.4.4 ibase.default_db
8.47.4.5 ibase.default_user
8.47.4.6 ibase.default_password
8.47.4.7 ibase.default_charset
8.47.4.8 ibase.timestampformat
8.47.4.9 ibase.dateformat
8.47.4.10 ibase.timeformat
8.47.5 Types de ressources
8.47.6 Constantes pré-définies
8.47.7 ibase_add_user
8.47.8 ibase_affected_rows
8.47.9 ibase_backup
8.47.10 ibase_blob_add
8.47.11 ibase_blob_cancel
8.47.12 ibase_blob_close
8.47.13 ibase_blob_create
8.47.14 ibase_blob_echo
8.47.15 ibase_blob_get
8.47.16 ibase_blob_import
8.47.17 ibase_blob_info
8.47.18 ibase_blob_open
8.47.19 ibase_close
8.47.20 ibase_commit_ret
8.47.21 ibase_commit
8.47.22 ibase_connect
8.47.23 ibase_db_info
8.47.24 ibase_delete_user
8.47.25 ibase_drop_db
8.47.26 ibase_errcode
8.47.27 ibase_errmsg
8.47.28 ibase_execute
8.47.29 ibase_fetch_assoc
8.47.30 ibase_fetch_object
8.47.31 ibase_fetch_row
8.47.32 ibase_field_info
8.47.33 ibase_free_event_handler
8.47.34 ibase_free_query
8.47.35 ibase_free_result
8.47.36 ibase_gen_id
8.47.37 ibase_maintain_db
8.47.38 ibase_modify_user
8.47.39 ibase_name_result
8.47.40 ibase_num_fields
8.47.41 ibase_num_params
8.47.42 ibase_param_info
8.47.43 ibase_pconnect
8.47.44 ibase_prepare
8.47.45 ibase_query
8.47.46 ibase_restore
8.47.47 ibase_rollback_ret
8.47.48 ibase_rollback
8.47.49 ibase_server_info
8.47.50 ibase_service_attach
8.47.51 ibase_service_detach
8.47.52 ibase_set_event_handler
8.47.53 ibase_timefmt
8.47.54 ibase_trans
8.47.55 ibase_wait_event
8.48 ICAP
8.48.1 Introduction
8.48.2 Pré-requis
8.48.3 Installation
8.48.4 Configuration à l'exécution
8.48.5 Types de ressources
8.48.6 Constantes pré-définies
8.48.7 icap_close
8.48.8 icap_create_calendar
8.48.9 icap_delete_calendar
8.48.10 icap_delete_event
8.48.11 icap_fetch_event
8.48.12 icap_list_alarms
8.48.13 icap_list_events
8.48.14 icap_open
8.48.15 icap_rename_calendar
8.48.16 icap_reopen
8.48.17 icap_snooze
8.48.18 icap_store_event
8.49 Iconv
8.49.1 Introduction
8.49.2 Pré-requis
8.49.3 Installation
8.49.4 Configuration à l'exécution
8.49.5 Types de ressources
8.49.6 Constantes pré-définies
8.49.7 Voir aussi
8.49.8 iconv_get_encoding
8.49.9 iconv_mime_decode_headers
8.49.10 iconv_mime_decode
8.49.11 iconv_mime_encode
8.49.12 iconv_set_encoding
8.49.13 iconv_strlen
8.49.14 iconv_strpos
8.49.15 iconv_strrpos
8.49.16 iconv_substr
8.49.17 iconv
8.49.18 ob_iconv_handler
8.50 Fonctions ID3
8.50.1 Introduction
8.50.2 Pré-requis
8.50.3 Installation
8.50.4 Configuration à l'exécution
8.50.5 Types de ressources
8.50.6 Constantes pré-définies
8.50.7 id3_get_frame_long_name
8.50.8 id3_get_frame_short_name
8.50.9 id3_get_genre_id
8.50.10 id3_get_genre_list
8.50.11 id3_get_genre_name
8.50.12 id3_get_tag
8.50.13 id3_get_version
8.50.14 id3_remove_tag
8.50.15 id3_set_tag
8.51 Informix
8.51.1 Introduction
8.51.2 Pré-requis
8.51.3 Installation
8.51.4 Configuration à l'exécution
8.51.4.1 ifx.allow_persistent
8.51.4.2 ifx.max_persistent
8.51.4.3 ifx.max_links
8.51.4.4 ifx.default_host
8.51.4.5 ifx.default_user
8.51.4.6 ifx.default_password
8.51.4.7 ifx.blobinfile
8.51.4.8 ifx.textasvarchar
8.51.4.9 ifx.byteasvarchar
8.51.4.10 ifx.charasvarchar
8.51.4.11 ifx.nullformat
8.51.5 Types de ressources
8.51.6 Constantes pré-définies
8.51.7 ifx_affected_rows
8.51.8 ifx_blobinfile_mode
8.51.9 ifx_byteasvarchar
8.51.10 ifx_close
8.51.11 ifx_connect
8.51.12 ifx_copy_blob
8.51.13 ifx_create_blob
8.51.14 ifx_create_char
8.51.15 ifx_do
8.51.16 ifx_error
8.51.17 ifx_errormsg
8.51.18 ifx_fetch_row
8.51.19 ifx_fieldproperties
8.51.20 ifx_fieldtypes
8.51.21 ifx_free_blob
8.51.22 ifx_free_char
8.51.23 ifx_free_result
8.51.24 ifx_get_blob
8.51.25 ifx_get_char
8.51.26 ifx_getsqlca
8.51.27 ifx_htmltbl_result
8.51.28 ifx_nullformat
8.51.29 ifx_num_fields
8.51.30 ifx_num_rows
8.51.31 ifx_pconnect
8.51.32 ifx_prepare
8.51.33 ifx_query
8.51.34 ifx_textasvarchar
8.51.35 ifx_update_blob
8.51.36 ifx_update_char
8.51.37 ifxus_close_slob
8.51.38 ifxus_create_slob
8.51.39 ifxus_free_slob
8.51.40 ifxus_open_slob
8.51.41 ifxus_read_slob
8.51.42 ifxus_seek_slob
8.51.43 ifxus_tell_slob
8.51.44 ifxus_write_slob
8.52 Fonctions d'administration d'IIS
8.52.1 Introduction
8.52.2 Pré-requis
8.52.3 Installation
8.52.4 Configuration à l'exécution
8.52.5 Types de ressources
8.52.6 Constantes pré-définies
8.52.7 iis_add_server
8.52.8 iis_get_dir_security
8.52.9 iis_get_script_map
8.52.10 iis_get_server_by_comment
8.52.11 iis_get_server_by_path
8.52.12 iis_get_server_rights
8.52.13 iis_get_service_state
8.52.14 iis_remove_server
8.52.15 iis_set_app_settings
8.52.16 iis_set_dir_security
8.52.17 iis_set_script_map
8.52.18 iis_set_server_rights
8.52.19 iis_start_server
8.52.20 iis_start_service
8.52.21 iis_stop_server
8.52.22 iis_stop_service
8.53 Images
8.53.1 Introduction
8.53.2 Pré-requis
8.53.3 Installation
8.53.3.1 image.configure.php3
8.53.4 Configuration à l'exécution
8.53.5 Types de ressources
8.53.6 Constantes pré-définies
8.53.7 Exemples
8.53.8 gd_info
8.53.9 getimagesize
8.53.10 image_type_to_extension
8.53.11 image_type_to_mime_type
8.53.12 image2wbmp
8.53.13 imagealphablending
8.53.14 imageantialias
8.53.15 imagearc
8.53.16 imagechar
8.53.17 imagecharup
8.53.18 imagecolorallocate
8.53.19 imagecolorallocatealpha
8.53.20 imagecolorat
8.53.21 imagecolorclosest
8.53.22 imagecolorclosestalpha
8.53.23 imagecolorclosesthwb
8.53.24 imagecolordeallocate
8.53.25 imagecolorexact
8.53.26 imagecolorexactalpha
8.53.27 imagecolormatch
8.53.28 imagecolorresolve
8.53.29 imagecolorresolvealpha
8.53.30 imagecolorset
8.53.31 imagecolorsforindex
8.53.32 imagecolorstotal
8.53.33 imagecolortransparent
8.53.34 imageconvolution
8.53.35 imagecopy
8.53.36 imagecopymerge
8.53.37 imagecopymergegray
8.53.38 imagecopyresampled
8.53.39 imagecopyresized
8.53.40 imagecreate
8.53.41 imagecreatefromgd
8.53.42 imagecreatefromgd2
8.53.43 imagecreatefromgd2part
8.53.44 imagecreatefromgif
8.53.45 imagecreatefromjpeg
8.53.46 imagecreatefrompng
8.53.47 imagecreatefromstring
8.53.48 imagecreatefromwbmp
8.53.49 imagecreatefromxbm
8.53.50 imagecreatefromxpm
8.53.51 imagecreatetruecolor
8.53.52 imagedashedline
8.53.53 imagedestroy
8.53.54 imageellipse
8.53.55 imagefill
8.53.56 imagefilledarc
8.53.57 imagefilledellipse
8.53.58 imagefilledpolygon
8.53.59 imagefilledrectangle
8.53.60 imagefilltoborder
8.53.61 imagefilter
8.53.62 imagefontheight
8.53.63 imagefontwidth
8.53.64 imageftbbox
8.53.65 imagefttext
8.53.66 imagegammacorrect
8.53.67 imagegd
8.53.68 imagegd2
8.53.69 imagegif
8.53.70 imageinterlace
8.53.71 imageistruecolor
8.53.72 imagejpeg
8.53.73 imagelayereffect
8.53.74 imageline
8.53.75 imageloadfont
8.53.76 imagepalettecopy
8.53.77 imagepng
8.53.78 imagepolygon
8.53.79 imagepsbbox
8.53.80 imagepscopyfont
8.53.81 imagepsencodefont
8.53.82 imagepsextendfont
8.53.83 imagepsfreefont
8.53.84 imagepsloadfont
8.53.85 imagepsslantfont
8.53.86 imagepstext
8.53.87 imagerectangle
8.53.88 imagerotate
8.53.89 imagesavealpha
8.53.90 imagesetbrush
8.53.91 imagesetpixel
8.53.92 imagesetstyle
8.53.93 imagesetthickness
8.53.94 imagesettile
8.53.95 imagestring
8.53.96 imagestringup
8.53.97 imagesx
8.53.98 imagesy
8.53.99 imagetruecolortopalette
8.53.100 imagettfbbox
8.53.101 imagettftext
8.53.102 imagetypes
8.53.103 imagewbmp
8.53.104 imagexbm
8.53.105 iptcembed
8.53.106 iptcparse
8.53.107 jpeg2wbmp
8.53.108 png2wbmp
8.54 IMAP
8.54.1 Introduction
8.54.2 Pré-requis
8.54.3 Installation
8.54.4 Configuration à l'exécution
8.54.5 Types de ressources
8.54.6 Constantes pré-définies
8.54.7 Voir aussi
8.54.8 imap_8bit
8.54.9 imap_alerts
8.54.10 imap_append
8.54.11 imap_base64
8.54.12 imap_binary
8.54.13 imap_body
8.54.14 imap_bodystruct
8.54.15 imap_check
8.54.16 imap_clearflag_full
8.54.17 imap_close
8.54.18 imap_createmailbox
8.54.19 imap_delete
8.54.20 imap_deletemailbox
8.54.21 imap_errors
8.54.22 imap_expunge
8.54.23 imap_fetch_overview
8.54.24 imap_fetchbody
8.54.25 imap_fetchheader
8.54.26 imap_fetchstructure
8.54.27 imap_get_quota
8.54.28 imap_get_quotaroot
8.54.29 imap_getacl
8.54.30 imap_getmailboxes
8.54.31 imap_getsubscribed
8.54.32 imap_header
8.54.33 imap_headerinfo
8.54.34 imap_headers
8.54.35 imap_last_error
8.54.36 imap_list
8.54.37 imap_listmailbox
8.54.38 imap_listscan
8.54.39 imap_listsubscribed
8.54.40 imap_lsub
8.54.41 imap_mail_compose
8.54.42 imap_mail_copy
8.54.43 imap_mail_move
8.54.44 imap_mail
8.54.45 imap_mailboxmsginfo
8.54.46 imap_mime_header_decode
8.54.47 imap_msgno
8.54.48 imap_num_msg
8.54.49 imap_num_recent
8.54.50 imap_open
8.54.51 imap_ping
8.54.52 imap_qprint
8.54.53 imap_renamemailbox
8.54.54 imap_reopen
8.54.55 imap_rfc822_parse_adrlist
8.54.56 imap_rfc822_parse_headers
8.54.57 imap_rfc822_write_address
8.54.58 imap_scanmailbox
8.54.59 imap_search
8.54.60 imap_set_quota
8.54.61 imap_setacl
8.54.62 imap_setflag_full
8.54.63 imap_sort
8.54.64 imap_status
8.54.65 imap_subscribe
8.54.66 imap_thread
8.54.67 imap_timeout
8.54.68 imap_uid
8.54.69 imap_undelete
8.54.70 imap_unsubscribe
8.54.71 imap_utf7_decode
8.54.72 imap_utf7_encode
8.54.73 imap_utf8
8.55 Options PHP et informations
8.55.1 Introduction
8.55.2 Pré-requis
8.55.3 Installation
8.55.4 Configuration à l'exécution
8.55.4.1 assert.active
8.55.4.2 assert.bail
8.55.4.3 assert.warning
8.55.4.4 assert.callback
8.55.4.5 assert.quiet_eval
8.55.4.6 enable_dl
8.55.4.7 max_execution_time
8.55.4.8 max_input_time
8.55.4.9 magic_quotes_gpc
8.55.4.10 magic_quotes_runtime
8.55.5 Types de ressources
8.55.6 Constantes pré-définies
8.55.7 assert_options
8.55.8 assert
8.55.9 dl
8.55.10 extension_loaded
8.55.11 get_cfg_var
8.55.12 get_current_user
8.55.13 get_defined_constants
8.55.14 get_extension_funcs
8.55.15 get_include_path
8.55.16 get_included_files
8.55.17 get_loaded_extensions
8.55.18 get_magic_quotes_gpc
8.55.19 get_magic_quotes_runtime
8.55.20 get_required_files
8.55.21 getenv
8.55.22 getlastmod
8.55.23 getmygid
8.55.24 getmyinode
8.55.25 getmypid
8.55.26 getmyuid
8.55.27 getopt
8.55.28 getrusage
8.55.29 ini_alter
8.55.30 ini_get_all
8.55.31 ini_get
8.55.32 ini_restore
8.55.33 ini_set
8.55.34 main
8.55.35 memory_get_usage
8.55.36 php_ini_scanned_files
8.55.37 php_logo_guid
8.55.38 php_sapi_name
8.55.39 php_uname
8.55.40 phpcredits
8.55.41 phpinfo
8.55.42 phpversion
8.55.43 putenv
8.55.44 restore_include_path
8.55.45 set_include_path
8.55.46 set_magic_quotes_runtime
8.55.47 set_time_limit
8.55.48 version_compare
8.55.49 zend_logo_guid
8.55.50 zend_version
8.56 Ingres II
8.56.1 Introduction
8.56.2 Pré-requis
8.56.3 Installation
8.56.4 Configuration à l'exécution
8.56.5 Types de ressources
8.56.6 Constantes pré-définies
8.56.7 ingres_autocommit
8.56.8 ingres_close
8.56.9 ingres_commit
8.56.10 ingres_connect
8.56.11 ingres_cursor
8.56.12 ingres_errno
8.56.13 ingres_error
8.56.14 ingres_errsqlstate
8.56.15 ingres_fetch_array
8.56.16 ingres_fetch_object
8.56.17 ingres_fetch_row
8.56.18 ingres_field_length
8.56.19 ingres_field_name
8.56.20 ingres_field_nullable
8.56.21 ingres_field_precision
8.56.22 ingres_field_scale
8.56.23 ingres_field_type
8.56.24 ingres_num_fields
8.56.25 ingres_num_rows
8.56.26 ingres_pconnect
8.56.27 ingres_query
8.56.28 ingres_rollback
8.57 IRC
8.57.1 Introduction
8.57.2 Installation
8.57.3 Configuration à l'exécution
8.57.4 Types de ressources
8.57.5 Constantes pré-définies
8.57.6 ircg_channel_mode
8.57.7 ircg_disconnect
8.57.8 ircg_eval_ecmascript_params
8.57.9 ircg_fetch_error_msg
8.57.10 ircg_get_username
8.57.11 ircg_html_encode
8.57.12 ircg_ignore_add
8.57.13 ircg_ignore_del
8.57.14 ircg_invite
8.57.15 ircg_is_conn_alive
8.57.16 ircg_join
8.57.17 ircg_kick
8.57.18 ircg_list
8.57.19 ircg_lookup_format_messages
8.57.20 ircg_lusers
8.57.21 ircg_msg
8.57.22 ircg_names
8.57.23 ircg_nick
8.57.24 ircg_nickname_escape
8.57.25 ircg_nickname_unescape
8.57.26 ircg_notice
8.57.27 ircg_oper
8.57.28 ircg_part
8.57.29 ircg_pconnect
8.57.30 ircg_register_format_messages
8.57.31 ircg_set_current
8.57.32 ircg_set_file
8.57.33 ircg_set_on_die
8.57.34 ircg_topic
8.57.35 ircg_who
8.57.36 ircg_whois
8.58 Intégration de Java avec PHP
8.58.1 Introduction
8.58.2 Pré-requis
8.58.3 Installation
8.58.4 Configuration à l'exécution
8.58.5 Types de ressources
8.58.6 Constantes pré-définies
8.58.7 Exemples
8.58.8 Java Servlet SAPI
8.58.9 java_last_exception_clear
8.58.10 java_last_exception_get
8.59 KADM5
8.59.1 Introduction
8.59.2 Constantes pré-définies
8.59.2.1 Constantes pour les attributs des balises
8.59.2.2 Constantes pour les options
8.59.3 Exemples
8.59.4 Contacts
8.59.5 kadm5_chpass_principal
8.59.6 kadm5_create_principal
8.59.7 kadm5_delete_principal
8.59.8 kadm5_destroy
8.59.9 kadm5_flush
8.59.10 kadm5_get_policies
8.59.11 kadm5_get_principal
8.59.12 kadm5_get_principals
8.59.13 kadm5_init_with_password
8.59.14 kadm5_modify_principal
8.60 LDAP
8.60.1 Introduction
8.60.2 Pré-requis
8.60.3 Installation
8.60.4 Configuration à l'exécution
8.60.5 Types de ressources
8.60.6 Constantes pré-définies
8.60.7 Exemples
8.60.8 Utiliser les fonctions LDAP de PHP
8.60.9 ldap_8859_to_t61
8.60.10 ldap_add
8.60.11 ldap_bind
8.60.12 ldap_close
8.60.13 ldap_compare
8.60.14 ldap_connect
8.60.15 ldap_count_entries
8.60.16 ldap_delete
8.60.17 ldap_dn2ufn
8.60.18 ldap_err2str
8.60.19 ldap_errno
8.60.20 ldap_error
8.60.21 ldap_explode_dn
8.60.22 ldap_first_attribute
8.60.23 ldap_first_entry
8.60.24 ldap_first_reference
8.60.25 ldap_free_result
8.60.26 ldap_get_attributes
8.60.27 ldap_get_dn
8.60.28 ldap_get_entries
8.60.29 ldap_get_option
8.60.30 ldap_get_values_len
8.60.31 ldap_get_values
8.60.32 ldap_list
8.60.33 ldap_mod_add
8.60.34 ldap_mod_del
8.60.35 ldap_mod_replace
8.60.36 ldap_modify
8.60.37 ldap_next_attribute
8.60.38 ldap_next_entry
8.60.39 ldap_next_reference
8.60.40 ldap_parse_reference
8.60.41 ldap_parse_result
8.60.42 ldap_read
8.60.43 ldap_rename
8.60.44 ldap_sasl_bind
8.60.45 ldap_search
8.60.46 ldap_set_option
8.60.47 ldap_set_rebind_proc
8.60.48 ldap_sort
8.60.49 ldap_start_tls
8.60.50 ldap_t61_to_8859
8.60.51 ldap_unbind
8.61 libxml
8.61.1 Introduction
8.61.2 Pré-requis
8.61.3 Classes pré-définies
8.61.3.1 LibXMLError
8.61.3.1.1 Propriétés
8.61.4 Constantes pré-définies
8.61.5 libxml_clear_errors
8.61.6 libxml_get_errors
8.61.7 libxml_get_last_error
8.61.8 libxml_set_streams_context
8.61.9 libxml_use_internal_errors
8.62 Fonctions LZF
8.62.1 Introduction
8.62.2 Installation
8.62.3 lzf_compress
8.62.4 lzf_decompress
8.62.5 lzf_optimized_for
8.63 Mail
8.63.1 Introduction
8.63.2 Pré-requis
8.63.3 Installation
8.63.4 Configuration à l'exécution
8.63.4.1 smtp
8.63.4.2 smtp_port
8.63.4.3 sendmail_from
8.63.4.4 sendmail_path
8.63.5 Types de ressources
8.63.6 Constantes pré-définies
8.63.7 ezmlm_hash
8.63.8 mail
8.64 Traitement d'email
8.64.1 Introduction
8.64.2 Installation
8.64.2.1 mailparse.configure
8.64.3 mailparse_determine_best_xfer_encoding
8.64.4 mailparse_msg_create
8.64.5 mailparse_msg_extract_part_file
8.64.6 mailparse_msg_extract_part
8.64.7 mailparse_msg_free
8.64.8 mailparse_msg_get_part_data
8.64.9 mailparse_msg_get_part
8.64.10 mailparse_msg_get_structure
8.64.11 mailparse_msg_parse_file
8.64.12 mailparse_msg_parse
8.64.13 mailparse_rfc822_parse_addresses
8.64.14 mailparse_stream_encode
8.64.15 mailparse_uudecode_all
8.65 Mathématiques
8.65.1 Introduction
8.65.2 Pré-requis
8.65.3 Installation
8.65.4 Configuration à l'exécution
8.65.5 Types de ressources
8.65.6 Constantes pré-définies
8.65.7 abs
8.65.8 acos
8.65.9 acosh
8.65.10 asin
8.65.11 asinh
8.65.12 atan
8.65.13 atan2
8.65.14 atanh
8.65.15 base_convert
8.65.16 bindec
8.65.17 ceil
8.65.18 cos
8.65.19 cosh
8.65.20 decbin
8.65.21 dechex
8.65.22 decoct
8.65.23 deg2rad
8.65.24 exp
8.65.25 expm1
8.65.26 floor
8.65.27 fmod
8.65.28 getrandmax
8.65.29 hexdec
8.65.30 hypot
8.65.31 is_finite
8.65.32 is_infinite
8.65.33 is_nan
8.65.34 lcg_value
8.65.35 log
8.65.36 log10
8.65.37 log1p
8.65.38 max
8.65.39 min
8.65.40 mt_getrandmax
8.65.41 mt_rand
8.65.42 mt_srand
8.65.43 octdec
8.65.44 pi
8.65.45 pow
8.65.46 rad2deg
8.65.47 rand
8.65.48 round
8.65.49 sin
8.65.50 sinh
8.65.51 sqrt
8.65.52 srand
8.65.53 tan
8.65.54 tanh
8.66 MaxDB PHP Extension
8.66.1 Introduction
8.66.2 Pré-requis
8.66.3 Installation
8.66.3.1 maxdb.configure
8.66.4 Configuration à l'exécution
8.66.4.1 maxdb.default_host
8.66.4.2 maxdb.default_db
8.66.4.3 maxdb.default_user
8.66.4.4 maxdb.default_pw
8.66.4.5 maxdb.long_readlen
8.66.5 Classes pré-définies
8.66.5.1 maxdb
8.66.5.1.1 Constructeur
8.66.5.1.2 Méthodes
8.66.5.1.3 Propriétés
8.66.5.2 maxdb_stmt
8.66.5.2.1 Méthodes
8.66.5.2.2 Propriétés
8.66.5.3 maxdb_result
8.66.5.3.1 Méthodes
8.66.5.3.2 Propriétés
8.66.6 Constantes pré-définies
8.66.7 Exemples
8.66.8 maxdb_affected_rows
8.66.9 maxdb_autocommit
8.66.10 maxdb_bind_param
8.66.11 maxdb_bind_result
8.66.12 maxdb_change_user
8.66.13 maxdb_character_set_name
8.66.14 maxdb_client_encoding
8.66.15 maxdb_close_long_data
8.66.16 maxdb_close
8.66.17 maxdb_commit
8.66.18 maxdb_connect_errno
8.66.19 maxdb_connect_error
8.66.20 maxdb_connect
8.66.21 maxdb_data_seek
8.66.22 maxdb_debug
8.66.23 maxdb_disable_reads_from_master
8.66.24 maxdb_disable_rpl_parse
8.66.25 maxdb_dump_debug_info
8.66.26 maxdb_embedded_connect
8.66.27 maxdb_enable_reads_from_master
8.66.28 maxdb_enable_rpl_parse
8.66.29 maxdb_errno
8.66.30 maxdb_error
8.66.31 maxdb_escape_string
8.66.32 maxdb_execute
8.66.33 maxdb_fetch_array
8.66.34 maxdb_fetch_assoc
8.66.35 maxdb_fetch_field_direct
8.66.36 maxdb_fetch_field
8.66.37 maxdb_fetch_fields
8.66.38 maxdb_fetch_lengths
8.66.39 maxdb_fetch_object
8.66.40 maxdb_fetch_row
8.66.41 maxdb_fetch
8.66.42 maxdb_field_count
8.66.43 maxdb_field_seek
8.66.44 maxdb_field_tell
8.66.45 maxdb_free_result
8.66.46 maxdb_get_client_info
8.66.47 maxdb_get_client_version
8.66.48 maxdb_get_host_info
8.66.49 maxdb_get_metadata
8.66.50 maxdb_get_proto_info
8.66.51 maxdb_get_server_info
8.66.52 maxdb_get_server_version
8.66.53 maxdb_info
8.66.54 maxdb_init
8.66.55 maxdb_insert_id
8.66.56 maxdb_kill
8.66.57 maxdb_master_query
8.66.58 maxdb_more_results
8.66.59 maxdb_multi_query
8.66.60 maxdb_next_result
8.66.61 maxdb_num_fields
8.66.62 maxdb_num_rows
8.66.63 maxdb_options
8.66.64 maxdb_param_count
8.66.65 maxdb_ping
8.66.66 maxdb_prepare
8.66.67 maxdb_query
8.66.68 maxdb_real_connect
8.66.69 maxdb_real_escape_string
8.66.70 maxdb_real_query
8.66.71 maxdb_report
8.66.72 maxdb_rollback
8.66.73 maxdb_rpl_parse_enabled
8.66.74 maxdb_rpl_probe
8.66.75 maxdb_rpl_query_type
8.66.76 maxdb_select_db
8.66.77 maxdb_send_long_data
8.66.78 maxdb_send_query
8.66.79 maxdb_server_end
8.66.80 maxdb_server_init
8.66.81 maxdb_set_opt
8.66.82 maxdb_sqlstate
8.66.83 maxdb_ssl_set
8.66.84 maxdb_stat
8.66.85 maxdb_stmt_affected_rows
8.66.86 maxdb_stmt_bind_param
8.66.87 maxdb_stmt_bind_result
8.66.88 maxdb_stmt_close_long_data
8.66.89 maxdb_stmt_close
8.66.90 maxdb_stmt_data_seek
8.66.91 maxdb_stmt_errno
8.66.92 maxdb_stmt_error
8.66.93 maxdb_stmt_execute
8.66.94 maxdb_stmt_fetch
8.66.95 maxdb_stmt_free_result
8.66.96 maxdb_stmt_init
8.66.97 maxdb_stmt_num_rows
8.66.98 maxdb_stmt_param_count
8.66.99 maxdb_stmt_prepare
8.66.100 maxdb_stmt_reset
8.66.101 maxdb_stmt_result_metadata
8.66.102 maxdb_stmt_send_long_data
8.66.103 maxdb_stmt_sqlstate
8.66.104 maxdb_stmt_store_result
8.66.105 maxdb_store_result
8.66.106 maxdb_thread_id
8.66.107 maxdb_thread_safe
8.66.108 maxdb_use_result
8.66.109 maxdb_warning_count
8.67 Chaînes de caractères multi-octets
8.67.1 Introduction
8.67.1.1 Pré-requis de l'encodage en PHP
8.67.2 Installation
8.67.3 Configuration à l'exécution
8.67.3.1 mbstring.language
8.67.3.2 mbstring.encoding_translation
8.67.3.3 mbstring.internal_encoding
8.67.3.4 mbstring.http_input
8.67.3.5 mbstring.http_output
8.67.3.6 mbstring.detect_order
8.67.3.7 mbstring.substitute_character
8.67.3.8 mbstring.func_overload
8.67.4 Types de ressources
8.67.5 Constantes pré-définies
8.67.6 Entrées/Sorties HTTP
8.67.7 Jeux de caractères supportés
8.67.8 Exploitation des chaînes multi-octets en PHP
8.67.9 Cas des caractères japonais
8.67.10 Références
8.67.11 Jeux de caractères supportés
8.67.12 mb_convert_case
8.67.13 mb_convert_encoding
8.67.14 mb_convert_kana
8.67.15 mb_convert_variables
8.67.16 mb_decode_mimeheader
8.67.17 mb_decode_numericentity
8.67.18 mb_detect_encoding
8.67.19 mb_detect_order
8.67.20 mb_encode_mimeheader
8.67.21 mb_encode_numericentity
8.67.22 mb_ereg_match
8.67.23 mb_ereg_replace
8.67.24 mb_ereg_search_getpos
8.67.25 mb_ereg_search_getregs
8.67.26 mb_ereg_search_init
8.67.27 mb_ereg_search_pos
8.67.28 mb_ereg_search_regs
8.67.29 mb_ereg_search_setpos
8.67.30 mb_ereg_search
8.67.31 mb_ereg
8.67.32 mb_eregi_replace
8.67.33 mb_eregi
8.67.34 mb_get_info
8.67.35 mb_http_input
8.67.36 mb_http_output
8.67.37 mb_internal_encoding
8.67.38 mb_language
8.67.39 mb_list_encodings
8.67.40 mb_output_handler
8.67.41 mb_parse_str
8.67.42 mb_preferred_mime_name
8.67.43 mb_regex_encoding
8.67.44 mb_regex_set_options
8.67.45 mb_send_mail
8.67.46 mb_split
8.67.47 mb_strcut
8.67.48 mb_strimwidth
8.67.49 mb_strlen
8.67.50 mb_strpos
8.67.51 mb_strrpos
8.67.52 mb_strtolower
8.67.53 mb_strtoupper
8.67.54 mb_strwidth
8.67.55 mb_substitute_character
8.67.56 mb_substr_count
8.67.57 mb_substr
8.68 MCAL
8.68.1 Introduction
8.68.2 Pré-requis
8.68.3 Installation
8.68.4 Configuration à l'exécution
8.68.5 Types de ressources
8.68.6 Constantes pré-définies
8.68.7 mcal_append_event
8.68.8 mcal_close
8.68.9 mcal_create_calendar
8.68.10 mcal_date_compare
8.68.11 mcal_date_valid
8.68.12 mcal_day_of_week
8.68.13 mcal_day_of_year
8.68.14 mcal_days_in_month
8.68.15 mcal_delete_calendar
8.68.16 mcal_delete_event
8.68.17 mcal_event_add_attribute
8.68.18 mcal_event_init
8.68.19 mcal_event_set_alarm
8.68.20 mcal_event_set_category
8.68.21 mcal_event_set_class
8.68.22 mcal_event_set_description
8.68.23 mcal_event_set_end
8.68.24 mcal_event_set_recur_daily
8.68.25 mcal_event_set_recur_monthly_mday
8.68.26 mcal_event_set_recur_monthly_wday
8.68.27 mcal_event_set_recur_none
8.68.28 mcal_event_set_recur_weekly
8.68.29 mcal_event_set_recur_yearly
8.68.30 mcal_event_set_start
8.68.31 mcal_event_set_title
8.68.32 mcal_expunge
8.68.33 mcal_fetch_current_stream_event
8.68.34 mcal_fetch_event
8.68.35 mcal_is_leap_year
8.68.36 mcal_list_alarms
8.68.37 mcal_list_events
8.68.38 mcal_next_recurrence
8.68.39 mcal_open
8.68.40 mcal_popen
8.68.41 mcal_rename_calendar
8.68.42 mcal_reopen
8.68.43 mcal_snooze
8.68.44 mcal_store_event
8.68.45 mcal_time_valid
8.68.46 mcal_week_of_year
8.69 chiffrement mcrypt
8.69.1 Introduction
8.69.2 Pré-requis
8.69.3 Installation
8.69.4 Configuration à l'exécution
8.69.5 Types de ressources
8.69.6 Constantes pré-définies
8.69.7 Mcrypt ciphers
8.69.8 Exemples
8.69.9 mcrypt_cbc
8.69.10 mcrypt_cfb
8.69.11 mcrypt_create_iv
8.69.12 mcrypt_decrypt
8.69.13 mcrypt_ecb
8.69.14 mcrypt_enc_get_algorithms_name
8.69.15 mcrypt_enc_get_block_size
8.69.16 mcrypt_enc_get_iv_size
8.69.17 mcrypt_enc_get_key_size
8.69.18 mcrypt_enc_get_modes_name
8.69.19 mcrypt_enc_get_supported_key_sizes
8.69.20 mcrypt_enc_is_block_algorithm_mode
8.69.21 mcrypt_enc_is_block_algorithm
8.69.22 mcrypt_enc_is_block_mode
8.69.23 mcrypt_enc_self_test
8.69.24 mcrypt_encrypt
8.69.25 mcrypt_generic_deinit
8.69.26 mcrypt_generic_end
8.69.27 mcrypt_generic_init
8.69.28 mcrypt_generic
8.69.29 mcrypt_get_block_size
8.69.30 mcrypt_get_cipher_name
8.69.31 mcrypt_get_iv_size
8.69.32 mcrypt_get_key_size
8.69.33 mcrypt_list_algorithms
8.69.34 mcrypt_list_modes
8.69.35 mcrypt_module_close
8.69.36 mcrypt_module_get_algo_block_size
8.69.37 mcrypt_module_get_algo_key_size
8.69.38 mcrypt_module_get_supported_key_sizes
8.69.39 mcrypt_module_is_block_algorithm_mode
8.69.40 mcrypt_module_is_block_algorithm
8.69.41 mcrypt_module_is_block_mode
8.69.42 mcrypt_module_open
8.69.43 mcrypt_module_self_test
8.69.44 mcrypt_ofb
8.69.45 mdecrypt_generic
8.70 Fonctions de paiement MCVE (Monetra)
8.70.1 Introduction
8.70.2 Installation
8.70.3 Voir aussi
8.70.4 Constantes pré-définies
8.70.5 m_checkstatus
8.70.6 m_completeauthorizations
8.70.7 m_connect
8.70.8 m_connectionerror
8.70.9 m_deletetrans
8.70.10 m_destroyconn
8.70.11 m_destroyengine
8.70.12 m_getcell
8.70.13 m_getcellbynum
8.70.14 m_getcommadelimited
8.70.15 m_getheader
8.70.16 m_initconn
8.70.17 m_initengine
8.70.18 m_iscommadelimited
8.70.19 m_maxconntimeout
8.70.20 m_monitor
8.70.21 m_numcolumns
8.70.22 m_numrows
8.70.23 m_parsecommadelimited
8.70.24 m_responsekeys
8.70.25 m_responseparam
8.70.26 m_returnstatus
8.70.27 m_setblocking
8.70.28 m_setdropfile
8.70.29 m_setip
8.70.30 m_setssl_cafile
8.70.31 m_setssl_files
8.70.32 m_setssl
8.70.33 m_settimeout
8.70.34 m_sslcert_gen_hash
8.70.35 m_transactionssent
8.70.36 m_transinqueue
8.70.37 m_transkeyval
8.70.38 m_transnew
8.70.39 m_transsend
8.70.40 m_uwait
8.70.41 m_validateidentifier
8.70.42 m_verifyconnection
8.70.43 m_verifysslcert
8.71 Fonctions Memcache
8.71.1 Introduction
8.71.2 Pré-requis
8.71.3 Installation
8.71.4 Constantes pré-définies
8.71.4.1 constantmemcache-compressed
8.71.5 Configuration à l'exécution
8.71.6 Types de ressources
8.71.7 Exemples
8.71.8 Memcache::add
8.71.9 Memcache::close
8.71.10 Memcache::connect
8.71.11 memcache_debug
8.71.12 Memcache::decrement
8.71.13 Memcache::delete
8.71.14 Memcache::flush
8.71.15 Memcache::get
8.71.16 Memcache::getStats
8.71.17 Memcache::getVersion
8.71.18 Memcache::increment
8.71.19 Memcache::pconnect
8.71.20 Memcache::replace
8.71.21 Memcache::set
8.72 Hash
8.72.1 Introduction
8.72.2 Pré-requis
8.72.3 Installation
8.72.4 Configuration à l'exécution
8.72.5 Types de ressources
8.72.6 Constantes pré-définies
8.72.7 Exemples
8.72.8 mhash_count
8.72.9 mhash_get_block_size
8.72.10 mhash_get_hash_name
8.72.11 mhash_keygen_s2k
8.72.12 mhash
8.73 Ming pour Flash
8.73.1 Introduction
8.73.2 Pré-requis
8.73.3 Installation
8.73.4 Configuration à l'exécution
8.73.5 Types de ressources
8.73.6 Constantes pré-définies
8.73.7 Classes pré-définies
8.73.8 ming_keypress
8.73.9 ming_setcubicthreshold
8.73.10 ming_setscale
8.73.11 ming_useConstants
8.73.12 ming_useswfversion
8.73.13 SWFAction
8.73.14 SWFBitmap->getHeight
8.73.15 SWFBitmap->getWidth
8.73.16 SWFBitmap
8.73.17 SWFbutton->addAction
8.73.18 SWFButton::addASound
8.73.19 SWFbutton->addShape
8.73.20 SWFbutton->setAction
8.73.21 SWFbutton->setdown
8.73.22 SWFbutton->setHit
8.73.23 SWFButton::setMenu
8.73.24 SWFbutton->setOver
8.73.25 SWFbutton->setUp
8.73.26 SWFbutton
8.73.27 SWFDisplayItem::addAction
8.73.28 SWFDisplayItem->addColor
8.73.29 SWFDisplayItem::endMask
8.73.30 SWFDisplayItem::getRot
8.73.31 SWFDisplayItem::getX
8.73.32 SWFDisplayItem::getXScale
8.73.33 SWFDisplayItem::getXSkew
8.73.34 SWFDisplayItem::getY
8.73.35 SWFDisplayItem::getYScale
8.73.36 SWFDisplayItem::getYSkew
8.73.37 SWFDisplayItem->move
8.73.38 SWFDisplayItem->moveTo
8.73.39 SWFDisplayItem->multColor
8.73.40 SWFDisplayItem->remove
8.73.41 SWFDisplayItem->Rotate
8.73.42 SWFDisplayItem->rotateTo
8.73.43 SWFDisplayItem->scale
8.73.44 SWFDisplayItem->scaleTo
8.73.45 SWFDisplayItem->setDepth
8.73.46 SWFDisplayItem::setMaskLevel
8.73.47 SWFDisplayItem::setMatrix
8.73.48 SWFDisplayItem->setName
8.73.49 SWFDisplayItem->setRatio
8.73.50 SWFDisplayItem->skewX
8.73.51 SWFDisplayItem->skewXTo
8.73.52 SWFDisplayItem->skewY
8.73.53 SWFDisplayItem->skewYTo
8.73.54 SWFFill->moveTo
8.73.55 SWFFill->rotateTo
8.73.56 SWFFill->scaleTo
8.73.57 SWFFill->skewXTo
8.73.58 SWFFill->skewYTo
8.73.59 SWFFill
8.73.60 SWFFont::getAscent
8.73.61 SWFFont::getDescent
8.73.62 SWFFont::getLeading
8.73.63 SWFFont::getShape
8.73.64 SWFFont::getUTF8Width
8.73.65 swffont->getwidth
8.73.66 SWFFont
8.73.67 SWFFontChar::addChars
8.73.68 SWFFontChar::addUTF8Chars
8.73.69 SWFGradient->addEntry
8.73.70 SWFGradient
8.73.71 SWFMorph->getshape1
8.73.72 SWFMorph->getshape2
8.73.73 SWFMorph
8.73.74 SWFMovie->add
8.73.75 SWFMovie::addExport
8.73.76 SWFMovie::addFont
8.73.77 SWFMovie::importChar
8.73.78 SWFMovie::importFont
8.73.79 SWFMovie::labelFrame
8.73.80 SWFMovie->nextframe
8.73.81 SWFMovie->output
8.73.82 swfmovie->remove
8.73.83 SWFMovie->save
8.73.84 SWFMovie::saveToFile
8.73.85 SWFMovie->setbackground
8.73.86 SWFMovie->setdimension
8.73.87 SWFMovie->setframes
8.73.88 SWFMovie->setrate
8.73.89 SWFMovie::startSound
8.73.90 SWFMovie::stopSound
8.73.91 SWFMovie->streammp3
8.73.92 SWFMovie::writeExports
8.73.93 SWFMovie
8.73.94 SWFPrebuiltClip
8.73.95 SWFShape->addFill
8.73.96 SWFShape::drawArc
8.73.97 SWFShape::drawCircle
8.73.98 SWFShape::drawCubic
8.73.99 SWFShape::drawCubicTo
8.73.100 SWFShape->drawCurve
8.73.101 SWFShape->drawCurveTo
8.73.102 SWFShape::drawGlyph
8.73.103 SWFShape->drawLine
8.73.104 SWFShape->drawLineTo
8.73.105 SWFShape->movePen
8.73.106 SWFShape->movePenTo
8.73.107 SWFShape->setLeftFill
8.73.108 SWFShape->setLine
8.73.109 SWFShape->setRightFill
8.73.110 SWFShape
8.73.111 SWFSound
8.73.112 SWFSoundInstance::loopCount
8.73.113 SWFSoundInstance::loopInPoint
8.73.114 SWFSoundInstance::loopOutPoint
8.73.115 SWFSoundInstance::noMultiple
8.73.116 swfsprite->add
8.73.117 SWFSprite::labelFrame
8.73.118 SWFSprite->nextframe
8.73.119 SWFSprite->remove
8.73.120 SWFSprite->setframes
8.73.121 SWFSprite::startSound
8.73.122 SWFSprite::stopSound
8.73.123 SWFSprite
8.73.124 SWFText->addString
8.73.125 SWFText::addUTF8String
8.73.126 SWFText::getAscent
8.73.127 SWFText::getDescent
8.73.128 SWFText::getLeading
8.73.129 SWFText::getUTF8Width
8.73.130 SWFText->getWidth
8.73.131 SWFText->moveTo
8.73.132 SWFText->setColor
8.73.133 SWFText->setFont
8.73.134 SWFText->setHeight
8.73.135 SWFText->setSpacing
8.73.136 SWFText
8.73.137 SWFTextField::addChars
8.73.138 SWFTextField->addstring
8.73.139 SWFTextField->align
8.73.140 SWFTextField->setbounds
8.73.141 SWFTextField->setcolor
8.73.142 SWFTextField->setFont
8.73.143 SWFTextField->setHeight
8.73.144 SWFTextField->setindentation
8.73.145 SWFTextField->setLeftMargin
8.73.146 SWFTextField->setLineSpacing
8.73.147 SWFTextField->setMargins
8.73.148 SWFTextField->setname
8.73.149 SWFTextField::setPadding
8.73.150 SWFTextField->setrightMargin
8.73.151 SWFTextField
8.73.152 SWFVideoStream::getNumFrames
8.73.153 SWFVideoStream::setDimension
8.73.154 SWFVideoStream
8.74 Fonctions diverses
8.74.1 Introduction
8.74.2 Pré-requis
8.74.3 Installation
8.74.4 Configuration à l'exécution
8.74.4.1 ignore_user_abort
8.74.4.2 highlight.bg
8.74.4.3 browscap
8.74.5 Types de ressources
8.74.6 Constantes pré-définies
8.74.7 connection_aborted
8.74.8 connection_status
8.74.9 connection_timeout
8.74.10 constant
8.74.11 define
8.74.12 defined
8.74.13 die
8.74.14 eval
8.74.15 exit
8.74.16 get_browser
8.74.17 __halt_compiler
8.74.18 highlight_file
8.74.19 highlight_string
8.74.20 ignore_user_abort
8.74.21 pack
8.74.22 php_check_syntax
8.74.23 php_strip_whitespace
8.74.24 show_source
8.74.25 sleep
8.74.26 time_nanosleep
8.74.27 time_sleep_until
8.74.28 uniqid
8.74.29 unpack
8.74.30 usleep
8.75 mnoGoSearch
8.75.1 Introduction
8.75.2 Pré-requis
8.75.3 Installation
8.75.4 Configuration à l'exécution
8.75.5 Types de ressources
8.75.6 Constantes pré-définies
8.75.7 udm_add_search_limit
8.75.8 udm_alloc_agent_array
8.75.9 udm_alloc_agent
8.75.10 udm_api_version
8.75.11 udm_cat_list
8.75.12 udm_cat_path
8.75.13 udm_check_charset
8.75.14 udm_check_stored
8.75.15 udm_clear_search_limits
8.75.16 udm_close_stored
8.75.17 udm_crc32
8.75.18 udm_errno
8.75.19 udm_error
8.75.20 udm_find
8.75.21 udm_free_agent
8.75.22 udm_free_ispell_data
8.75.23 udm_free_res
8.75.24 udm_get_doc_count
8.75.25 udm_get_res_field
8.75.26 udm_get_res_param
8.75.27 udm_hash32
8.75.28 udm_load_ispell_data
8.75.29 udm_open_stored
8.75.30 udm_set_agent_param
8.76 Sessions Mohawk
8.76.1 Introduction
8.76.2 Pré-requis
8.76.3 Installation
8.76.4 Configuration à l'exécution
8.76.5 Types de ressources
8.76.6 Constantes pré-définies
8.76.7 msession_connect
8.76.8 msession_count
8.76.9 msession_create
8.76.10 msession_destroy
8.76.11 msession_disconnect
8.76.12 msession_find
8.76.13 msession_get_array
8.76.14 msession_get_data
8.76.15 msession_get
8.76.16 msession_inc
8.76.17 msession_list
8.76.18 msession_listvar
8.76.19 msession_lock
8.76.20 msession_plugin
8.76.21 msession_randstr
8.76.22 msession_set_array
8.76.23 msession_set_data
8.76.24 msession_set
8.76.25 msession_timeout
8.76.26 msession_uniq
8.76.27 msession_unlock
8.77 mSQL
8.77.1 Introduction
8.77.2 Installation
8.77.3 Configuration à l'exécution
8.77.3.1 msql.allow_persistent
8.77.3.2 msql.max_persistent
8.77.3.3 msql.max_links
8.77.4 Types de ressources
8.77.5 Constantes pré-définies
8.77.6 Exemples
8.77.7 msql_affected_rows
8.77.8 msql_close
8.77.9 msql_connect
8.77.10 msql_create_db
8.77.11 msql_createdb
8.77.12 msql_data_seek
8.77.13 msql_db_query
8.77.14 msql_dbname
8.77.15 msql_drop_db
8.77.16 msql_error
8.77.17 msql_fetch_array
8.77.18 msql_fetch_field
8.77.19 msql_fetch_object
8.77.20 msql_fetch_row
8.77.21 msql_field_flags
8.77.22 msql_field_len
8.77.23 msql_field_name
8.77.24 msql_field_seek
8.77.25 msql_field_table
8.77.26 msql_field_type
8.77.27 msql_fieldflags
8.77.28 msql_fieldlen
8.77.29 msql_fieldname
8.77.30 msql_fieldtable
8.77.31 msql_fieldtype
8.77.32 msql_free_result
8.77.33 msql_list_dbs
8.77.34 msql_list_fields
8.77.35 msql_list_tables
8.77.36 msql_num_fields
8.77.37 msql_num_rows
8.77.38 msql_numfields
8.77.39 msql_numrows
8.77.40 msql_pconnect
8.77.41 msql_query
8.77.42 msql_regcase
8.77.43 msql_result
8.77.44 msql_select_db
8.77.45 msql_tablename
8.77.46 msql
8.78 Microsoft SQL Server
8.78.1 Introduction
8.78.2 Pré-requis
8.78.3 Installation
8.78.4 Configuration à l'exécution
8.78.5 Types de ressources
8.78.6 Constantes pré-définies
8.78.7 mssql_bind
8.78.8 mssql_close
8.78.9 mssql_connect
8.78.10 mssql_data_seek
8.78.11 mssql_execute
8.78.12 mssql_fetch_array
8.78.13 mssql_fetch_assoc
8.78.14 mssql_fetch_batch
8.78.15 mssql_fetch_field
8.78.16 mssql_fetch_object
8.78.17 mssql_fetch_row
8.78.18 mssql_field_length
8.78.19 mssql_field_name
8.78.20 mssql_field_seek
8.78.21 mssql_field_type
8.78.22 mssql_free_result
8.78.23 mssql_free_statement
8.78.24 mssql_get_last_message
8.78.25 mssql_guid_string
8.78.26 mssql_init
8.78.27 mssql_min_error_severity
8.78.28 mssql_min_message_severity
8.78.29 mssql_next_result
8.78.30 mssql_num_fields
8.78.31 mssql_num_rows
8.78.32 mssql_pconnect
8.78.33 mssql_query
8.78.34 mssql_result
8.78.35 mssql_rows_affected
8.78.36 mssql_select_db
8.79 Fonctions Muscat
8.79.1 Introduction
8.79.2 Installation
8.79.2.1 muscat.configure
8.79.3 muscat_close
8.79.4 muscat_get
8.79.5 muscat_give
8.79.6 muscat_setup_net
8.79.7 muscat_setup
8.80 MySQL
8.80.1 Introduction
8.80.2 Pré-requis
8.80.3 Installation
8.80.3.1 mysql.configure
8.80.3.2 Installation sur les systèmes Linux
8.80.3.3 Installation sur les systèmes Windows
8.80.3.4 Notes sur l'installation de MySQL
8.80.4 Configuration à l'exécution
8.80.4.1 mysql.allow_persistent
8.80.4.2 mysql.max_persistent
8.80.4.3 mysql.max_links
8.80.4.4 mysql.trace_mode
8.80.4.5 mysql.default_port
8.80.4.6 mysql.default_socket
8.80.4.7 mysql.default_host
8.80.4.8 mysql.default_user
8.80.4.9 mysql.default_password
8.80.4.10 mysql.connect_timeout
8.80.5 Types de ressources
8.80.6 Constantes pré-définies
8.80.6.1 Constantes client MySQL
8.80.7 Notes
8.80.8 Exemples
8.80.9 mysql_affected_rows
8.80.10 mysql_change_user
8.80.11 mysql_client_encoding
8.80.12 mysql_close
8.80.13 mysql_connect
8.80.14 mysql_create_db
8.80.15 mysql_data_seek
8.80.16 mysql_db_name
8.80.17 mysql_db_query
8.80.18 mysql_drop_db
8.80.19 mysql_errno
8.80.20 mysql_error
8.80.21 mysql_escape_string
8.80.22 mysql_fetch_array
8.80.23 mysql_fetch_assoc
8.80.24 mysql_fetch_field
8.80.25 mysql_fetch_lengths
8.80.26 mysql_fetch_object
8.80.27 mysql_fetch_row
8.80.28 mysql_field_flags
8.80.29 mysql_field_len
8.80.30 mysql_field_name
8.80.31 mysql_field_seek
8.80.32 mysql_field_table
8.80.33 mysql_field_type
8.80.34 mysql_free_result
8.80.35 mysql_get_client_info
8.80.36 mysql_get_host_info
8.80.37 mysql_get_proto_info
8.80.38 mysql_get_server_info
8.80.39 mysql_info
8.80.40 mysql_insert_id
8.80.41 mysql_list_dbs
8.80.42 mysql_list_fields
8.80.43 mysql_list_processes
8.80.44 mysql_list_tables
8.80.45 mysql_num_fields
8.80.46 mysql_num_rows
8.80.47 mysql_pconnect
8.80.48 mysql_ping
8.80.49 mysql_query
8.80.50 mysql_real_escape_string
8.80.51 mysql_result
8.80.52 mysql_select_db
8.80.53 mysql_stat
8.80.54 mysql_tablename
8.80.55 mysql_thread_id
8.80.56 mysql_unbuffered_query
8.81 Extension MySQL améliorée
8.81.1 Introduction
8.81.2 Pré-requis
8.81.3 Installation
8.81.3.1 mysqli.configure
8.81.4 Configuration à l'exécution
8.81.4.1 mysqli.max_links
8.81.4.2 mysqli.default_port
8.81.4.3 mysqli.default_socket
8.81.4.4 mysqli.default_host
8.81.4.5 mysqli.default_user
8.81.4.6 mysqli.default_pw
8.81.5 Classes pré-définies
8.81.5.1 mysqli
8.81.5.1.1 Constructeur
8.81.5.1.2 Méthodes
8.81.5.1.3 Propriétés
8.81.5.2 mysqli_stmt
8.81.5.2.1 Méthodes
8.81.5.2.2 Propriétés
8.81.5.3 mysqli_result
8.81.5.3.1 Méthodes
8.81.5.3.2 Propriétés
8.81.6 Constantes pré-définies
8.81.6.1 constantmysqli-read-default-group
8.81.6.2 constantmysqli-read-default-file
8.81.6.3 constantmysqli-opt-connect-timeout
8.81.6.4 constantmysqli-opt-local-infile
8.81.6.5 constantmysqli-init-command
8.81.6.6 constantmysqli-client-ssl
8.81.6.7 constantmysqli-client-compress
8.81.6.8 constantmysqli-client-interactive
8.81.6.9 constantmysqli-client-ignore-space
8.81.6.10 constantmysqli-client-no-schema
8.81.6.11 constantmysqli-client-multi-queries
8.81.6.12 constantmysqli-store-result
8.81.6.13 constantmysqli-use-result
8.81.6.14 constantmysqli-assoc
8.81.6.15 constantmysqli-num
8.81.6.16 constantmysqli-both
8.81.6.17 constantmysqli-not-null-flag
8.81.6.18 constantmysqli-pri-key-flag
8.81.6.19 constantmysqli-unique-key-flag
8.81.6.20 constantmysqli-multiple-key-flag
8.81.6.21 constantmysqli-blob-flag
8.81.6.22 constantmysqli-unsigned-flag
8.81.6.23 constantmysqli-zerofill-flag
8.81.6.24 constantmysqli-auto-increment-flag
8.81.6.25 constantmysqli-timestamp-flag
8.81.6.26 constantmysqli-set-flag
8.81.6.27 constantmysqli-num-flag
8.81.6.28 constantmysqli-part-key-flag
8.81.6.29 constantmysqli-group-flag
8.81.6.30 constantmysqli-type-decimal
8.81.6.31 constantmysqli-type-tiny
8.81.6.32 constantmysqli-type-short
8.81.6.33 constantmysqli-type-long
8.81.6.34 constantmysqli-type-fload
8.81.6.35 constantmysqli-type-double
8.81.6.36 constantmysqli-type-null
8.81.6.37 constantmysqli-type-timestamp
8.81.6.38 constantmysqli-type-longlong
8.81.6.39 constantmysqli-type-int24
8.81.6.40 constantmysqli-type-date
8.81.6.41 constantmysqli-type-time
8.81.6.42 constantmysqli-type-datetime
8.81.6.43 constantmysqli-type-year
8.81.6.44 constantmysqli-type-newdate
8.81.6.45 constantmysqli-type-enum
8.81.6.46 constantmysqli-type-set
8.81.6.47 constantmysqli-type-tiny-blob
8.81.6.48 constantmysqli-type-medium-blob
8.81.6.49 constantmysqli-type-long-blob
8.81.6.50 constantmysqli-type-blob
8.81.6.51 constantmysqli-type-string
8.81.6.52 constantmysqli-type-char
8.81.6.53 constantmysqli-type-geometry
8.81.6.54 constantmysqli-need-data
8.81.6.55 constantmysqli-no-data
8.81.6.56 constantmysqli-data-truncated
8.81.7 mysqli_affected_rows
8.81.8 mysqli_autocommit
8.81.9 mysqli_bind_param
8.81.10 mysqli_bind_result
8.81.11 mysqli_change_user
8.81.12 mysqli_character_set_name
8.81.13 mysqli_client_encoding
8.81.14 mysqli_close
8.81.15 mysqli_commit
8.81.16 mysqli_connect_errno
8.81.17 mysqli_connect_error
8.81.18 mysqli_connect
8.81.19 mysqli_data_seek
8.81.20 mysqli_debug
8.81.21 mysqli_disable_reads_from_master
8.81.22 mysqli_disable_rpl_parse
8.81.23 mysqli_dump_debug_info
8.81.24 mysqli_embedded_connect
8.81.25 mysqli_enable_reads_from_master
8.81.26 mysqli_enable_rpl_parse
8.81.27 mysqli_errno
8.81.28 mysqli_error
8.81.29 mysqli_escape_string
8.81.30 mysqli_execute
8.81.31 mysqli_fetch_array
8.81.32 mysqli_fetch_assoc
8.81.33 mysqli_fetch_field_direct
8.81.34 mysqli_fetch_field
8.81.35 mysqli_fetch_fields
8.81.36 mysqli_fetch_lengths
8.81.37 mysqli_fetch_object
8.81.38 mysqli_fetch_row
8.81.39 mysqli_fetch
8.81.40 mysqli_field_count
8.81.41 mysqli_field_seek
8.81.42 mysqli_field_tell
8.81.43 mysqli_free_result
8.81.44 mysqli_get_client_info
8.81.45 mysqli_get_client_version
8.81.46 mysqli_get_host_info
8.81.47 mysqli_get_metadata
8.81.48 mysqli_get_proto_info
8.81.49 mysqli_get_server_info
8.81.50 mysqli_get_server_version
8.81.51 mysqli_info
8.81.52 mysqli_init
8.81.53 mysqli_insert_id
8.81.54 mysqli_kill
8.81.55 mysqli_master_query
8.81.56 mysqli_more_results
8.81.57 mysqli_multi_query
8.81.58 mysqli_next_result
8.81.59 mysqli_num_fields
8.81.60 mysqli_num_rows
8.81.61 mysqli_options
8.81.62 mysqli_param_count
8.81.63 mysqli_ping
8.81.64 mysqli_prepare
8.81.65 mysqli_query
8.81.66 mysqli_real_connect
8.81.67 mysqli_real_escape_string
8.81.68 mysqli_real_query
8.81.69 mysqli_report
8.81.70 mysqli_rollback
8.81.71 mysqli_rpl_parse_enabled
8.81.72 mysqli_rpl_probe
8.81.73 mysqli_rpl_query_type
8.81.74 mysqli_select_db
8.81.75 mysqli_send_long_data
8.81.76 mysqli_send_query
8.81.77 mysqli_server_end
8.81.78 mysqli_server_init
8.81.79 mysqli_set_charset
8.81.80 mysqli_set_opt
8.81.81 mysqli_sqlstate
8.81.82 mysqli_ssl_set
8.81.83 mysqli_stat
8.81.84 mysqli_stmt_affected_rows
8.81.85 mysqli_stmt_bind_param
8.81.86 mysqli_stmt_bind_result
8.81.87 mysqli_stmt_close
8.81.88 mysqli_stmt_data_seek
8.81.89 mysqli_stmt_errno
8.81.90 mysqli_stmt_error
8.81.91 mysqli_stmt_execute
8.81.92 mysqli_stmt_fetch
8.81.93 mysqli_stmt_free_result
8.81.94 mysqli_stmt_init
8.81.95 mysqli_stmt_num_rows
8.81.96 mysqli_stmt_param_count
8.81.97 mysqli_stmt_prepare
8.81.98 mysqli_stmt_reset
8.81.99 mysqli_stmt_result_metadata
8.81.100 mysqli_stmt_send_long_data
8.81.101 mysqli_stmt_sqlstate
8.81.102 mysqli_stmt_store_result
8.81.103 mysqli_store_result
8.81.104 mysqli_thread_id
8.81.105 mysqli_thread_safe
8.81.106 mysqli_use_result
8.81.107 mysqli_warning_count
8.82 Fonctions de contrôle d'écran de terminal
8.82.1 Introduction
8.82.2 Pré-requis
8.82.3 Installation
8.82.4 Configuration à l'exécution
8.82.5 Types de ressources
8.82.6 Constantes pré-définies
8.82.6.1 Codes d'erreurs
8.82.6.2 Colors
8.82.6.3 Touches
8.82.7 ncurses_addch
8.82.8 ncurses_addchnstr
8.82.9 ncurses_addchstr
8.82.10 ncurses_addnstr
8.82.11 ncurses_addstr
8.82.12 ncurses_assume_default_colors
8.82.13 ncurses_attroff
8.82.14 ncurses_attron
8.82.15 ncurses_attrset
8.82.16 ncurses_baudrate
8.82.17 ncurses_beep
8.82.18 ncurses_bkgd
8.82.19 ncurses_bkgdset
8.82.20 ncurses_border
8.82.21 ncurses_bottom_panel
8.82.22 ncurses_can_change_color
8.82.23 ncurses_cbreak
8.82.24 ncurses_clear
8.82.25 ncurses_clrtobot
8.82.26 ncurses_clrtoeol
8.82.27 ncurses_color_content
8.82.28 ncurses_color_set
8.82.29 ncurses_curs_set
8.82.30 ncurses_def_prog_mode
8.82.31 ncurses_def_shell_mode
8.82.32 ncurses_define_key
8.82.33 ncurses_del_panel
8.82.34 ncurses_delay_output
8.82.35 ncurses_delch
8.82.36 ncurses_deleteln
8.82.37 ncurses_delwin
8.82.38 ncurses_doupdate
8.82.39 ncurses_echo
8.82.40 ncurses_echochar
8.82.41 ncurses_end
8.82.42 ncurses_erase
8.82.43 ncurses_erasechar
8.82.44 ncurses_filter
8.82.45 ncurses_flash
8.82.46 ncurses_flushinp
8.82.47 ncurses_getch
8.82.48 ncurses_getmaxyx
8.82.49 ncurses_getmouse
8.82.50 ncurses_getyx
8.82.51 ncurses_halfdelay
8.82.52 ncurses_has_colors
8.82.53 ncurses_has_ic
8.82.54 ncurses_has_il
8.82.55 ncurses_has_key
8.82.56 ncurses_hide_panel
8.82.57 ncurses_hline
8.82.58 ncurses_inch
8.82.59 ncurses_init_color
8.82.60 ncurses_init_pair
8.82.61 ncurses_init
8.82.62 ncurses_insch
8.82.63 ncurses_insdelln
8.82.64 ncurses_insertln
8.82.65 ncurses_insstr
8.82.66 ncurses_instr
8.82.67 ncurses_isendwin
8.82.68 ncurses_keyok
8.82.69 ncurses_keypad
8.82.70 ncurses_killchar
8.82.71 ncurses_longname
8.82.72 ncurses_meta
8.82.73 ncurses_mouse_trafo
8.82.74 ncurses_mouseinterval
8.82.75 ncurses_mousemask
8.82.76 ncurses_move_panel
8.82.77 ncurses_move
8.82.78 ncurses_mvaddch
8.82.79 ncurses_mvaddchnstr
8.82.80 ncurses_mvaddchstr
8.82.81 ncurses_mvaddnstr
8.82.82 ncurses_mvaddstr
8.82.83 ncurses_mvcur
8.82.84 ncurses_mvdelch
8.82.85 ncurses_mvgetch
8.82.86 ncurses_mvhline
8.82.87 ncurses_mvinch
8.82.88 ncurses_mvvline
8.82.89 ncurses_mvwaddstr
8.82.90 ncurses_napms
8.82.91 ncurses_new_panel
8.82.92 ncurses_newpad
8.82.93 ncurses_newwin
8.82.94 ncurses_nl
8.82.95 ncurses_nocbreak
8.82.96 ncurses_noecho
8.82.97 ncurses_nonl
8.82.98 ncurses_noqiflush
8.82.99 ncurses_noraw
8.82.100 ncurses_pair_content
8.82.101 ncurses_panel_above
8.82.102 ncurses_panel_below
8.82.103 ncurses_panel_window
8.82.104 ncurses_pnoutrefresh
8.82.105 ncurses_prefresh
8.82.106 ncurses_putp
8.82.107 ncurses_qiflush
8.82.108 ncurses_raw
8.82.109 ncurses_refresh
8.82.110 ncurses_replace_panel
8.82.111 ncurses_reset_prog_mode
8.82.112 ncurses_reset_shell_mode
8.82.113 ncurses_resetty
8.82.114 ncurses_savetty
8.82.115 ncurses_scr_dump
8.82.116 ncurses_scr_init
8.82.117 ncurses_scr_restore
8.82.118 ncurses_scr_set
8.82.119 ncurses_scrl
8.82.120 ncurses_show_panel
8.82.121 ncurses_slk_attr
8.82.122 ncurses_slk_attroff
8.82.123 ncurses_slk_attron
8.82.124 ncurses_slk_attrset
8.82.125 ncurses_slk_clear
8.82.126 ncurses_slk_color
8.82.127 ncurses_slk_init
8.82.128 ncurses_slk_noutrefresh
8.82.129 ncurses_slk_refresh
8.82.130 ncurses_slk_restore
8.82.131 ncurses_slk_set
8.82.132 ncurses_slk_touch
8.82.133 ncurses_standend
8.82.134 ncurses_standout
8.82.135 ncurses_start_color
8.82.136 ncurses_termattrs
8.82.137 ncurses_termname
8.82.138 ncurses_timeout
8.82.139 ncurses_top_panel
8.82.140 ncurses_typeahead
8.82.141 ncurses_ungetch
8.82.142 ncurses_ungetmouse
8.82.143 ncurses_update_panels
8.82.144 ncurses_use_default_colors
8.82.145 ncurses_use_env
8.82.146 ncurses_use_extended_names
8.82.147 ncurses_vidattr
8.82.148 ncurses_vline
8.82.149 ncurses_waddch
8.82.150 ncurses_waddstr
8.82.151 ncurses_wattroff
8.82.152 ncurses_wattron
8.82.153 ncurses_wattrset
8.82.154 ncurses_wborder
8.82.155 ncurses_wclear
8.82.156 ncurses_wcolor_set
8.82.157 ncurses_werase
8.82.158 ncurses_wgetch
8.82.159 ncurses_whline
8.82.160 ncurses_wmouse_trafo
8.82.161 ncurses_wmove
8.82.162 ncurses_wnoutrefresh
8.82.163 ncurses_wrefresh
8.82.164 ncurses_wstandend
8.82.165 ncurses_wstandout
8.82.166 ncurses_wvline
8.83 Réseau
8.83.1 Introduction
8.83.2 Pré-requis
8.83.3 Installation
8.83.4 Configuration à l'exécution
8.83.4.1 define_syslog_variables
8.83.5 Types de ressources
8.83.6 Constantes pré-définies
8.83.7 checkdnsrr
8.83.8 closelog
8.83.9 debugger_off
8.83.10 debugger_on
8.83.11 define_syslog_variables
8.83.12 dns_check_record
8.83.13 dns_get_mx
8.83.14 dns_get_record
8.83.15 fsockopen
8.83.16 gethostbyaddr
8.83.17 gethostbyname
8.83.18 gethostbynamel
8.83.19 getmxrr
8.83.20 getprotobyname
8.83.21 getprotobynumber
8.83.22 getservbyname
8.83.23 getservbyport
8.83.24 inet_ntop
8.83.25 inet_pton
8.83.26 ip2long
8.83.27 long2ip
8.83.28 openlog
8.83.29 pfsockopen
8.83.30 socket_get_status
8.83.31 socket_set_blocking
8.83.32 socket_set_timeout
8.83.33 syslog
8.84 NIS
8.84.1 Introduction
8.84.2 Pré-requis
8.84.3 Installation
8.84.4 Configuration à l'exécution
8.84.5 Constantes pré-définies
8.84.6 yp_all
8.84.7 yp_cat
8.84.8 yp_err_string
8.84.9 yp_errno
8.84.10 yp_first
8.84.11 yp_get_default_domain
8.84.12 yp_master
8.84.13 yp_match
8.84.14 yp_next
8.84.15 yp_order
8.85 Lotus Notes
8.85.1 Introduction
8.85.2 notes_body
8.85.3 notes_copy_db
8.85.4 notes_create_db
8.85.5 notes_create_note
8.85.6 notes_drop_db
8.85.7 notes_find_note
8.85.8 notes_header_info
8.85.9 notes_list_msgs
8.85.10 notes_mark_read
8.85.11 notes_mark_unread
8.85.12 notes_nav_create
8.85.13 notes_search
8.85.14 notes_unread
8.85.15 notes_version
8.86 Netscape Server API
8.86.1 Introduction
8.86.2 Installation
8.86.3 Configuration à l'exécution
8.86.3.1 nsapi.read_timeout
8.86.4 Types de ressources
8.86.5 Constantes pré-définies
8.86.6 Voir aussi
8.86.7 nsapi_request_headers
8.86.8 nsapi_response_headers
8.86.9 nsapi_virtual
8.87 agrégation d'objets/Composition de fonctions
8.87.1 Introduction
8.87.2 Exemples
8.87.3 aggregate_info
8.87.4 aggregate_methods_by_list
8.87.5 aggregate_methods_by_regexp
8.87.6 aggregate_methods
8.87.7 aggregate_properties_by_list
8.87.8 aggregate_properties_by_regexp
8.87.9 aggregate_properties
8.87.10 aggregate
8.87.11 aggregation_info
8.87.12 deaggregate
8.88 Fonctions Oracle
8.88.1 Introduction
8.88.2 Pré-requis
8.88.3 Configuration à l'exécution
8.88.3.1 oci8.privileged_connect
8.88.3.2 oci8.max_persistent
8.88.3.3 oci8.persistent_timeout
8.88.3.4 oci8.ping_interval
8.88.3.5 oci8.statement_cache_size
8.88.3.6 oci8.default_prefetch
8.88.3.7 oci8.old_oci_close_semantics
8.88.4 Constantes pré-définies
8.88.5 Exemples
8.88.6 Gestion de la connexion
8.88.7 Types de données supportées par le driver
8.88.8 oci_bind_by_name
8.88.9 oci_cancel
8.88.10 oci_close
8.88.11 OCI-Collection->append
8.88.12 OCI-Collection->assign
8.88.13 OCI-Collection->assignElem
8.88.14 OCI-Collection->free
8.88.15 OCI-Collection->getElem
8.88.16 OCI-Collection->max
8.88.17 OCI-Collection->size
8.88.18 OCI-Collection->trim
8.88.19 oci_commit
8.88.20 oci_connect
8.88.21 oci_define_by_name
8.88.22 oci_error
8.88.23 oci_execute
8.88.24 oci_fetch_all
8.88.25 oci_fetch_array
8.88.26 oci_fetch_assoc
8.88.27 oci_fetch_object
8.88.28 oci_fetch_row
8.88.29 oci_fetch
8.88.30 oci_field_is_null
8.88.31 oci_field_name
8.88.32 oci_field_precision
8.88.33 oci_field_scale
8.88.34 oci_field_size
8.88.35 oci_field_type_raw
8.88.36 oci_field_type
8.88.37 oci_free_statement
8.88.38 oci_internal_debug
8.88.39 OCI-Lob->append
8.88.40 OCI-Lob->close
8.88.41 oci_lob_copy
8.88.42 OCI-Lob->eof
8.88.43 OCI-Lob->erase
8.88.44 OCI-Lob->export
8.88.45 OCI-Lob->flush
8.88.46 OCI-Lob->free
8.88.47 OCI-Lob->getBuffering
8.88.48 OCI-Lob->import
8.88.49 oci_lob_is_equal
8.88.50 OCI-Lob->load
8.88.51 OCI-Lob->read
8.88.52 OCI-Lob->rewind
8.88.53 OCI-Lob->save
8.88.54 OCI-Lob->saveFile
8.88.55 OCI-Lob->seek
8.88.56 OCI-Lob->setBuffering
8.88.57 OCI-Lob->size
8.88.58 OCI-Lob->tell
8.88.59 OCI-Lob->truncate
8.88.60 OCI-Lob->write
8.88.61 OCI-Lob->writeTemporary
8.88.62 OCI-Lob->writeToFile
8.88.63 oci_new_collection
8.88.64 oci_new_connect
8.88.65 oci_new_cursor
8.88.66 oci_new_descriptor
8.88.67 oci_num_fields
8.88.68 oci_num_rows
8.88.69 oci_parse
8.88.70 oci_password_change
8.88.71 oci_pconnect
8.88.72 oci_result
8.88.73 oci_rollback
8.88.74 oci_server_version
8.88.75 oci_set_prefetch
8.88.76 oci_statement_type
8.88.77 ocibindbyname
8.88.78 ocicancel
8.88.79 ocicloselob
8.88.80 ocicollappend
8.88.81 ocicollassign
8.88.82 ocicollassignelem
8.88.83 ocicollgetelem
8.88.84 ocicollmax
8.88.85 ocicollsize
8.88.86 ocicolltrim
8.88.87 ocicolumnisnull
8.88.88 ocicolumnname
8.88.89 ocicolumnprecision
8.88.90 ocicolumnscale
8.88.91 ocicolumnsize
8.88.92 ocicolumntype
8.88.93 ocicolumntyperaw
8.88.94 ocicommit
8.88.95 ocidefinebyname
8.88.96 ocierror
8.88.97 ociexecute
8.88.98 ocifetch
8.88.99 ocifetchinto
8.88.100 ocifetchistatement
8.88.101 ocifreecollection
8.88.102 ocifreecursor
8.88.103 ocifreedesc
8.88.104 ocifreestatement
8.88.105 ociinternaldebug
8.88.106 ociloadlob
8.88.107 ocilogoff
8.88.108 ocilogon
8.88.109 ocinewcollection
8.88.110 ocinewcursor
8.88.111 ocinewscriptor
8.88.112 ocinlogon
8.88.113 ocinumcols
8.88.114 ociparse
8.88.115 ociplogon
8.88.116 ociresult
8.88.117 ocirollback
8.88.118 ocirowcount
8.88.119 ocisavelob
8.88.120 ocisavelobfile
8.88.121 ociserverversion
8.88.122 ocisetprefetch
8.88.123 ocistatementtype
8.88.124 ociwritelobtofile
8.88.125 ociwritetemporarylob
8.89 oggvorbis
8.89.1 Introduction
8.89.2 Pré-requis
8.89.3 Configuration à l'exécution
8.89.4 Installation
8.89.5 Options de contexte
8.89.6 Constantes pré-définies
8.90 Gestion Audio OpenAL
8.90.1 Introduction
8.90.2 Installation
8.90.3 Configuration à l'exécution
8.90.4 Types de ressources
8.90.5 Constantes pré-définies
8.90.6 openal_buffer_create
8.90.7 openal_buffer_data
8.90.8 openal_buffer_destroy
8.90.9 openal_buffer_get
8.90.10 openal_buffer_loadwav
8.90.11 openal_context_create
8.90.12 openal_context_current
8.90.13 openal_context_destroy
8.90.14 openal_context_process
8.90.15 openal_context_suspend
8.90.16 openal_device_close
8.90.17 openal_device_open
8.90.18 openal_listener_get
8.90.19 openal_listener_set
8.90.20 openal_source_create
8.90.21 openal_source_destroy
8.90.22 openal_source_get
8.90.23 openal_source_pause
8.90.24 openal_source_play
8.90.25 openal_source_rewind
8.90.26 openal_source_set
8.90.27 openal_source_stop
8.90.28 openal_stream
8.91 OpenSSL
8.91.1 Introduction
8.91.2 Pré-requis
8.91.3 Installation
8.91.4 Configuration à l'exécution
8.91.5 Types de ressources
8.91.6 Paramètres clés/certificats
8.91.7 Vérification de certificats
8.91.8 Constantes pré-définies
8.91.8.1 Options de validations générales
8.91.8.2 Options de remplissage ( Padding )
8.91.8.3 Types de clés
8.91.8.4 Constantes/options PKCS7
8.91.9 openssl_csr_export_to_file
8.91.10 openssl_csr_export
8.91.11 openssl_csr_new
8.91.12 openssl_csr_sign
8.91.13 openssl_error_string
8.91.14 openssl_free_key
8.91.15 openssl_get_privatekey
8.91.16 openssl_get_publickey
8.91.17 openssl_open
8.91.18 openssl_pkcs7_decrypt
8.91.19 openssl_pkcs7_encrypt
8.91.20 openssl_pkcs7_sign
8.91.21 openssl_pkcs7_verify
8.91.22 openssl_pkey_export_to_file
8.91.23 openssl_pkey_export
8.91.24 openssl_pkey_free
8.91.25 openssl_pkey_get_private
8.91.26 openssl_pkey_get_public
8.91.27 openssl_pkey_new
8.91.28 openssl_private_decrypt
8.91.29 openssl_private_encrypt
8.91.30 openssl_public_decrypt
8.91.31 openssl_public_encrypt
8.91.32 openssl_seal
8.91.33 openssl_sign
8.91.34 openssl_verify
8.91.35 openssl_x509_check_private_key
8.91.36 openssl_x509_checkpurpose
8.91.37 openssl_x509_export_to_file
8.91.38 openssl_x509_export
8.91.39 openssl_x509_free
8.91.40 openssl_x509_parse
8.91.41 openssl_x509_read
8.92 Oracle [obsolète]
8.92.1 Introduction
8.92.2 Installation
8.92.3 Constantes pré-définies
8.92.4 ora_bind
8.92.5 ora_close
8.92.6 ora_columnname
8.92.7 ora_columnsize
8.92.8 ora_columntype
8.92.9 ora_commit
8.92.10 ora_commitoff
8.92.11 ora_commiton
8.92.12 ora_do
8.92.13 ora_error
8.92.14 ora_errorcode
8.92.15 ora_exec
8.92.16 ora_fetch_into
8.92.17 ora_fetch
8.92.18 ora_getcolumn
8.92.19 ora_logoff
8.92.20 ora_logon
8.92.21 ora_numcols
8.92.22 ora_numrows
8.92.23 ora_open
8.92.24 ora_parse
8.92.25 ora_plogon
8.92.26 ora_rollback
8.93 Bufferisation de sortie
8.93.1 Introduction
8.93.2 Pré-requis
8.93.3 Installation
8.93.4 Configuration à l'exécution
8.93.4.1 output_buffering
8.93.4.2 output_handler
8.93.4.3 implicit_flush
8.93.5 Types de ressources
8.93.6 Constantes pré-définies
8.93.7 Exemples
8.93.8 Voir aussi
8.93.9 flush
8.93.10 ob_clean
8.93.11 ob_end_clean
8.93.12 ob_end_flush
8.93.13 ob_flush
8.93.14 ob_get_clean
8.93.15 ob_get_contents
8.93.16 ob_get_flush
8.93.17 ob_get_length
8.93.18 ob_get_level
8.93.19 ob_get_status
8.93.20 ob_gzhandler
8.93.21 ob_implicit_flush
8.93.22 ob_list_handlers
8.93.23 ob_start
8.93.24 output_add_rewrite_var
8.93.25 output_reset_rewrite_vars
8.94 Overload
8.94.1 Introduction
8.94.2 Pré-requis
8.94.3 Installation
8.94.4 Configuration à l'exécution
8.94.5 Types de ressources
8.94.6 Constantes pré-définies
8.94.7 Exemples
8.94.8 overload
8.95 Ovrimos SQL
8.95.1 Introduction
8.95.2 Pré-requis
8.95.3 Installation
8.95.4 Configuration à l'exécution
8.95.5 Types de ressources
8.95.6 Exemples
8.95.7 ovrimos_close
8.95.8 ovrimos_commit
8.95.9 ovrimos_connect
8.95.10 ovrimos_cursor
8.95.11 ovrimos_exec
8.95.12 ovrimos_execute
8.95.13 ovrimos_fetch_into
8.95.14 ovrimos_fetch_row
8.95.15 ovrimos_field_len
8.95.16 ovrimos_field_name
8.95.17 ovrimos_field_num
8.95.18 ovrimos_field_type
8.95.19 ovrimos_free_result
8.95.20 ovrimos_longreadlen
8.95.21 ovrimos_num_fields
8.95.22 ovrimos_num_rows
8.95.23 ovrimos_prepare
8.95.24 ovrimos_result_all
8.95.25 ovrimos_result
8.95.26 ovrimos_rollback
8.96 Accès aux fichiers Paradox
8.96.1 Introduction
8.96.2 Pré-requis
8.96.3 Installation
8.96.4 Configuration à l'exécution
8.96.5 API orientée objet
8.96.5.1 Méthodes pour class paradox_doc
8.96.6 Constantes pré-définies
8.96.6.1 Contantes pour les types de champs
8.96.6.2 Contantes pour les types de fichiers
8.96.7 px_close
8.96.8 px_create_fp
8.96.9 px_delete
8.96.10 px_get_field
8.96.11 px_get_info
8.96.12 px_get_parameter
8.96.13 px_get_record
8.96.14 px_get_schema
8.96.15 px_get_value
8.96.16 px_new
8.96.17 px_numfields
8.96.18 px_numrecords
8.96.19 px_open_fp
8.96.20 px_put_record
8.96.21 px_set_blob_file
8.96.22 px_set_parameter
8.96.23 px_set_tablename
8.96.24 px_set_targetencoding
8.96.25 px_set_value
8.96.26 px_timestamp2string
8.97 Fonctions Parsekit
8.97.1 Introduction
8.97.2 Installation
8.97.3 Configuration à l'exécution
8.97.4 Types de ressources
8.97.5 Constantes pré-définies
8.97.6 parsekit_compile_file
8.97.7 parsekit_compile_string
8.97.8 parsekit_func_arginfo
8.98 Contrôle des processus
8.98.1 Introduction
8.98.2 Pré-requis
8.98.3 Installation
8.98.4 Configuration à l'exécution
8.98.5 Types de ressources
8.98.6 Constantes pré-définies
8.98.7 Exemples
8.98.8 Voir aussi
8.98.9 pcntl_alarm
8.98.10 pcntl_exec
8.98.11 pcntl_fork
8.98.12 pcntl_getpriority
8.98.13 pcntl_setpriority
8.98.14 pcntl_signal
8.98.15 pcntl_wait
8.98.16 pcntl_waitpid
8.98.17 pcntl_wexitstatus
8.98.18 pcntl_wifexited
8.98.19 pcntl_wifsignaled
8.98.20 pcntl_wifstopped
8.98.21 pcntl_wstopsig
8.98.22 pcntl_wtermsig
8.99 Expressions rationnelles compatibles Perl
8.99.1 Introduction
8.99.2 Pré-requis
8.99.3 Installation
8.99.4 Configuration à l'exécution
8.99.5 Types de ressources
8.99.6 Constantes pré-définies
8.99.7 Exemples
8.99.8 options de recherche
8.99.9 syntaxe des masques
8.99.9.1 Détails sur les expressions rationnelles
8.99.9.1.1 Introduction
8.99.9.1.2 Méta-caractères
8.99.9.1.3 Anti-slash
8.99.9.1.4 Propriétés des caractères Unicode
8.99.9.1.5 Accent circonflexe et Dollar
8.99.9.1.6 Point
8.99.9.1.7 Crochets
8.99.9.1.8 Barre verticale
8.99.9.1.9 Options internes
8.99.9.1.10 Sous-masques
8.99.9.1.11 Répétitions
8.99.9.1.12 Références arrières
8.99.9.1.13 Assertions
8.99.9.1.14 Sous-masques uniques
8.99.9.1.15 Les sous-masques conditionnels
8.99.9.1.16 Commentaires
8.99.9.1.17 Masques récursifs
8.99.9.1.18 Performances
8.99.10 preg_grep
8.99.11 preg_match_all
8.99.12 preg_match
8.99.13 preg_quote
8.99.14 preg_replace_callback
8.99.15 preg_replace
8.99.16 preg_split
8.100 PDF
8.100.1 Introduction
8.100.2 Pré-requis
8.100.2.1 Problèmes avec les anciennes versions de PDFlib
8.100.3 Installation
8.100.4 Configuration à l'exécution
8.100.5 Confusion entre les vieilles versions de PDFLib
8.100.6 Exemples
8.100.7 Voir aussi
8.100.8 pdf_add_annotation
8.100.9 pdf_add_bookmark
8.100.10 pdf_add_launchlink
8.100.11 pdf_add_locallink
8.100.12 pdf_add_note
8.100.13 pdf_add_outline
8.100.14 pdf_add_pdflink
8.100.15 pdf_add_thumbnail
8.100.16 pdf_add_weblink
8.100.17 pdf_arc
8.100.18 pdf_arcn
8.100.19 pdf_attach_file
8.100.20 pdf_begin_page
8.100.21 pdf_begin_pattern
8.100.22 pdf_begin_template
8.100.23 pdf_circle
8.100.24 pdf_clip
8.100.25 pdf_close_image
8.100.26 pdf_close_pdi_page
8.100.27 pdf_close_pdi
8.100.28 pdf_close
8.100.29 pdf_closepath_fill_stroke
8.100.30 pdf_closepath_stroke
8.100.31 pdf_closepath
8.100.32 pdf_concat
8.100.33 pdf_continue_text
8.100.34 pdf_curveto
8.100.35 pdf_delete
8.100.36 pdf_end_page
8.100.37 pdf_end_pattern
8.100.38 pdf_end_template
8.100.39 pdf_endpath
8.100.40 pdf_fill_stroke
8.100.41 pdf_fill
8.100.42 pdf_findfont
8.100.43 pdf_get_buffer
8.100.44 pdf_get_font
8.100.45 pdf_get_fontname
8.100.46 pdf_get_fontsize
8.100.47 pdf_get_image_height
8.100.48 pdf_get_image_width
8.100.49 pdf_get_majorversion
8.100.50 pdf_get_minorversion
8.100.51 pdf_get_parameter
8.100.52 pdf_get_pdi_parameter
8.100.53 pdf_get_pdi_value
8.100.54 pdf_get_value
8.100.55 pdf_initgraphics
8.100.56 pdf_lineto
8.100.57 pdf_makespotcolor
8.100.58 pdf_moveto
8.100.59 pdf_new
8.100.60 pdf_open_ccitt
8.100.61 pdf_open_file
8.100.62 pdf_open_gif
8.100.63 pdf_open_image_file
8.100.64 pdf_open_image
8.100.65 pdf_open_jpeg
8.100.66 pdf_open_memory_image
8.100.67 pdf_open_pdi_page
8.100.68 pdf_open_pdi
8.100.69 pdf_open_png
8.100.70 pdf_open_tiff
8.100.71 pdf_open
8.100.72 pdf_place_image
8.100.73 pdf_place_pdi_page
8.100.74 pdf_rect
8.100.75 pdf_restore
8.100.76 pdf_rotate
8.100.77 pdf_save
8.100.78 pdf_scale
8.100.79 pdf_set_border_color
8.100.80 pdf_set_border_dash
8.100.81 pdf_set_border_style
8.100.82 pdf_set_char_spacing
8.100.83 pdf_set_duration
8.100.84 pdf_set_font
8.100.85 pdf_set_horiz_scaling
8.100.86 pdf_set_info_author
8.100.87 pdf_set_info_creator
8.100.88 pdf_set_info_keywords
8.100.89 pdf_set_info_subject
8.100.90 pdf_set_info_title
8.100.91 pdf_set_info
8.100.92 pdf_set_leading
8.100.93 pdf_set_parameter
8.100.94 pdf_set_text_matrix
8.100.95 pdf_set_text_pos
8.100.96 pdf_set_text_rendering
8.100.97 pdf_set_text_rise
8.100.98 pdf_set_value
8.100.99 pdf_set_word_spacing
8.100.100 pdf_setcolor
8.100.101 pdf_setdash
8.100.102 pdf_setflat
8.100.103 pdf_setfont
8.100.104 pdf_setgray_fill
8.100.105 pdf_setgray_stroke
8.100.106 pdf_setgray
8.100.107 pdf_setlinecap
8.100.108 pdf_setlinejoin
8.100.109 pdf_setlinewidth
8.100.110 pdf_setmatrix
8.100.111 pdf_setmiterlimit
8.100.112 pdf_setpolydash
8.100.113 pdf_setrgbcolor_fill
8.100.114 pdf_setrgbcolor_stroke
8.100.115 pdf_setrgbcolor
8.100.116 pdf_show_boxed
8.100.117 pdf_show_xy
8.100.118 pdf_show
8.100.119 pdf_skew
8.100.120 pdf_stringwidth
8.100.121 pdf_stroke
8.100.122 pdf_translate
8.101 Fonctions PDO
8.101.1 Introduction
8.101.2 Installation
8.101.2.1 PHP 5.1 et supérieur sur les systèmes Unix
8.101.2.2 PHP 5.0 et supérieur sur les systèmes Unix
8.101.2.3 Utilisateurs de Windows avec PHP 5.1 et supérieur
8.101.3 Configuration à l'exécution
8.101.3.1 pdo.dsn.*
8.101.4 Drivers PDO
8.101.5 Connexions et gestionnaire de connexion
8.101.6 Transactions et validation automatique (auto-commit)
8.101.7 Requêtes préparées et procédures stockées
8.101.8 Erreurs et gestionnaire des erreurs
8.101.9 Les objets larges (LOBs)
8.101.10 Classes pré-définies
8.101.10.1 PDO
8.101.10.1.1 Constructeur
8.101.10.1.2 Méthodes
8.101.10.2 PDOStatement
8.101.10.2.1 Méthodes
8.101.10.3 PDOException
8.101.11 Constantes pré-définies
8.101.12 PDO::beginTransaction
8.101.13 PDO::commit
8.101.14 PDO::__construct
8.101.15 PDO::errorCode
8.101.16 PDO::errorInfo
8.101.17 PDO::exec
8.101.18 PDO::getAttribute
8.101.19 PDO::getAvailableDrivers
8.101.20 PDO::lastInsertId
8.101.21 PDO::prepare
8.101.22 PDO::query
8.101.23 PDO::quote
8.101.24 PDO::rollBack
8.101.25 PDO::setAttribute
8.101.26 PDOStatement::bindColumn
8.101.27 PDOStatement::bindParam
8.101.28 PDOStatement::bindValue
8.101.29 PDOStatement::closeCursor
8.101.30 PDOStatement::columnCount
8.101.31 PDOStatement::errorCode
8.101.32 PDOStatement::errorInfo
8.101.33 PDOStatement::execute
8.101.34 PDOStatement::fetch
8.101.35 PDOStatement::fetchAll
8.101.36 PDOStatement::fetchColumn
8.101.37 PDOStatement::getAttribute
8.101.38 PDOStatement::getColumnMeta
8.101.39 PDOStatement::nextRowset
8.101.40 PDOStatement::rowCount
8.101.41 PDOStatement::setAttribute
8.101.42 PDOStatement::setFetchMode
8.102 Paiement par Verisign
8.102.1 Introduction
8.102.2 Pré-requis
8.102.3 Installation
8.102.4 Configuration à l'exécution
8.102.5 Types de ressources
8.102.6 Constantes pré-définies
8.102.7 pfpro_cleanup
8.102.8 pfpro_init
8.102.9 pfpro_process_raw
8.102.10 pfpro_process
8.102.11 pfpro_version
8.103 PostgreSQL
8.103.1 Introduction
8.103.2 Pré-requis
8.103.3 Installation
8.103.4 Configuration à l'exécution
8.103.4.1 pgsql.allow_persistent
8.103.4.2 pgsql.max_persistent
8.103.4.3 pgsql.max_links
8.103.4.4 pgsql.auto_reset_persistent
8.103.4.5 pgsql.ignore_notice
8.103.4.6 pgsql.log_notice
8.103.5 Types de ressources
8.103.6 Constantes pré-définies
8.103.7 Notes
8.103.8 Exemples
8.103.9 pg_affected_rows
8.103.10 pg_cancel_query
8.103.11 pg_client_encoding
8.103.12 pg_close
8.103.13 pg_connect
8.103.14 pg_connection_busy
8.103.15 pg_connection_reset
8.103.16 pg_connection_status
8.103.17 pg_convert
8.103.18 pg_copy_from
8.103.19 pg_copy_to
8.103.20 pg_dbname
8.103.21 pg_delete
8.103.22 pg_end_copy
8.103.23 pg_escape_bytea
8.103.24 pg_escape_string
8.103.25 pg_execute
8.103.26 pg_fetch_all_columns
8.103.27 pg_fetch_all
8.103.28 pg_fetch_array
8.103.29 pg_fetch_assoc
8.103.30 pg_fetch_object
8.103.31 pg_fetch_result
8.103.32 pg_fetch_row
8.103.33 pg_field_is_null
8.103.34 pg_field_name
8.103.35 pg_field_num
8.103.36 pg_field_prtlen
8.103.37 pg_field_size
8.103.38 pg_field_type_oid
8.103.39 pg_field_type
8.103.40 pg_free_result
8.103.41 pg_get_notify
8.103.42 pg_get_pid
8.103.43 pg_get_result
8.103.44 pg_host
8.103.45 pg_insert
8.103.46 pg_last_error
8.103.47 pg_last_notice
8.103.48 pg_last_oid
8.103.49 pg_lo_close
8.103.50 pg_lo_create
8.103.51 pg_lo_export
8.103.52 pg_lo_import
8.103.53 pg_lo_open
8.103.54 pg_lo_read_all
8.103.55 pg_lo_read
8.103.56 pg_lo_seek
8.103.57 pg_lo_tell
8.103.58 pg_lo_unlink
8.103.59 pg_lo_write
8.103.60 pg_meta_data
8.103.61 pg_num_fields
8.103.62 pg_num_rows
8.103.63 pg_options
8.103.64 pg_parameter_status
8.103.65 pg_pconnect
8.103.66 pg_ping
8.103.67 pg_port
8.103.68 pg_prepare
8.103.69 pg_put_line
8.103.70 pg_query_params
8.103.71 pg_query
8.103.72 pg_result_error_field
8.103.73 pg_result_error
8.103.74 pg_result_seek
8.103.75 pg_result_status
8.103.76 pg_select
8.103.77 pg_send_execute
8.103.78 pg_send_prepare
8.103.79 pg_send_query_params
8.103.80 pg_send_query
8.103.81 pg_set_client_encoding
8.103.82 pg_set_error_verbosity
8.103.83 pg_trace
8.103.84 pg_transaction_status
8.103.85 pg_tty
8.103.86 pg_unescape_bytea
8.103.87 pg_untrace
8.103.88 pg_update
8.103.89 pg_version
8.104 Fonctions POSIX
8.104.1 Introduction
8.104.2 Installation
8.104.3 Constantes pré-définies
8.104.4 Voir aussi
8.104.5 posix_access
8.104.6 posix_ctermid
8.104.7 posix_get_last_error
8.104.8 posix_getcwd
8.104.9 posix_getegid
8.104.10 posix_geteuid
8.104.11 posix_getgid
8.104.12 posix_getgrgid
8.104.13 posix_getgrnam
8.104.14 posix_getgroups
8.104.15 posix_getlogin
8.104.16 posix_getpgid
8.104.17 posix_getpgrp
8.104.18 posix_getpid
8.104.19 posix_getppid
8.104.20 posix_getpwnam
8.104.21 posix_getpwuid
8.104.22 posix_getrlimit
8.104.23 posix_getsid
8.104.24 posix_getuid
8.104.25 posix_isatty
8.104.26 posix_kill
8.104.27 posix_mkfifo
8.104.28 posix_mknod
8.104.29 posix_setegid
8.104.30 posix_seteuid
8.104.31 posix_setgid
8.104.32 posix_setpgid
8.104.33 posix_setsid
8.104.34 posix_setuid
8.104.35 posix_strerror
8.104.36 posix_times
8.104.37 posix_ttyname
8.104.38 posix_uname
8.105 Impression
8.105.1 Introduction
8.105.2 Installation
8.105.3 Configuration à l'exécution
8.105.4 printer_abort
8.105.5 printer_close
8.105.6 printer_create_brush
8.105.7 printer_create_dc
8.105.8 printer_create_font
8.105.9 printer_create_pen
8.105.10 printer_delete_brush
8.105.11 printer_delete_dc
8.105.12 printer_delete_font
8.105.13 printer_delete_pen
8.105.14 printer_draw_bmp
8.105.15 printer_draw_chord
8.105.16 printer_draw_elipse
8.105.17 printer_draw_line
8.105.18 printer_draw_pie
8.105.19 printer_draw_rectangle
8.105.20 printer_draw_roundrect
8.105.21 printer_draw_text
8.105.22 printer_end_doc
8.105.23 printer_end_page
8.105.24 printer_get_option
8.105.25 printer_list
8.105.26 printer_logical_fontheight
8.105.27 printer_open
8.105.28 printer_select_brush
8.105.29 printer_select_font
8.105.30 printer_select_pen
8.105.31 printer_set_option
8.105.32 printer_start_doc
8.105.33 printer_start_page
8.105.34 printer_write
8.106 Création de document PostScript
8.106.1 Introduction
8.106.2 Pré-requis
8.106.3 Installation
8.106.4 Configuration à l'exécution
8.106.5 Constantes pré-définies
8.106.5.1 Constantes pour line caps
8.106.5.2 Constantes pour line joins
8.106.6 Contact Information
8.106.7 ps_add_bookmark
8.106.8 ps_add_launchlink
8.106.9 ps_add_locallink
8.106.10 ps_add_note
8.106.11 ps_add_pdflink
8.106.12 ps_add_weblink
8.106.13 ps_arc
8.106.14 ps_arcn
8.106.15 ps_begin_page
8.106.16 ps_begin_pattern
8.106.17 ps_begin_template
8.106.18 ps_circle
8.106.19 ps_clip
8.106.20 ps_close_image
8.106.21 ps_close
8.106.22 ps_closepath_stroke
8.106.23 ps_closepath
8.106.24 ps_continue_text
8.106.25 ps_curveto
8.106.26 ps_delete
8.106.27 ps_end_page
8.106.28 ps_end_pattern
8.106.29 ps_end_template
8.106.30 ps_fill_stroke
8.106.31 ps_fill
8.106.32 ps_findfont
8.106.33 ps_get_buffer
8.106.34 ps_get_parameter
8.106.35 ps_get_value
8.106.36 ps_hyphenate
8.106.37 ps_lineto
8.106.38 ps_makespotcolor
8.106.39 ps_moveto
8.106.40 ps_new
8.106.41 ps_open_file
8.106.42 ps_open_image_file
8.106.43 ps_open_image
8.106.44 ps_place_image
8.106.45 ps_rect
8.106.46 ps_restore
8.106.47 ps_rotate
8.106.48 ps_save
8.106.49 ps_scale
8.106.50 ps_set_border_color
8.106.51 ps_set_border_dash
8.106.52 ps_set_border_style
8.106.53 ps_set_info
8.106.54 ps_set_parameter
8.106.55 ps_set_text_pos
8.106.56 ps_set_value
8.106.57 ps_setcolor
8.106.58 ps_setdash
8.106.59 ps_setflat
8.106.60 ps_setfont
8.106.61 ps_setgray
8.106.62 ps_setlinecap
8.106.63 ps_setlinejoin
8.106.64 ps_setlinewidth
8.106.65 ps_setmiterlimit
8.106.66 ps_setpolydash
8.106.67 ps_shading_pattern
8.106.68 ps_shading
8.106.69 ps_shfill
8.106.70 ps_show_boxed
8.106.71 ps_show_xy
8.106.72 ps_show
8.106.73 ps_string_geometry
8.106.74 ps_stringwidth
8.106.75 ps_stroke
8.106.76 ps_symbol_name
8.106.77 ps_symbol_width
8.106.78 ps_symbol
8.106.79 ps_translate
8.107 Pspell
8.107.1 Introduction
8.107.2 Pré-requis
8.107.3 Installation
8.107.4 Configuration à l'exécution
8.107.5 Types de ressources
8.107.6 Constantes pré-définies
8.107.7 pspell_add_to_personal
8.107.8 pspell_add_to_session
8.107.9 pspell_check
8.107.10 pspell_clear_session
8.107.11 pspell_config_create
8.107.12 pspell_config_data_dir
8.107.13 pspell_config_dict_dir
8.107.14 pspell_config_ignore
8.107.15 pspell_config_mode
8.107.16 pspell_config_personal
8.107.17 pspell_config_repl
8.107.18 pspell_config_runtogether
8.107.19 pspell_config_save_repl
8.107.20 pspell_new_config
8.107.21 pspell_new_personal
8.107.22 pspell_new
8.107.23 pspell_save_wordlist
8.107.24 pspell_store_replacement
8.107.25 pspell_suggest
8.108 qtdom
8.108.1 Pré-requis
8.108.2 Installation
8.108.3 qdom_error
8.108.4 qdom_tree
8.109 Radius
8.109.1 Introduction
8.109.2 Installation
8.109.3 Constantes pré-définies
8.109.4 Démarrage rapide
8.109.5 Contact
8.109.6 radius_acct_open
8.109.7 radius_add_server
8.109.8 radius_auth_open
8.109.9 radius_close
8.109.10 radius_config
8.109.11 radius_create_request
8.109.12 radius_cvt_addr
8.109.13 radius_cvt_int
8.109.14 radius_cvt_string
8.109.15 radius_demangle_mppe_key
8.109.16 radius_demangle
8.109.17 radius_get_attr
8.109.18 radius_get_vendor_attr
8.109.19 radius_put_addr
8.109.20 radius_put_attr
8.109.21 radius_put_int
8.109.22 radius_put_string
8.109.23 radius_put_vendor_addr
8.109.24 radius_put_vendor_attr
8.109.25 radius_put_vendor_int
8.109.26 radius_put_vendor_string
8.109.27 radius_request_authenticator
8.109.28 radius_send_request
8.109.29 radius_server_secret
8.109.30 radius_strerror
8.110 Rar
8.110.1 Introduction
8.110.2 Pré-requis
8.110.3 Configuration à l'exécution
8.110.4 Installation
8.110.5 Types de ressources
8.110.6 Constantes pré-définies
8.110.7 Exemples
8.110.8 rar_close
8.110.9 rar_entry_get
8.110.10 Rar::extract
8.110.11 Rar::getAttr
8.110.12 Rar::getCrc
8.110.13 Rar::getFileTime
8.110.14 Rar::getHostOs
8.110.15 Rar::getMethod
8.110.16 Rar::getName
8.110.17 Rar::getPackedSize
8.110.18 Rar::getUnpackedSize
8.110.19 Rar::getVersion
8.110.20 rar_list
8.110.21 rar_open
8.111 Readline (GNU)
8.111.1 Introduction
8.111.2 Pré-requis
8.111.3 Installation
8.111.4 Configuration à l'exécution
8.111.5 Types de ressources
8.111.6 Constantes pré-définies
8.111.7 readline_add_history
8.111.8 readline_callback_handler_install
8.111.9 readline_callback_handler_remove
8.111.10 readline_callback_read_char
8.111.11 readline_clear_history
8.111.12 readline_completion_function
8.111.13 readline_info
8.111.14 readline_list_history
8.111.15 readline_on_new_line
8.111.16 readline_read_history
8.111.17 readline_redisplay
8.111.18 readline_write_history
8.111.19 readline
8.112 Recode (GNU)
8.112.1 Introduction
8.112.2 Pré-requis
8.112.3 Installation
8.112.4 Configuration à l'exécution
8.112.5 Types de ressources
8.112.6 Constantes pré-définies
8.112.7 recode_file
8.112.8 recode_string
8.112.9 recode
8.113 Expressions rationnelles
8.113.1 Introduction
8.113.2 Pré-requis
8.113.3 Installation
8.113.4 Configuration à l'exécution
8.113.5 Types de ressources
8.113.6 Constantes pré-définies
8.113.7 Exemples
8.113.8 Voir aussi
8.113.9 ereg_replace
8.113.10 ereg
8.113.11 eregi_replace
8.113.12 eregi
8.113.13 split
8.113.14 spliti
8.113.15 sql_regcase
8.114 Fonctions runkit
8.114.1 Introduction
8.114.2 Pré-requis
8.114.3 Configuration à l'exécution
8.114.3.1 runkit.superglobal
8.114.4 Constantes pré-définies
8.114.5 Runkit_Sandbox
8.114.6 Runkit_Sandbox_Parent
8.114.7 runkit_class_adopt
8.114.8 runkit_class_emancipate
8.114.9 runkit_constant_add
8.114.10 runkit_constant_redefine
8.114.11 runkit_constant_remove
8.114.12 runkit_function_add
8.114.13 runkit_function_copy
8.114.14 runkit_function_redefine
8.114.15 runkit_function_remove
8.114.16 runkit_function_rename
8.114.17 runkit_import
8.114.18 runkit_lint_file
8.114.19 runkit_lint
8.114.20 runkit_method_add
8.114.21 runkit_method_copy
8.114.22 runkit_method_redefine
8.114.23 runkit_method_remove
8.114.24 runkit_method_rename
8.114.25 runkit_return_value_used
8.114.26 runkit_sandbox_output_handler
8.114.27 runkit_superglobals
8.115 Sémaphores et gestion de la mémoire partagée
8.115.1 Introduction
8.115.2 Pré-requis
8.115.3 Installation
8.115.4 Configuration à l'exécution
8.115.5 Types de ressources
8.115.6 Constantes pré-définies
8.115.7 ftok
8.115.8 msg_get_queue
8.115.9 msg_receive
8.115.10 msg_remove_queue
8.115.11 msg_send
8.115.12 msg_set_queue
8.115.13 msg_stat_queue
8.115.14 sem_acquire
8.115.15 sem_get
8.115.16 sem_release
8.115.17 sem_remove
8.115.18 shm_attach
8.115.19 shm_detach
8.115.20 shm_get_var
8.115.21 shm_put_var
8.115.22 shm_remove_var
8.115.23 shm_remove
8.116 SESAM
8.116.1 Introduction
8.116.2 Configuration à l'exécution
8.116.2.1 sesam_oml
8.116.2.2 sesam_configfile
8.116.2.3 sesam_messagecatalog
8.116.3 Notes sur la configuration
8.116.4 Considérations à l'exécution
8.116.5 Types de curseurs
8.116.6 Portage
8.116.7 Sécurité
8.116.8 Migration d'une autre base SQL
8.116.9 Notes sur l'utilisation de types SQL divers
8.116.10 Support des "champs multiples" de SESAM
8.116.11 Voir aussi
8.116.12 sesam_affected_rows
8.116.13 sesam_commit
8.116.14 sesam_connect
8.116.15 sesam_diagnostic
8.116.16 sesam_disconnect
8.116.17 sesam_errormsg
8.116.18 sesam_execimm
8.116.19 sesam_fetch_array
8.116.20 sesam_fetch_result
8.116.21 sesam_fetch_row
8.116.22 sesam_field_array
8.116.23 sesam_field_name
8.116.24 sesam_free_result
8.116.25 sesam_num_fields
8.116.26 sesam_query
8.116.27 sesam_rollback
8.116.28 sesam_seek_row
8.116.29 sesam_settransaction
8.117 Sessions
8.117.1 Introduction
8.117.2 Sessions et sécurité
8.117.3 Pré-requis
8.117.4 Installation
8.117.5 Configuration à l'exécution
8.117.5.1 session.save_handler
8.117.5.2 session.save_path
8.117.5.3 session.name
8.117.5.4 session.auto_start
8.117.5.5 session.serialize_handler
8.117.5.6 session.gc_probability
8.117.5.7 session.gc_divisor
8.117.5.8 session.gc_maxlifetime
8.117.5.9 session.referer_check
8.117.5.10 session.entropy_file
8.117.5.11 session.entropy_length
8.117.5.12 session.use_cookies
8.117.5.13 session.use_only_cookies
8.117.5.14 session.cookie_lifetime
8.117.5.15 session.cookie_path
8.117.5.16 session.cookie_domain
8.117.5.17 session.cookie_secure
8.117.5.18 session.cache_limiter
8.117.5.19 session.cache_expire
8.117.5.20 session.use_trans_sid
8.117.5.21 session.bug_compat_42
8.117.5.22 session.bug_compat_warn
8.117.5.23 session.hash_function
8.117.5.24 session.hash_bits_per_character
8.117.5.25 session.url_rewriter.tags
8.117.6 Types de ressources
8.117.7 Constantes pré-définies
8.117.8 Exemples
8.117.9 Passer l'identifiant de session (session ID)
8.117.10 Gestion personnalisée des sessions
8.117.11 session_cache_expire
8.117.12 session_cache_limiter
8.117.13 session_commit
8.117.14 session_decode
8.117.15 session_destroy
8.117.16 session_encode
8.117.17 session_get_cookie_params
8.117.18 session_id
8.117.19 session_is_registered
8.117.20 session_module_name
8.117.21 session_name
8.117.22 session_regenerate_id
8.117.23 session_register
8.117.24 session_save_path
8.117.25 session_set_cookie_params
8.117.26 session_set_save_handler
8.117.27 session_start
8.117.28 session_unregister
8.117.29 session_unset
8.117.30 session_write_close
8.118 Mémoire partagée
8.118.1 Introduction
8.118.2 Pré-requis
8.118.3 Installation
8.118.4 Configuration à l'exécution
8.118.5 Types de ressources
8.118.6 Constantes pré-définies
8.118.7 Exemples
8.118.8 shmop_close
8.118.9 shmop_delete
8.118.10 shmop_open
8.118.11 shmop_read
8.118.12 shmop_size
8.118.13 shmop_write
8.119 Fonctions SimpleXML
8.119.1 Introduction
8.119.2 Pré-requis
8.119.3 Installation
8.119.4 Exemples
8.119.4.1 simplexml.examples.movie
8.119.5 SimpleXMLElement->asXML
8.119.6 SimpleXMLElement->attributes
8.119.7 SimpleXMLElement->children
8.119.8 SimpleXMLElement->xpath
8.119.9 simplexml_import_dom
8.119.10 simplexml_load_file
8.119.11 simplexml_load_string
8.120 Fonctions SNMP
8.120.1 Introduction
8.120.2 Pré-requis
8.120.3 Installation
8.120.4 Configuration à l'exécution
8.120.5 Types de ressources
8.120.6 Constantes pré-définies
8.120.7 snmp_get_quick_print
8.120.8 snmp_get_valueretrieval
8.120.9 snmp_read_mib
8.120.10 snmp_set_enum_print
8.120.11 snmp_set_oid_numeric_print
8.120.12 snmp_set_quick_print
8.120.13 snmp_set_valueretrieval
8.120.14 snmpget
8.120.15 snmpgetnext
8.120.16 snmprealwalk
8.120.17 snmpset
8.120.18 snmpwalk
8.120.19 snmpwalkoid
8.121 Fonctions SOAP
8.121.1 Introduction
8.121.2 Pré-requis
8.121.3 Installation
8.121.4 Configuration à l'exécution
8.121.4.1 soap.wsdl_cache_enabled
8.121.4.2 soap.wsdl_cache_dir
8.121.4.3 soap.wsdl_cache_ttl
8.121.5 Classes pré-définies
8.121.5.1 SoapClient
8.121.5.1.1 Constructeur
8.121.5.1.2 Méthodes
8.121.5.2 SoapFault
8.121.5.2.1 Constructeur
8.121.5.3 SoapHeader
8.121.5.3.1 Constructeur
8.121.5.4 SoapParam
8.121.5.4.1 Constructeur
8.121.5.5 SoapServer
8.121.5.5.1 Constructeur
8.121.5.5.2 Méthodes
8.121.5.6 SoapVar
8.121.5.6.1 Constructeur
8.121.6 Constantes pré-définies
8.121.7 is_soap_fault
8.121.8 SoapClient->__call()
8.121.9 SoapClient->__construct()
8.121.10 SoapClient->__doRequest()
8.121.11 SoapClient->__getFunctions()
8.121.12 SoapClient->__getLastRequest()
8.121.13 SoapClient->__getLastRequestHeaders()
8.121.14 SoapClient->__getLastResponse()
8.121.15 SoapClient->__getLastResponseHeaders()
8.121.16 SoapClient->__getTypes()
8.121.17 SoapClient->__setCookie()
8.121.18 SoapClient->__soapCall()
8.121.19 SoapFault->__construct()
8.121.20 SoapHeader->__construct()
8.121.21 SoapParam->__construct()
8.121.22 SoapServer->addFunction()
8.121.23 SoapServer->__construct()
8.121.24 SoapServer->fault()
8.121.25 SoapServer->getFunctions()
8.121.26 SoapServer->handle()
8.121.27 SoapServer->setClass()
8.121.28 SoapServer->setPersistence()
8.121.29 SoapVar->__construct()
8.121.30 use_soap_error_handler
8.122 Sockets
8.122.1 Introduction
8.122.2 Pré-requis
8.122.3 Installation
8.122.4 Configuration à l'exécution
8.122.5 Types de ressources
8.122.6 Constantes pré-définies
8.122.7 Erreurs de socket
8.122.8 Exemples
8.122.9 socket_accept
8.122.10 socket_bind
8.122.11 socket_clear_error
8.122.12 socket_close
8.122.13 socket_connect
8.122.14 socket_create_listen
8.122.15 socket_create_pair
8.122.16 socket_create
8.122.17 socket_get_option
8.122.18 socket_getpeername
8.122.19 socket_getsockname
8.122.20 socket_last_error
8.122.21 socket_listen
8.122.22 socket_read
8.122.23 socket_recv
8.122.24 socket_recvfrom
8.122.25 socket_select
8.122.26 socket_send
8.122.27 socket_sendto
8.122.28 socket_set_block
8.122.29 socket_set_nonblock
8.122.30 socket_set_option
8.122.31 socket_shutdown
8.122.32 socket_strerror
8.122.33 socket_write
8.123 Fonctions Standard PHP Library (SPL)
8.123.1 Introduction
8.123.2 Installation
8.123.3 Constantes pré-définies
8.123.4 ArrayIterator::current
8.123.5 ArrayIterator::key
8.123.6 ArrayIterator::next
8.123.7 ArrayIterator::rewind
8.123.8 ArrayIterator::seek
8.123.9 ArrayIterator::valid
8.123.10 ArrayObject::append
8.123.11 ArrayObject::__construct
8.123.12 ArrayObject::count
8.123.13 ArrayObject::getIterator
8.123.14 ArrayObject::offsetExists
8.123.15 ArrayObject::offsetGet
8.123.16 ArrayObject::offsetSet
8.123.17 ArrayObject::offsetUnset
8.123.18 CachingIterator::hasNext
8.123.19 CachingIterator::next
8.123.20 CachingIterator::rewind
8.123.21 CachingIterator::__toString
8.123.22 CachingIterator::valid
8.123.23 CachingRecursiveIterator::getChildren
8.123.24 CachingRecursiveIterator::hasChildren
8.123.25 class_implements
8.123.26 class_parents
8.123.27 DirectoryIterator::__construct
8.123.28 DirectoryIterator::current
8.123.29 DirectoryIterator::getATime
8.123.30 DirectoryIterator::getChildren
8.123.31 DirectoryIterator::getCTime
8.123.32 DirectoryIterator::getFilename
8.123.33 DirectoryIterator::getGroup
8.123.34 DirectoryIterator::getInode
8.123.35 DirectoryIterator::getMTime
8.123.36 DirectoryIterator::getOwner
8.123.37 DirectoryIterator::getPath
8.123.38 DirectoryIterator::getPathname
8.123.39 DirectoryIterator::getPerms
8.123.40 DirectoryIterator::getSize
8.123.41 DirectoryIterator::getType
8.123.42 DirectoryIterator::isDir
8.123.43 DirectoryIterator::isDot
8.123.44 DirectoryIterator::isExecutable
8.123.45 DirectoryIterator::isFile
8.123.46 DirectoryIterator::isLink
8.123.47 DirectoryIterator::isReadable
8.123.48 DirectoryIterator::isWritable
8.123.49 DirectoryIterator::key
8.123.50 DirectoryIterator::next
8.123.51 DirectoryIterator::rewind
8.123.52 DirectoryIterator::valid
8.123.53 FilterIterator::current
8.123.54 FilterIterator::getInnerIterator
8.123.55 FilterIterator::key
8.123.56 FilterIterator::next
8.123.57 FilterIterator::rewind
8.123.58 FilterIterator::valid
8.123.59 iterator_count
8.123.60 iterator_to_array
8.123.61 LimitIterator::getPosition
8.123.62 LimitIterator::next
8.123.63 LimitIterator::rewind
8.123.64 LimitIterator::seek
8.123.65 LimitIterator::valid
8.123.66 ParentIterator::getChildren
8.123.67 ParentIterator::hasChildren
8.123.68 ParentIterator::next
8.123.69 ParentIterator::rewind
8.123.70 RecursiveDirectoryIterator::getChildren
8.123.71 RecursiveDirectoryIterator::hasChildren
8.123.72 RecursiveDirectoryIterator::key
8.123.73 RecursiveDirectoryIterator::next
8.123.74 RecursiveDirectoryIterator::rewind
8.123.75 RecursiveIteratorIterator::current
8.123.76 RecursiveIteratorIterator::getDepth
8.123.77 RecursiveIteratorIterator::getSubIterator
8.123.78 RecursiveIteratorIterator::key
8.123.79 RecursiveIteratorIterator::next
8.123.80 RecursiveIteratorIterator::rewind
8.123.81 RecursiveIteratorIterator::valid
8.123.82 SimpleXMLIterator::current
8.123.83 SimpleXMLIterator::getChildren
8.123.84 SimpleXMLIterator::hasChildren
8.123.85 SimpleXMLIterator::key
8.123.86 SimpleXMLIterator::next
8.123.87 SimpleXMLIterator::rewind
8.123.88 SimpleXMLIterator::valid
8.123.89 spl_classes
8.124 Fonctions SQLite
8.124.1 Introduction
8.124.2 Installation
8.124.3 Pré-requis
8.124.4 Types de ressources
8.124.5 Constantes pré-définies
8.124.6 Classes pré-définies
8.124.6.1 SQLiteDatabase
8.124.6.1.1 Constructeur
8.124.6.1.2 Méthodes
8.124.6.2 SQLiteResult
8.124.6.2.1 Méthodes
8.124.6.3 SQLiteUnbuffered
8.124.6.3.1 Méthodes
8.124.7 Configuration à l'exécution
8.124.7.1 sqlite.assoc_case
8.124.8 sqlite_array_query
8.124.9 sqlite_busy_timeout
8.124.10 sqlite_changes
8.124.11 sqlite_close
8.124.12 sqlite_column
8.124.13 sqlite_create_aggregate
8.124.14 sqlite_create_function
8.124.15 sqlite_current
8.124.16 sqlite_error_string
8.124.17 sqlite_escape_string
8.124.18 sqlite_exec
8.124.19 sqlite_factory
8.124.20 sqlite_fetch_all
8.124.21 sqlite_fetch_array
8.124.22 sqlite_fetch_column_types
8.124.23 sqlite_fetch_object
8.124.24 sqlite_fetch_single
8.124.25 sqlite_fetch_string
8.124.26 sqlite_field_name
8.124.27 sqlite_has_more
8.124.28 sqlite_has_prev
8.124.29 sqlite_key
8.124.30 sqlite_last_error
8.124.31 sqlite_last_insert_rowid
8.124.32 sqlite_libencoding
8.124.33 sqlite_libversion
8.124.34 sqlite_next
8.124.35 sqlite_num_fields
8.124.36 sqlite_num_rows
8.124.37 sqlite_open
8.124.38 sqlite_popen
8.124.39 sqlite_prev
8.124.40 sqlite_query
8.124.41 sqlite_rewind
8.124.42 sqlite_seek
8.124.43 sqlite_single_query
8.124.44 sqlite_udf_decode_binary
8.124.45 sqlite_udf_encode_binary
8.124.46 sqlite_unbuffered_query
8.124.47 sqlite_valid
8.125 Shell2 sécurisé
8.125.1 Introduction
8.125.2 Installation
8.125.3 Constantes pré-définies
8.125.4 ssh2_auth_hostbased_file
8.125.5 ssh2_auth_none
8.125.6 ssh2_auth_password
8.125.7 ssh2_auth_pubkey_file
8.125.8 ssh2_connect
8.125.9 ssh2_exec
8.125.10 ssh2_fetch_stream
8.125.11 ssh2_fingerprint
8.125.12 ssh2_methods_negotiated
8.125.13 ssh2_publickey_add
8.125.14 ssh2_publickey_init
8.125.15 ssh2_publickey_list
8.125.16 ssh2_publickey_remove
8.125.17 ssh2_scp_recv
8.125.18 ssh2_scp_send
8.125.19 ssh2_sftp_lstat
8.125.20 ssh2_sftp_mkdir
8.125.21 ssh2_sftp_readlink
8.125.22 ssh2_sftp_realpath
8.125.23 ssh2_sftp_rename
8.125.24 ssh2_sftp_rmdir
8.125.25 ssh2_sftp_stat
8.125.26 ssh2_sftp_symlink
8.125.27 ssh2_sftp_unlink
8.125.28 ssh2_sftp
8.125.29 ssh2_shell
8.125.30 ssh2_tunnel
8.126 Flux
8.126.1 Introduction
8.126.2 Filtres de flux
8.126.3 Contextes de flux
8.126.4 Installation
8.126.5 Classes Stream
8.126.6 Constantes pré-définies
8.126.7 Erreurs de flux
8.126.8 Exemples
8.126.9 stream_bucket_append
8.126.10 stream_bucket_make_writeable
8.126.11 stream_bucket_new
8.126.12 stream_bucket_prepend
8.126.13 stream_context_create
8.126.14 stream_context_get_default
8.126.15 stream_context_get_options
8.126.16 stream_context_set_option
8.126.17 stream_context_set_params
8.126.18 stream_copy_to_stream
8.126.19 stream_filter_append
8.126.20 stream_filter_prepend
8.126.21 stream_filter_register
8.126.22 stream_filter_remove
8.126.23 stream_get_contents
8.126.24 stream_get_filters
8.126.25 stream_get_line
8.126.26 stream_get_meta_data
8.126.27 stream_get_transports
8.126.28 stream_get_wrappers
8.126.29 stream_register_wrapper
8.126.30 stream_select
8.126.31 stream_set_blocking
8.126.32 stream_set_timeout
8.126.33 stream_set_write_buffer
8.126.34 stream_socket_accept
8.126.35 stream_socket_client
8.126.36 stream_socket_enable_crypto
8.126.37 stream_socket_get_name
8.126.38 stream_socket_pair
8.126.39 stream_socket_recvfrom
8.126.40 stream_socket_sendto
8.126.41 stream_socket_server
8.126.42 stream_wrapper_register
8.126.43 stream_wrapper_restore
8.126.44 stream_wrapper_unregister
8.127 Chaînes de caractères (Strings)
8.127.1 Introduction
8.127.2 Pré-requis
8.127.3 Installation
8.127.4 Constantes pré-définies
8.127.5 Voir aussi
8.127.6 addcslashes
8.127.7 addslashes
8.127.8 bin2hex
8.127.9 chop
8.127.10 chr
8.127.11 chunk_split
8.127.12 convert_cyr_string
8.127.13 convert_uudecode
8.127.14 convert_uuencode
8.127.15 count_chars
8.127.16 crc32
8.127.17 crypt
8.127.18 echo
8.127.19 explode
8.127.20 fprintf
8.127.21 get_html_translation_table
8.127.22 hebrev
8.127.23 hebrevc
8.127.24 html_entity_decode
8.127.25 htmlentities
8.127.26 htmlspecialchars_decode
8.127.27 htmlspecialchars
8.127.28 implode
8.127.29 join
8.127.30 levenshtein
8.127.31 localeconv
8.127.32 ltrim
8.127.33 md5_file
8.127.34 md5
8.127.35 metaphone
8.127.36 money_format
8.127.37 nl_langinfo
8.127.38 nl2br
8.127.39 number_format
8.127.40 ord
8.127.41 parse_str
8.127.42 print
8.127.43 printf
8.127.44 quoted_printable_decode
8.127.45 quotemeta
8.127.46 rtrim
8.127.47 setlocale
8.127.48 sha1_file
8.127.49 sha1
8.127.50 similar_text
8.127.51 soundex
8.127.52 sprintf
8.127.53 sscanf
8.127.54 str_ireplace
8.127.55 str_pad
8.127.56 str_repeat
8.127.57 str_replace
8.127.58 str_rot13
8.127.59 str_shuffle
8.127.60 str_split
8.127.61 str_word_count
8.127.62 strcasecmp
8.127.63 strchr
8.127.64 strcmp
8.127.65 strcoll
8.127.66 strcspn
8.127.67 strip_tags
8.127.68 stripcslashes
8.127.69 stripos
8.127.70 stripslashes
8.127.71 stristr
8.127.72 strlen
8.127.73 strnatcasecmp
8.127.74 strnatcmp
8.127.75 strncasecmp
8.127.76 strncmp
8.127.77 strpbrk
8.127.78 strpos
8.127.79 strrchr
8.127.80 strrev
8.127.81 strripos
8.127.82 strrpos
8.127.83 strspn
8.127.84 strstr
8.127.85 strtok
8.127.86 strtolower
8.127.87 strtoupper
8.127.88 strtr
8.127.89 substr_compare
8.127.90 substr_count
8.127.91 substr_replace
8.127.92 substr
8.127.93 trim
8.127.94 ucfirst
8.127.95 ucwords
8.127.96 vfprintf
8.127.97 vprintf
8.127.98 vsprintf
8.127.99 wordwrap
8.128 Shockwave Flash
8.128.1 Introduction
8.128.2 Pré-requis
8.128.3 Installation
8.128.4 Configuration à l'exécution
8.128.5 Types de ressources
8.128.6 Constantes pré-définies
8.128.7 Exemples
8.128.8 swf_actiongeturl
8.128.9 swf_actiongotoframe
8.128.10 swf_actiongotolabel
8.128.11 swf_actionnextframe
8.128.12 swf_actionplay
8.128.13 swf_actionprevframe
8.128.14 swf_actionsettarget
8.128.15 swf_actionstop
8.128.16 swf_actiontogglequality
8.128.17 swf_actionwaitforframe
8.128.18 swf_addbuttonrecord
8.128.19 swf_addcolor
8.128.20 swf_closefile
8.128.21 swf_definebitmap
8.128.22 swf_definefont
8.128.23 swf_defineline
8.128.24 swf_definepoly
8.128.25 swf_definerect
8.128.26 swf_definetext
8.128.27 swf_endbutton
8.128.28 swf_enddoaction
8.128.29 swf_endshape
8.128.30 swf_endsymbol
8.128.31 swf_fontsize
8.128.32 swf_fontslant
8.128.33 swf_fonttracking
8.128.34 swf_getbitmapinfo
8.128.35 swf_getfontinfo
8.128.36 swf_getframe
8.128.37 swf_labelframe
8.128.38 swf_lookat
8.128.39 swf_modifyobject
8.128.40 swf_mulcolor
8.128.41 swf_nextid
8.128.42 swf_oncondition
8.128.43 swf_openfile
8.128.44 swf_ortho
8.128.45 swf_ortho2
8.128.46 swf_perspective
8.128.47 swf_placeobject
8.128.48 swf_polarview
8.128.49 swf_popmatrix
8.128.50 swf_posround
8.128.51 swf_pushmatrix
8.128.52 swf_removeobject
8.128.53 swf_rotate
8.128.54 swf_scale
8.128.55 swf_setfont
8.128.56 swf_setframe
8.128.57 swf_shapearc
8.128.58 swf_shapecurveto
8.128.59 swf_shapecurveto3
8.128.60 swf_shapefillbitmapclip
8.128.61 swf_shapefillbitmaptile
8.128.62 swf_shapefilloff
8.128.63 swf_shapefillsolid
8.128.64 swf_shapelinesolid
8.128.65 swf_shapelineto
8.128.66 swf_shapemoveto
8.128.67 swf_showframe
8.128.68 swf_startbutton
8.128.69 swf_startdoaction
8.128.70 swf_startshape
8.128.71 swf_startsymbol
8.128.72 swf_textwidth
8.128.73 swf_translate
8.128.74 swf_viewport
8.129 Sybase
8.129.1 Introduction
8.129.2 Pré-requis
8.129.3 Installation
8.129.4 Configuration à l'exécution
8.129.4.1 sybase.allow_persistent
8.129.4.2 sybase.max_persistent
8.129.4.3 sybase.max_links
8.129.4.4 sybase.min_error_severity
8.129.4.5 sybase.min_message_severity
8.129.4.6 sybase.compatability_mode
8.129.4.7 magic_quotes_sybase
8.129.4.8 sybct.allow_persistent
8.129.4.9 sybct.max_persistent
8.129.4.10 sybct.max_links
8.129.4.11 sybct.min_server_severity
8.129.4.12 sybct.min_client_severity
8.129.4.13 sybct.login_timeout
8.129.4.14 sybct.timeout
8.129.4.15 sybct.hostname
8.129.4.16 sybct.deadlock_retry_count
8.129.5 Types de ressources
8.129.6 Constantes pré-définies
8.129.7 sybase_affected_rows
8.129.8 sybase_close
8.129.9 sybase_connect
8.129.10 sybase_data_seek
8.129.11 sybase_deadlock_retry_count
8.129.12 sybase_fetch_array
8.129.13 sybase_fetch_assoc
8.129.14 sybase_fetch_field
8.129.15 sybase_fetch_object
8.129.16 sybase_fetch_row
8.129.17 sybase_field_seek
8.129.18 sybase_free_result
8.129.19 sybase_get_last_message
8.129.20 sybase_min_client_severity
8.129.21 sybase_min_error_severity
8.129.22 sybase_min_message_severity
8.129.23 sybase_min_server_severity
8.129.24 sybase_num_fields
8.129.25 sybase_num_rows
8.129.26 sybase_pconnect
8.129.27 sybase_query
8.129.28 sybase_result
8.129.29 sybase_select_db
8.129.30 sybase_set_message_handler
8.129.31 sybase_unbuffered_query
8.130 Fonctions TCP Wrappers
8.130.1 Introduction
8.130.2 Installation
8.130.3 tcpwrap_check
8.131 Tidy
8.131.1 Introduction
8.131.2 Pré-requis
8.131.3 Installation
8.131.4 Configuration à l'exécution
8.131.4.1 tidy.default_config
8.131.4.2 tidy.clean_output
8.131.5 Types de ressources
8.131.6 Classes pré-définies
8.131.6.1 tidyNode
8.131.6.1.1 Méthodes
8.131.6.1.2 Propriétés
8.131.7 Constantes pré-définies
8.131.8 Exemples
8.131.9 ob_tidyhandler
8.131.10 tidy_access_count
8.131.11 tidy_clean_repair
8.131.12 tidy_config_count
8.131.13 tidy::__construct
8.131.14 tidy_diagnose
8.131.15 tidy_error_count
8.131.16 tidy_get_body
8.131.17 tidy_get_config
8.131.18 tidy_get_error_buffer
8.131.19 tidy_get_head
8.131.20 tidy_get_html_ver
8.131.21 tidy_get_html
8.131.22 tidy_get_opt_doc
8.131.23 tidy_get_output
8.131.24 tidy_get_release
8.131.25 tidy_get_root
8.131.26 tidy_get_status
8.131.27 tidy_getopt
8.131.28 tidy_is_xhtml
8.131.29 tidy_is_xml
8.131.30 tidy_load_config
8.131.31 tidy_node->get_attr
8.131.32 tidy_node->get_nodes
8.131.33 tidy_node->next
8.131.34 tidy_node->prev
8.131.35 tidy_parse_file
8.131.36 tidy_parse_string
8.131.37 tidy_repair_file
8.131.38 tidy_repair_string
8.131.39 tidy_reset_config
8.131.40 tidy_save_config
8.131.41 tidy_set_encoding
8.131.42 tidy_setopt
8.131.43 tidy_warning_count
8.131.44 tidyNode->hasChildren
8.131.45 tidyNode->hasSiblings
8.131.46 tidyNode->isAsp
8.131.47 tidyNode->isComment
8.131.48 tidyNode->isHtml
8.131.49 tidyNode->isJste
8.131.50 tidyNode->isPhp
8.131.51 tidyNode->isText
8.132 Analyseur de code PHP
8.132.1 Introduction
8.132.2 Pré-requis
8.132.3 Installation
8.132.4 Constantes pré-définies
8.132.5 Exemples
8.132.6 token_get_all
8.132.7 token_name
8.133 Fonctions ODBC (unifiés)
8.133.1 Introduction
8.133.2 Pré-requis
8.133.3 Installation
8.133.3.1 --with-adabas[=DIR]
8.133.3.2 --with-sapdb[=DIR]
8.133.3.3 --with-solid[=DIR]
8.133.3.4 --with-ibm-db2[=DIR]
8.133.3.5 --with-empress[=DIR]
8.133.3.6 --with-empress-bcs[=DIR]
8.133.3.7 --with-birdstep[=DIR]
8.133.3.8 --with-custom-odbc[=DIR]
8.133.3.9 --with-iodbc[=DIR]
8.133.3.10 --with-esoob[=DIR]
8.133.3.11 --with-unixodbc[=DIR]
8.133.3.12 --with-openlink[=DIR]
8.133.3.13 --with-dbmaker[=DIR]
8.133.3.14 odbc.configure.php3
8.133.4 Configuration à l'exécution
8.133.4.1 odbc.default_db
8.133.4.2 odbc.default_user
8.133.4.3 odbc.default_pw
8.133.4.4 odbc.allow_persistent
8.133.4.5 odbc.check_persistent
8.133.4.6 odbc.max_persistent
8.133.4.7 odbc.max_links
8.133.4.8 odbc.defaultlrl
8.133.4.9 odbc.defaultbinmode
8.133.5 Types de ressources
8.133.6 Constantes pré-définies
8.133.7 odbc_autocommit
8.133.8 odbc_binmode
8.133.9 odbc_close_all
8.133.10 odbc_close
8.133.11 odbc_columnprivileges
8.133.12 odbc_columns
8.133.13 odbc_commit
8.133.14 odbc_connect
8.133.15 odbc_cursor
8.133.16 odbc_data_source
8.133.17 odbc_do
8.133.18 odbc_error
8.133.19 odbc_errormsg
8.133.20 odbc_exec
8.133.21 odbc_execute
8.133.22 odbc_fetch_array
8.133.23 odbc_fetch_into
8.133.24 odbc_fetch_object
8.133.25 odbc_fetch_row
8.133.26 odbc_field_len
8.133.27 odbc_field_name
8.133.28 odbc_field_num
8.133.29 odbc_field_precision
8.133.30 odbc_field_scale
8.133.31 odbc_field_type
8.133.32 odbc_foreignkeys
8.133.33 odbc_free_result
8.133.34 odbc_gettypeinfo
8.133.35 odbc_longreadlen
8.133.36 odbc_next_result
8.133.37 odbc_num_fields
8.133.38 odbc_num_rows
8.133.39 odbc_pconnect
8.133.40 odbc_prepare
8.133.41 odbc_primarykeys
8.133.42 odbc_procedurecolumns
8.133.43 odbc_procedures
8.133.44 odbc_result_all
8.133.45 odbc_result
8.133.46 odbc_rollback
8.133.47 odbc_setoption
8.133.48 odbc_specialcolumns
8.133.49 odbc_statistics
8.133.50 odbc_tableprivileges
8.133.51 odbc_tables
8.134 URL
8.134.1 Introduction
8.134.2 Pré-requis
8.134.3 Installation
8.134.4 Configuration à l'exécution
8.134.5 Types de ressources
8.134.6 Constantes pré-définies
8.134.7 base64_decode
8.134.8 base64_encode
8.134.9 get_headers
8.134.10 get_meta_tags
8.134.11 http_build_query
8.134.12 parse_url
8.134.13 rawurldecode
8.134.14 rawurlencode
8.134.15 urldecode
8.134.16 urlencode
8.135 Fonctions de gestion des variables
8.135.1 Introduction
8.135.2 Pré-requis
8.135.3 Installation
8.135.4 Configuration à l'exécution
8.135.4.1 unserialize_callback_func
8.135.5 Types de ressources
8.135.6 Constantes pré-définies
8.135.7 debug_zval_dump
8.135.8 doubleval
8.135.9 empty
8.135.10 floatval
8.135.11 get_defined_vars
8.135.12 get_resource_type
8.135.13 gettype
8.135.14 import_request_variables
8.135.15 intval
8.135.16 is_array
8.135.17 is_bool
8.135.18 is_callable
8.135.19 is_double
8.135.20 is_float
8.135.21 is_int
8.135.22 is_integer
8.135.23 is_long
8.135.24 is_null
8.135.25 is_numeric
8.135.26 is_object
8.135.27 is_real
8.135.28 is_resource
8.135.29 is_scalar
8.135.30 is_string
8.135.31 isset
8.135.32 print_r
8.135.33 serialize
8.135.34 settype
8.135.35 strval
8.135.36 unserialize
8.135.37 unset
8.135.38 var_dump
8.135.39 var_export
8.136 vpopmail
8.136.1 Introduction
8.136.2 Installation
8.136.2.1 vpopmail.configure
8.136.3 vpopmail_add_alias_domain_ex
8.136.4 vpopmail_add_alias_domain
8.136.5 vpopmail_add_domain_ex
8.136.6 vpopmail_add_domain
8.136.7 vpopmail_add_user
8.136.8 vpopmail_alias_add
8.136.9 vpopmail_alias_del_domain
8.136.10 vpopmail_alias_del
8.136.11 vpopmail_alias_get_all
8.136.12 vpopmail_alias_get
8.136.13 vpopmail_auth_user
8.136.14 vpopmail_del_domain_ex
8.136.15 vpopmail_del_domain
8.136.16 vpopmail_del_user
8.136.17 vpopmail_error
8.136.18 vpopmail_passwd
8.136.19 vpopmail_set_user_quota
8.137 API windows
8.137.1 Introduction
8.137.2 Pré-requis
8.137.3 Installation
8.137.4 Configuration à l'exécution
8.137.5 Types de ressources
8.137.6 Constantes pré-définies
8.137.7 Exemples
8.137.8 w32api_deftype
8.137.9 w32api_init_dtype
8.137.10 w32api_invoke_function
8.137.11 w32api_register_function
8.137.12 w32api_set_call_method
8.138 WDDX
8.138.1 Introduction
8.138.2 Pré-requis
8.138.3 Installation
8.138.4 Configuration à l'exécution
8.138.5 Types de ressources
8.138.6 Constantes pré-définies
8.138.7 Exemples
8.138.8 wddx_add_vars
8.138.9 wddx_deserialize
8.138.10 wddx_packet_end
8.138.11 wddx_packet_start
8.138.12 wddx_serialize_value
8.138.13 wddx_serialize_vars
8.138.14 wddx_unserialize
8.139 Fonctions xattr
8.139.1 Introduction
8.139.2 Pré-requis
8.139.3 Installation
8.139.4 Constantes pré-définies
8.139.5 xattr_get
8.139.6 xattr_list
8.139.7 xattr_remove
8.139.8 xattr_set
8.139.9 xattr_supported
8.140 Fonctions xdiff
8.140.1 Introduction
8.140.2 Pré-requis
8.140.3 Installation
8.140.4 Constantes pré-définies
8.140.5 xdiff_file_diff_binary
8.140.6 xdiff_file_diff
8.140.7 xdiff_file_merge3
8.140.8 xdiff_file_patch_binary
8.140.9 xdiff_file_patch
8.140.10 xdiff_string_diff_binary
8.140.11 xdiff_string_diff
8.140.12 xdiff_string_merge3
8.140.13 xdiff_string_patch_binary
8.140.14 xdiff_string_patch
8.141 Analyseur syntaxique XML
8.141.1 Introduction
8.141.2 Pré-requis
8.141.3 Installation
8.141.4 Configuration à l'exécution
8.141.5 Types de ressources
8.141.5.1 xml
8.141.6 Constantes pré-définies
8.141.7 gestionnaires d'événements
8.141.8 Problèmes de casse
8.141.9 Codes d'erreurs
8.141.10 Codage des caractères
8.141.11 Exemples
8.141.11.1 Exemple de structure XML
8.141.11.2 Transtypage XML -> HTML
8.141.11.3 Entité externe
8.141.12 utf8_decode
8.141.13 utf8_encode
8.141.14 xml_error_string
8.141.15 xml_get_current_byte_index
8.141.16 xml_get_current_column_number
8.141.17 xml_get_current_line_number
8.141.18 xml_get_error_code
8.141.19 xml_parse_into_struct
8.141.20 xml_parse
8.141.21 xml_parser_create_ns
8.141.22 xml_parser_create
8.141.23 xml_parser_free
8.141.24 xml_parser_get_option
8.141.25 xml_parser_set_option
8.141.26 xml_set_character_data_handler
8.141.27 xml_set_default_handler
8.141.28 xml_set_element_handler
8.141.29 xml_set_end_namespace_decl_handler
8.141.30 xml_set_external_entity_ref_handler
8.141.31 xml_set_notation_decl_handler
8.141.32 xml_set_object
8.141.33 xml_set_processing_instruction_handler
8.141.34 xml_set_start_namespace_decl_handler
8.141.35 xml_set_unparsed_entity_decl_handler
8.142 XML-RPC
8.142.1 Introduction
8.142.2 Pré-requis
8.142.3 Installation
8.142.4 Configuration à l'exécution
8.142.5 Types de ressources
8.142.6 Constantes pré-définies
8.142.7 xmlrpc_decode_request
8.142.8 xmlrpc_decode
8.142.9 xmlrpc_encode_request
8.142.10 xmlrpc_encode
8.142.11 xmlrpc_get_type
8.142.12 xmlrpc_is_fault
8.142.13 xmlrpc_parse_method_descriptions
8.142.14 xmlrpc_server_add_introspection_data
8.142.15 xmlrpc_server_call_method
8.142.16 xmlrpc_server_create
8.142.17 xmlrpc_server_destroy
8.142.18 xmlrpc_server_register_introspection_callback
8.142.19 xmlrpc_server_register_method
8.142.20 xmlrpc_set_type
8.143 XSL
8.143.1 Introduction
8.143.2 Pré-requis
8.143.3 Installation
8.143.4 Classes pré-définies
8.143.4.1 XSLTProcessor
8.143.4.1.1 Constructeur
8.143.4.1.2 Méthodes
8.143.5 Exemples
8.143.6 Constantes pré-définies
8.143.7 XSLTProcessor->__construct()
8.143.8 XSLTProcessor->getParameter()
8.143.9 XSLTProcessor->hasExsltSupport()
8.143.10 XSLTProcessor->importStylesheet()
8.143.11 XSLTProcessor->registerPHPFunctions()
8.143.12 XSLTProcessor->removeParameter()
8.143.13 XSLTProcessor->setParameter()
8.143.14 XSLTProcessor->transformToDoc()
8.143.15 XSLTProcessor->transformToURI()
8.143.16 XSLTProcessor->transformToXML()
8.144 XSLT
8.144.1 Introduction
8.144.2 Pré-requis
8.144.3 Installation
8.144.4 Configuration à l'exécution
8.144.5 Types de ressources
8.144.6 Constantes pré-définies
8.144.7 xslt_backend_info
8.144.8 xslt_backend_name
8.144.9 xslt_backend_version
8.144.10 xslt_create
8.144.11 xslt_errno
8.144.12 xslt_error
8.144.13 xslt_free
8.144.14 xslt_getopt
8.144.15 xslt_process
8.144.16 xslt_set_base
8.144.17 xslt_set_encoding
8.144.18 xslt_set_error_handler
8.144.19 xslt_set_log
8.144.20 xslt_set_object
8.144.21 xslt_set_sax_handler
8.144.22 xslt_set_sax_handlers
8.144.23 xslt_set_scheme_handler
8.144.24 xslt_set_scheme_handlers
8.144.25 xslt_setopt
8.145 YAZ
8.145.1 Introduction
8.145.2 Installation
8.145.3 Configuration à l'exécution
8.145.4 Types de ressources
8.145.5 Constantes pré-définies
8.145.6 Exemples
8.145.7 yaz_addinfo
8.145.8 yaz_ccl_conf
8.145.9 yaz_ccl_parse
8.145.10 yaz_close
8.145.11 yaz_connect
8.145.12 yaz_database
8.145.13 yaz_element
8.145.14 yaz_errno
8.145.15 yaz_error
8.145.16 yaz_es_result
8.145.17 yaz_get_option
8.145.18 yaz_hits
8.145.19 yaz_itemorder
8.145.20 yaz_present
8.145.21 yaz_range
8.145.22 yaz_record
8.145.23 yaz_scan_result
8.145.24 yaz_scan
8.145.25 yaz_schema
8.145.26 yaz_search
8.145.27 yaz_set_option
8.145.28 yaz_sort
8.145.29 yaz_syntax
8.145.30 yaz_wait
8.146 Accès aux fichiers Zip (Lecture seule)
8.146.1 Introduction
8.146.2 Pré-requis
8.146.3 Installation
8.146.4 Configuration à l'exécution
8.146.5 Types de ressources
8.146.6 Constantes pré-définies
8.146.7 Exemples
8.146.8 zip_close
8.146.9 zip_entry_close
8.146.10 zip_entry_compressedsize
8.146.11 zip_entry_compressionmethod
8.146.12 zip_entry_filesize
8.146.13 zip_entry_name
8.146.14 zip_entry_open
8.146.15 zip_entry_read
8.146.16 zip_open
8.146.17 zip_read
8.147 Compression Zlib
8.147.1 Introduction
8.147.2 Pré-requis
8.147.3 Installation
8.147.4 Configuration à l'exécution
8.147.4.1 zlib.output_compression
8.147.4.2 zlib.output_compression_level
8.147.4.3 zlib.output_handler
8.147.5 Types de ressources
8.147.6 Constantes pré-définies
8.147.7 Exemples
8.147.8 gzclose
8.147.9 gzcompress
8.147.10 gzdeflate
8.147.11 gzencode
8.147.12 gzeof
8.147.13 gzfile
8.147.14 gzgetc
8.147.15 gzgets
8.147.16 gzgetss
8.147.17 gzinflate
8.147.18 gzopen
8.147.19 gzpassthru
8.147.20 gzputs
8.147.21 gzread
8.147.22 gzrewind
8.147.23 gzseek
8.147.24 gztell
8.147.25 gzuncompress
8.147.26 gzwrite
8.147.27 readgzfile
8.147.28 zlib_get_coding_type
9 PHP et le moteur interne Zend
9.1 API de flux : les auteurs d'extensions
9.1.1 Présentation
9.1.2 Eléments de bases
9.1.3 Les flux qui sont des ressources
9.2 internals.pdo
9.3 API Zend : Modification du coeur de PHP
9.4 Étendre PHP 3
9.4.1 Créer une fonction PHP
9.4.1.1 Prototypes de fonctions
9.4.1.2 Arguments de fonctions
9.4.1.3 Fonctions à nombre d'arguments variable
9.4.1.4 Utiliser les arguments d'une fonction
9.4.1.5 Gestion de la mémoire dans une fonction
9.4.1.6 Affecter une variable dans la table des symboles
9.4.1.7 Retourne une valeur simple
9.4.1.8 Retourner des valeurs complexes
9.4.1.9 Utilisation de la liste des ressources
9.4.1.10 Utilisation de la table des ressources persistantes
9.4.1.11 Ajouter des directives de configuration à l'exécution
9.4.2 Appeler des fonctions utilisateurs
9.4.2.1 HashTable *function_table
9.4.2.2 pval *object
9.4.2.3 pval *function_name
9.4.2.4 pval *retval
9.4.2.5 int param_count
9.4.2.6 pval *params[]
9.4.3 Rapport d'erreurs
9.4.3.1 E_NOTICE
9.4.3.2 E_WARNING
9.4.3.3 E_ERROR
9.4.3.4 E_PARSE
9.4.3.5 E_CORE_ERROR
9.4.3.6 E_CORE_WARNING
9.4.3.7 E_COMPILE_ERROR
9.4.3.8 E_COMPILE_WARNING
9.4.3.9 E_USER_ERROR
9.4.3.10 E_USER_WARNING
9.4.3.11 E_USER_NOTICE
9.4.3.12 E_ALL
10 FAQ : foire Aux Questions
10.1 Informations générales
10.1.1 Qu'est-ce que PHP ?
10.1.2 Que représente l'acronyme PHP ?
10.1.3 Quelle est la relation entre les versions ?
10.1.4 Puis-je utiliser plusieurs versions de PHP en même temps ?
10.1.5 Quelle est la différence entre PHP 3 et PHP 4 ?
10.1.6
Je pense avoir trouver un bogue ! Qui dois-je contacter ?
10.2 Listes de diffusions
10.2.1 Existe-t-il des listes de diffusions PHP ?
10.2.2 Y a-t-il d'autre communauté ?
10.2.3
Aidez-moi ! Je ne peux visiblement pas m'inscrire/désinscrire à une/d'une
des listes de diffusions !
10.2.4 Y a-t-il une archive des listes de diffusions quelque part ?
10.2.5 Que puis-je demander sur les listes de diffusions ?
10.2.6 Quelle information devrais-je inclure lors de l'écriture de mon message à la
liste de diffusions ?
10.3 Obtenir PHP
10.3.1 Où puis-je obtenir PHP ?
10.3.2 Est-ce que les versions binaires pré-compilées sont disponibles ?
10.3.3
Où puis-je obtenir les bibliothèques dont j'ai besoin pour compiler les
extensions optionnelles de PHP ?
10.3.4 Comment faire fonctionner ces bibliothèques ?
10.3.5
J'ai la dernière version du code source de PHP, téléchargé à partir de
CVS. De quoi ai-je besoin pour le compiler sous Windows ?
10.3.6 Où puis-je trouver le fichier Browser Capabilities ?
10.4 Considérations sur les bases de données
10.4.1
J'ai entendu dire qu'il était possible d'accéder à Microsoft SQL Server
à partir de PHP. Comment est-ce possible?
10.4.2 Puis-je accéder à des bases Microsoft Access
10.4.3
J'ai mis à jour vers PHP 4, et maintenant MySQL me dit toujours
"Warning: MySQL: Unable to save result set in ...". Que se passe-t-il?
10.4.4
PHP 5 n'inclut plus les bibliothèques clientes MySQL, qu'est ce que ça
implique pour moi? Puis-je toujours utiliser MySQL avec PHP? J'essaie
d'utiliser MySQL, mais j'obtiens des erreurs "undefined function".
10.4.5
Après avoir ajouté le support partagé de MySQL, Apache plante dès que
libphp4.so est chargé. Comment résoudre ce problème?
10.4.6
Pourquoi est ce que j'obtiens une erreur comme celle-ci :
"Warning: 0 is not a MySQL result index in <file>
on line <x>" ou "Warning: Supplied argument is not
a valid MySQL result resource in <file> on line <x>?
10.5 FAQ sur l'installation
10.5.1
Pourquoi ne doit-on pas utiliser Apache 2 dans un environnement threadé
multi-processeur de production ?
10.5.2
Unix/Windows : où doit être placé mon fichier
10.5.3
Unix : j'ai installé PHP, mais à chaque fois que je charge un
document, j'obtiens l'erreur 'Document Contains No Data'! Que se
passe-t-il?
10.5.4
Unix : J'ai installé PHP en utilisant des fichiers sources RPM, mais
apache ne traite pas les pages PHP. Que se passe-t-il?
10.5.5
Unix : J'ai installé PHP 3 en utilisant des paquets source RPM, mais
ils ne compilent pas avec le support de la base de données dont j'ai
besoin! Que se passe-t-il?
10.5.6
Unix : J'ai patché Apache avec l'extension FrontPage et subitement, PHP
ne fonctionne plus.
Est-ce que PHP est incompatible avec l'extension FrontPage pour Apache ?
10.5.7
Unix/Windows : J'ai installé PHP, mais lorsque je tente d'accéder à un fichier
contenant un script PHP via mon navigateur, j'obtiens un écran vide.
10.5.8
Unix/Windows : J'ai installé PHP, mais lorsque je tente d'accéder à un fichier contenant un
script PHP via mon navigateur, j'obtiens une erreur de type 'server 500 error'.
10.5.9
Quelques systèmes d'exploitations : J'ai installé PHP sans erreur, mais lorsque
je tente de démarrer Apache, j'obtiens une erreur du type
'
10.5.10
Windows : J'ai installé PHP, mais lorsque j'accède à un fichier contenant un script PHP
via mon navigateur, j'obtiens l'erreur :
10.5.11
Windows : J'ai suivi toutes les instructions, mais je n'arrive toujours pas à faire fonctionner
PHP et IIS ensemble !
10.5.12
Lorsque vous exécutez PHP comme CGI avec IIS, PWS, OmniHTTPD ou Xitami,
j'obtiens l'erreur suivante :
10.5.13
Comment puis-je savoir si mon
10.5.14
Où dois-je ajouter mon répertoire PHP à la variable
10.5.15
Comment rendre le fichier
10.5.16
Est-il possible d'utiliser la négociation sur le contenu fournie par Apache (option
MultiViews) avec PHP ?
10.5.17
Est-ce que PHP est limité au traitement des méthodes GET et POST ?
10.6 Problèmes de compilation
10.6.1
J'ai téléchargé la dernière version des sources de PHP en utilisant
CVS, mais il n'y a pas de script configure!
10.6.2
J'ai des problèmes pour configurer PHP avec Apache.
On m'indique que
10.6.3
Pendant la configuration de PHP (
10.6.4
Quand je lance Apache, j'obtiens le message suivant :
10.6.5
Quand je lance le ./configure, on me dit que les fichiers d'en-tête de
GD, gdbm, ... ne sont pas trouvés!
10.6.6
Quand le fichier
10.6.7
Quand je lance
10.6.8
Au moment de lier PHP, il y a des références indéfinies.
10.6.9
Je ne vois pas comment compiler PHP avec Apache 1.3.
10.6.10
j'ai suivi toutes les étapes pour installer le module Apache sous Unix,
mais malgré tout, mes scripts PHP s'affichent en clair dans mon
navigateur ou celui-ci me demande de sauver le fichier.
10.6.11
Il est dit d'utiliser
10.6.12
Quand j'essaie de compiler Apache avec PHP en module statique en
utilisant
10.6.13
Quand j'esaie de compiler PHP avec
10.6.14
Pendant le
10.6.15
Quand je compile PHP avec le support MySQL, le configure se passe
bien, mais pendant le
10.6.16
Je veux mettre à jour mon PHP. Où puis-je trouver la ligne
10.6.17
Quand je compile PHP avec le support de la bibliothèque GD, j'obtiens des
erreurs de compilation étrange, voire même des erreurs de segmentation.
10.6.18
Quand je compile PHP, j'obtiens des erreurs aléatoires, voire même
tout s'arrête. J'utilise Solaris.
10.7 Utiliser PHP
10.7.1
J'aimerais écrire un script PHP générique qui pourrait traiter les
données provenant de tout formulaire. Comment savoir quelles variables
de la méthode POST sont disponibles ?
10.7.2
Il faut que je convertisse tous les guillemets simples (')
en un anti-slash suivi d'un guillemet simple (\'). Comment le faire
avec une expression regulière ? J'aimerais aussi convertir " en \" et
\ en \\.
10.7.3
Tous mes " se transforment en \" et mes ' en \', comment me débarrasser
de tous ces anti-slashs ? Comment et pourquoi sont-ils apparus ?
10.7.4
Quand je fais ce qui suit, l'affichage se fait dans le mauvais ordre :
10.7.5
Hey, où sont mes nouvelles lignes ?
10.7.6
J'obtiens le message 'Warning: Cannot send session cookie - headers already
sent...' ou 'Cannot add header information - headers already sent...'.
10.7.7
J'ai besoin d'accèder à des informations dans l'en-tête de requête
directement. Comment puis-je le faire ?
10.7.8
Quand j'essaye d'utiliser l'identification avec IIS j'obtiens
10.7.9
Windows: Je ne peux pas accéder aux fichiers partagés sur un autre ordinateur
utilisant IIS
10.7.10
Mon script PHP fonctionne avec IE et Lynx, mais avec Netscape une
portion de ce qui devrait s'afficher manque. Quand j'affiche la source
HTML de la page, je vois le contenu avec IE mais pas avec Netscape.
10.7.11
Comment mélanger XML et PHP ? PHP se plaint de mes balises <?xml !
10.7.12
Comment utiliser PHP avec FrontPage ou d'autres éditeurs HTML qui
insistent pour mettre mon code ailleurs ?
10.7.13
Où puis-je trouver une liste complète des variables pré-définies que je
peux utiliser dans mes scripts PHP ?
10.7.14
Comment puis-je générer des fichiers PDF sans utiliser les bibliothèques
non libres
10.7.15
J'essaye d'accéder à une des variables standard CGI (comme
10.7.16
Quelques directives PHP peuvent également prendre des valeurs d'octets
sténographiées contraitement aux valeurs d'octets uniquement
10.8 PHP et HTML
10.8.1
Quel encodage/décodage ai-je besoin lors du passage d'une valeur via
un formulaire/une URL ?
10.8.2
J'essaye d'utiliser <input type="image"> mais
les variables
10.8.3 Comment créer un tableau dans une balise <form> HTML ?
10.8.4
Comment puis-je récupérer le résultat d'un champs HTML
10.8.5
Comment puis-je passer une variable de Javascript vers PHP ?
10.9 PHP et COM
10.9.1
J'ai compilé une DLL pour calculer quelquechose. Y a-t-il un moyen
d'utiliser cette DLL sous PHP?
10.9.2
Que signifie 'Unsupported variant type: xxxx (0xxxxx)'?
10.9.3
Est-il possible de manipuler des objets visuels en PHP?
10.9.4
Puis-je stocker un objet COM dans une session?
10.9.5
Comment puis-je intercepter des erreurs COM?
10.9.6
Puis-je générer des fichiers DLL à partir de PHP comme je le fais avec
Perl?
10.9.7
Que signifie 'Unable to obtain IDispatch interface for CLSID {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}'?
10.9.8
Comment puis-je utiliser des objets COM à partir d'un serveur distant?
10.9.9
J'obtiens 'DCOM is disabled in C:\path...\scriptname.php on line 6', que
dois-je faire?
10.9.10
Est-il possible de charger/manipuler des objets ActiveX dans une page en
PHP ?
10.9.11
Est-il possible d'obtenir une instance fonctionnelle d'un composant?
10.9.12
Y a-t-il moyen de manipuler un événement envoyé par un objet COM?
10.9.13
J'ai des problèmes quand j'invoque une méthode d'un objet COM qui expose
plus d'une interface. Que puis-je faire?
10.9.14
Bon, PHP fonctionne avec COM, mais qu'en est-il de COM+?
10.9.15
Si PHP peut manipuler des objets COM, peut-on imaginer d'utiliser des
resources de composants, en conjontion avec PHP?
10.10 PHP et les autres langages
10.10.1 PHP contre ASP?
10.10.2 Existe-t-il un convertisseur de ASP vers PHP?
10.10.3 PHP contre Cold Fusion?
10.10.4 PHP contre Perl?
10.11 Migrer de PHP 2 à PHP 3
10.11.1
Migrer de PHP 2 à PHP 3 ?
10.12 Migrer de PHP 3 à PHP 4
10.12.1
Migrer de PHP 3 à PHP 4
10.12.2
Les sessions fonctionnent-elles avec PHP 3 ?
10.12.3
Fonctions incompatibles ?
10.13 Migration de PHP 4 à PHP 5
10.13.1
Migration de PHP 4 à PHP 5
10.13.2
Est-ce que MySQL fonctionne en PHP 5 ? Il semble avoir disparu.
10.13.3
J'ai entendu dire que PHP 5 à un tout nouveau model objet ; est-ce que mon
actuel code objet fonctionne ? Où puis-je trouver des informations concernant
ces nouvelles fonctionnalités ?
10.13.4
Donc, mise à part le nouveau model objet, qu'est-ce qui a changé dans PHP 5 ?
En particulier, existe-t-il une version spécifique du manuel PHP ?
10.14 Questions diverses
10.14.1
Comment puis-je manipuler le manuel compréssé en bzip2 sous Windows ?
10.14.2
Que signifie le caractère "&" devant les arguments dans les déclarations
des fonctions comme la fonction
10.14.3
Comment puis-je gérer la directive
11 Annexes
11.1 Histoire de PHP
11.1.1 Histoire de PHP
11.1.1.1 PHP/FI
11.1.1.2 PHP 3
11.1.1.3 PHP 4
11.1.1.4 PHP 5
11.1.2 Quelques projets liés à PHP
11.1.2.1 PEAR
11.1.2.2 Equipe d'assurance Qualité
11.1.2.3 PHP-GTK
11.1.3 Livres traitant de PHP
11.1.4 Publications sur PHP
11.2 Migration de PHP 4 vers PHP 5
11.2.1 Nouveautés de PHP 5
11.2.2 Incompatibilités avec les version antérieures
11.2.3 CLI et CGI
11.2.4 Migration des fichiers de configuration
11.2.5 Nouvelles fonctions
11.2.6 Nouvelles Directives
11.2.7 Bases de données
11.2.8 Nouveau Modèle Objet
11.2.9 Rapport d'erreurs
11.3 Migration de PHP 3 à PHP 4
11.3.1 Ce qui a changé en PHP 4
11.3.2 Utiliser PHP 3 et PHP 4 simultanément
11.3.3 Migration des fichiers de configuration
11.3.4 Comportement de l'analyseur
11.3.5 Rapport d'erreur
11.3.5.1 Changement de configuration
11.3.5.2 Nouveaux messages d'erreurs
11.3.6 Initialiseur
11.3.7 empty("0")
11.3.8 Fonctions manquantes
11.3.8.1 Fonctions manquantes pour des raisons de structure
11.3.8.2 Fonctions et extensions obsolètes
11.3.8.3 Nouveau statut pour unset
11.3.9 Extensions PHP 3
11.3.10 Substitution de variables dans les chaînes
11.3.11 Cookies
11.3.12 Gestion des variables globales
11.4 Migration de PHP/FI 2 à PHP 3
11.4.1 A propos des incompatibilités en 3.0
11.4.2 old_function
11.4.3 Balises PHP
11.4.4 Syntaxe if...endif
11.4.5 Syntaxe while
11.4.6 Types d'expression
11.4.7 Les messages d'erreur ont changé
11.4.8 Evaluation rapide des booléens
11.4.9 La valeur TRUE / FALSE comme retour de fonctions
11.4.10 Diverses incompatibilités
11.5 Débogueur PHP
11.5.1 A propos du débogueur
11.5.2 Utiliser le débogueur PHP
11.5.3 Protocole du débogueur
11.6 Options de configuration
11.6.1 Listes des options de configuration internes
11.6.1.1 Options de configuration dans PHP 4
11.6.1.1.1 Options diverses
11.6.1.1.1.1 --enable-debug
11.6.1.1.1.2 --with-layout=TYPE
11.6.1.1.1.3 --with-pear=DIR
11.6.1.1.1.4 --without-pear
11.6.1.1.1.5 --enable-sigchild
11.6.1.1.1.6 --disable-rpath
11.6.1.1.1.7 --enable-libgcc
11.6.1.1.1.8 --enable-php-streams
11.6.1.1.1.9 --with-zlib-dir[=DIR]
11.6.1.1.1.10 --enable-trans-sid
11.6.1.1.1.11 --with-tsrm-pthreads
11.6.1.1.1.12 --enable-shared[=PKGS]
11.6.1.1.1.13 --enable-static[=PKGS]
11.6.1.1.1.14 --enable-fast-install[=PKGS]
11.6.1.1.1.15 --with-gnu-ld
11.6.1.1.1.16 --disable-libtool-lock
11.6.1.1.1.17 --with-pic
11.6.1.1.1.18 --enable-memory-limit
11.6.1.1.1.19 --disable-url-fopen-wrapper
11.6.1.1.1.20 --enable-versioning
11.6.1.1.1.21 --with-imsp[=DIR]
11.6.1.1.1.22 --with-mck[=DIR]
11.6.1.1.1.23 --with-mod-dav=DIR
11.6.1.1.1.24 --enable-debugger
11.6.1.1.1.25 --enable-versioning
11.6.1.1.2 Options PHP
11.6.1.1.2.1 --enable-maintainer-mode
11.6.1.1.2.2 --with-config-file-path=PATH
11.6.1.1.2.3 --enable-safe-mode
11.6.1.1.2.4 --with-exec-dir[=DIR]
11.6.1.1.2.5 --enable-magic-quotes
11.6.1.1.2.6 --disable-short-tags
11.6.1.1.3 Options SAPI
11.6.1.1.3.1 --with-aolserver=DIR
11.6.1.1.3.2 --with-apxs[=FILE]
11.6.1.1.3.3 --with-apache[=DIR]
11.6.1.1.3.4 --with-mod_charset
11.6.1.1.3.5 --with-apxs2[=FILE]
11.6.1.1.3.6 --with-caudium=DIR
11.6.1.1.3.7 --disable-cli
11.6.1.1.3.8 --enable-embed[=TYPE]
11.6.1.1.3.9 --with-fhttpd[=DIR]
11.6.1.1.3.10 --with-isapi=DIR
11.6.1.1.3.11 --with-nsapi=DIR
11.6.1.1.3.12 --with-phttpd=DIR
11.6.1.1.3.13 --with-pi3web=DIR
11.6.1.1.3.14 --with-roxen=DIR
11.6.1.1.3.15 --enable-roxen-zts
11.6.1.1.3.16 --with-servlet[=DIR]
11.6.1.1.3.17 --with-thttpd=SRCDIR
11.6.1.1.3.18 --with-tux=MODULEDIR
11.6.1.1.3.19 --with-webjames=SRCDIR
11.6.1.1.3.20 --disable-cgi
11.6.1.1.3.21 --enable-force-cgi-redirect
11.6.1.1.3.22 --enable-discard-path
11.6.1.1.3.23 --with-fastcgi
11.6.1.1.3.24 --enable-fastcgi
11.6.1.1.3.25 --disable-path-info-check
11.7 Directives du php.ini
11.7.1 Liste des directives du php.ini
11.7.2 Description des directives internes du php.ini
11.7.2.1 Options Httpd
11.7.2.2 Options du langage
11.7.2.2.1 short_open_tag
11.7.2.2.2 asp_tags
11.7.2.2.3 precision
11.7.2.2.4 y2k_compliance
11.7.2.2.5 allow_call_time_pass_reference
11.7.2.2.6 expose_php
11.7.2.2.7 zend.ze1_compatibility_mode
11.7.2.3 Limite des ressources
11.7.2.3.1 memory_limit
11.7.2.4 Gestion des données
11.7.2.4.1 track_vars
11.7.2.4.2 arg_separator.output
11.7.2.4.3 arg_separator.input
11.7.2.4.4 variables_order
11.7.2.4.5 auto_globals_jit
11.7.2.4.6 register_globals
11.7.2.4.7 register_argc_argv
11.7.2.4.8 register_long_arrays
11.7.2.4.9 post_max_size
11.7.2.4.10 gpc_order
11.7.2.4.11 auto_prepend_file
11.7.2.4.12 auto_append_file
11.7.2.4.13 default_mimetype
11.7.2.4.14 default_charset
11.7.2.4.15 always_populate_raw_post_data
11.7.2.4.16 allow_webdav_methods
11.7.2.5 Chemins et répertoires
11.7.2.5.1 include_path
11.7.2.5.2 doc_root
11.7.2.5.3 user_dir
11.7.2.5.4 extension_dir
11.7.2.5.5 extension
11.7.2.5.6 cgi.fix_pathinfo
11.7.2.5.7 cgi.force_redirect
11.7.2.5.8 cgi.redirect_status_env
11.7.2.5.9 fastcgi.impersonate
11.7.2.5.10 cgi.rfc2616_headers
11.7.2.6 Chargement de fichiers
11.7.2.6.1 file_uploads
11.7.2.6.2 upload_tmp_dir
11.7.2.6.3 upload_max_filesize
11.7.2.7 SQL général
11.7.2.7.1 sql.safe_mode
11.7.2.8 Directives de configuration de déboguage
11.7.2.8.1 debugger.host
11.7.2.8.2 debugger.port
11.7.2.8.3 debugger.enabled
11.8 Liste des Fuseaux Horaires Supportés
11.8.1 Liste des fuseaux horaires dans le groupe Africa (Afrique)
11.8.2 Liste des fuseaux horaires dans le groupe America (Amérique)
11.8.3 List of timezones in the group Antarctica
11.8.4 List of timezones in the group Arctic
11.8.5 Liste des fuseaux horaires dans le groupe Asia (Asie)
11.8.6 Liste des fuseaux horaires dans le groupe Atlantic (Atlantique)
11.8.7 List of timezones in the group Australia
11.8.8 Liste des fuseaux horaires dans le groupe Europe
11.8.9 Liste des fuseaux horaires dans le groupe Pacific (Pacifique)
11.8.10 Liste des fuseaux horaires dans le groupe Autres
11.9 extensions
11.9.1 extensions.purpose
11.9.1.1 refs.basic
11.9.1.1.1 refs.basic.vartype
11.9.1.1.2 refs.basic.text
11.9.1.1.3 refs.basic.php
11.9.1.1.4 refs.basic.session
11.9.1.1.5 refs.basic.other
11.9.1.2 refs.database
11.9.1.2.1 refs.database.abstract
11.9.1.2.2 refs.database.vendors
11.9.1.3 refs.xml
11.9.1.4 refs.webservice
11.9.1.5 refs.creditcard
11.9.1.6 refs.mathcrypto
11.9.1.6.1 refs.mathcrypto.math
11.9.1.6.2 refs.mathcrypto.crypto
11.9.1.7 refs.international
11.9.1.8 refs.fileprocess
11.9.1.8.1 refs.fileprocess.file
11.9.1.8.2 refs.fileprocess.process
11.9.1.9 refs.remote
11.9.1.9.1 refs.remote.mail
11.9.1.9.2 refs.remote.auth
11.9.1.9.3 refs.remote.other
11.9.1.10 refs.compression
11.9.1.11 refs.calendar
11.9.1.12 refs.utilspec
11.9.1.12.1 refs.utilspec.nontext
11.9.1.12.2 refs.utilspec.image
11.9.1.12.3 refs.utilspec.audio
11.9.1.12.4 refs.utilspec.cmdline
11.9.1.12.5 refs.utilspec.windows
11.9.1.12.6 refs.utilspec.server
11.9.2 extensions.membership
11.9.2.1 extensions.membership.core
11.9.2.2 extensions.membership.bundled
11.9.2.3 extensions.membership.external
11.9.2.4 extensions.membership.pecl
11.9.3 extensions.state
11.9.3.1 extensions.state.deprecated
11.9.3.2 extensions.state.experimental
11.10 Liste des alias
11.11 Mots réservés en PHP
11.11.1 Liste de mots-clé
11.11.2 Variables pré-définies
11.11.2.1 Variables de serveur : $_SERVER
11.11.2.2 Variables d'environnement : $_ENV
11.11.2.3 HTTP Cookies : $_COOKIE
11.11.2.4 HTTP GET variables : $_GET
11.11.2.5 HTTP POST variables : $_POST
11.11.2.6 Variable de téléchargement de fichier via HTTP : $_FILES
11.11.2.7 Variables de requête : $_REQUEST
11.11.2.8 Session variables : $_SESSION
11.11.2.9 Variables globales : $GLOBALS
11.11.2.10 Le dernier message d'erreur : $php_errormsg
11.11.3 Classes pré-définies
11.11.3.1 Classes standards
11.11.3.2 Classes pré-définies en PHP 5
11.11.4 Constantes pré-définies
11.11.4.1 Constantes pré-définies
11.11.4.2 Constantes standards pré-définies
11.12 Types des ressources PHP
11.13 Liste des protocoles supportés
11.13.1 Système de fichiers
11.13.2 Socket
11.13.3 HTTP et HTTPS
11.13.4 FTP et FTPS
11.13.5 Flux d'entrée/sortie
11.13.6 Flux compressés
11.13.7 Shell sécurisé 2
11.13.8 Flux Audio
11.13.9 Gestionnaire de flux
11.14 Liste des filtres standards
11.14.1 Filtres de chaînes de caractères
11.14.2 Filtres de conversion
11.14.3 Filtres de compression
11.14.4 Filtres de chiffrement
11.15 Liste des modes de transports de sockets disponibles
11.15.1 Domaines Internet : TCP, UDP, SSL et TLS
11.15.2 Domaine Unix : UNIX et UDG
11.16 Comparaison de types en PHP
11.17 Liste des token de l'analyseur
11.18 A propos du manuel
11.18.1 Formats
11.18.2 A propos des notes utilisateurs
11.18.3 Comment lire la définition d'une fonction (prototype)
11.18.4 Versions de PHP documentées dans ce manuel
11.18.5 Où trouver plus d'informations sur PHP ?
11.18.6 Comment aider à l'amélioration de la documentation
11.18.7 Comment sont générées les documentations
11.18.8 Traductions
11.18.9 Traduction française
11.19 Open Publication License
11.19.1 I. REQUIREMENTS ON BOTH UNMODIFIED AND MODIFIED VERSIONS
11.19.2 II. COPYRIGHT
11.19.3 III. SCOPE OF LICENSE
11.19.4 IV. REQUIREMENTS ON MODIFIED WORKS
11.19.5 V. GOOD-PRACTICE RECOMMENDATIONS
11.19.6 VI. LICENSE OPTIONS
12 Version HTML Help
13 Index
13.1 Index des fonctions
13.2 Index des concepts
13.3 Index des exemples
|
|
|
|
Services webmasters |
|
|
|
|
